PDA

View Full Version : my car needs a FACE LIFT



ExpLlclT
11-30-2005, 07:13 PM
im thinking about gettin the projector headlights i no where to get cheap ones probly not the best but its ok im not into speding 400 $ on headlights ...



thanks

Poopie
11-30-2005, 07:15 PM
the two peice ecodes are just as good as the one piecers. not a bad choice if you don't want to cut up your fender

ExpLlclT
11-30-2005, 07:20 PM
do you no where to find them kinda cheap?

salz2135
11-30-2005, 07:29 PM
Originally posted by Poopie
the two peice ecodes are just as good as the one piecers. not a bad choice if you don't want to cut up your fender

I don't agree. Valeo makes the one piece euro lights and bosch makes the two piece euro lights. These are trustworthy companies. I've heard bad things about the two-piece lights made my companies like Depo (leaking/cheaply made).

Save your money up and get ecodes. You'll be happy you did.

offroader1006
11-30-2005, 07:30 PM
ebay

ExpLlclT
11-30-2005, 07:42 PM
ebay for one peice headlights ?

offroader1006
11-30-2005, 07:50 PM
if your lucky, maybe

salz2135
11-30-2005, 07:51 PM
ebay for the two-piece Depo lights. i haven't seen a better deal on those elsewhere.

petery11
11-30-2005, 07:52 PM
Don't get those sideskirts, I say stick with OEM S4 skirts, but the Reiger RS4 goes well with it (I have that setup + OEM S4 rear skirt)

ExpLlclT
11-30-2005, 08:07 PM
ya i ment to clarify that but it seems like s4 side skirts r really hard to find .. ? but i'd rather jus have the front bumper first then later but where did you find your front bumper and is it almost as good as OEM ? if not as good

joeya103
11-30-2005, 08:16 PM
skip on the procarparts 2-piece headlights. i used to have them, very cheap quality compared to the Valeo 1-piece ones i have now. plus, they actually melted a little bit because it's such cheap plastic.

i'm not sure about other 2-piece headlights, but don't go with the procarparts ones you're showing there.

ExpLlclT
11-30-2005, 08:18 PM
where did you find your headlights and for how much ? ^^^^

joeya103
11-30-2005, 08:21 PM
Originally posted by ExpLlclT
where did you find your headlights and for how much ? ^^^^

i just paid full price on ecstuning, $400. i also got the wiring harness...

http://www.ecstuning.com/stage/edpd/pagebuild_v2.cgi?make=Audi&engine=1.8T&model=B5%20A4&submodel=FWD&category=Lighting&subcategory=Headlight

the thing about 1-piece for cars earlier than '99 is that you need to cut some metal trim. if you don't want to do any cutting, stick with the 2-piece lights. they don't look as nice though.

ExpLlclT
11-30-2005, 08:24 PM
o i no bout the cuting doesn't bother me a bit oe of my front fenders is dented anyways thx for the input

ExpLlclT
11-30-2005, 08:25 PM
can anyone help me out on the front bumper? and do i just make a grill for it or whats up ?


(my front bumper currently has three gigantic plate mounts and two screw holes along with the dented pop up sprayer area , last owner....)