View Full Version : Line out Adapter for AMP -what Next? Dont know what to do

12-01-2005, 02:28 PM
Hi guys
my HU is Concert, NON BOSE.

If I plug Blaupunkt(yellow -see pic)adapter to HU to connect amp- do I have to cut Black adapter in 3 and put it back?

What is this for: on label -see-> OPTION: Remo, Clk , Data, Ena. ???




12-01-2005, 02:29 PM
There is no linking from AW to anywhere. You'll need to upload those pics to another server.

12-01-2005, 02:31 PM

12-01-2005, 03:58 PM
no you shouldn't have to cut anything. On my non-bose concert, I just plugged in the yellow bpunkt end, and plugged in the other two pieces next to it (actually I don't think I even needed to do that because I rewired all my speakers) and that was it. Then I just ran RCA's and a remote lead.

12-01-2005, 04:09 PM
(...and plugged in the other two pieces next to it)

but (above- on pic) -there is a wide black connector -it is imposible to plug it next to the yelow ?

12-01-2005, 06:45 PM
that connector looks like it's aftermarket or something. I don't remeber seeing more than one black/wide connector. The only one I remember is the one below the brown one.

12-02-2005, 08:40 AM
At some point I believe that they switched from a 3 piece connector to what you have.

You may be able to pull the contacts out of the connector and swap them between the two connectors. Otherwise you can cut the wires and splice in the RCA ends.

12-02-2005, 09:48 AM
Where do I buy this blaupunkt adapter and how many preouts does it have. I want to run a 4 channel amp of my concert HU and I don't know if I should get this or just buy two line levels. I also want to run another amp for a sub so I assume I'll just run another line level off my rear speakers?

12-02-2005, 03:22 PM
The black plug has different versions that came on different Model Years:

- One piece (like the one pictured)
- Three piece

I believe that the rest of that black connector is for the factory CD changer. If you don't run a factory CD changer - don't plug it back in, as you don't need it. I'm not 100% sure what the "Option" section is for.

Those Blaupunkt adapters run 4 X channels - FR, FL, RR, RL.

If you want to run your changer - you'll have to get crafty with a small cut-off tool. You'll have to cut the side off that has the line-level outs (the side that you replaced) - being very careful to leave the rest of the leads intact. You'll also need to cut the clip on the edge of the yellow adapter so that the modified black plug will fit back in.

12-02-2005, 04:29 PM
you can buy it here:
look for: Preamp Output Adapter - 4 Channel

Im planning to buy Phatnoise(in 2-3 month) -in that case do I have to put back the rest of the "Black connector" I mean
part with"OPTION and CD"?

Thank you guys for help!