Who knows these wheels??

[Ze_Nardo6]

Are these stock Rs6 wheels? I need these in my life. Any ideas where to find them? Anyone know specs?

http://i64.tinypic.com/2vkc5f9.jpg

[yas]

They are stock. The OE product is pricey.

There are some good reps out of Europe. I was too lazy to source them, as was my original plan.

[yeuchau]

You can check Hartmann wheel, they make OE replica.

[Blackstallion]

Other than Hartmann this thread below may help...

http://www.audizine.com/forum/showthread.php/654842-C7-RS6-S6-Black-Optic-Replica-Wheels

[MikeDwerks]

The OE ones from the RS6 were 21" I am pretty sure

I considered the 21" replicas you can find easily on eBay for less than $1k but they are too heavy compared to my stock 20's. The one seller I asked said they were 35lbs each, which is a lot of unsprung weight to add

[FastLane1000]

I just installed the Stuttgart 20x9 reps with 255/35/20 Continental DWS 06 tires. The stock 19" sport pkg wheel had Pirelli P6 four season 255/40/19 tires. Both tire and wheel combos weighed exactly 56 lbs on the bathroom scale. Not bad to go from a 19 to 20 with no weight gain. I wouldn't neccesarily trust the bathroom scale for accuracy but I would trust that they both weigh the same. If you take it a step further and trust the bathroom scale and tirerack. The Conti's weigh 24lbs. Which means the RS6 Rep wheel weighs 32 lbs. I ran 20 x 8.5" TSW Bathurst Rotary Forged wheels on my last car. They were advertised to weigh 23 lbs and cost about twice as much as the Reps. I bent one within a month or two and had a lateral wobble in another. This was on a 3200 lb Mazda6. Time will tell how the Reps hold up but I am optimistic. I also had a lateral wobble in an OEM Forged SRT wheel which was on a previous Chrysler SRT8. My point is, I have driven on OEM forged, Middle of the road aftermarket, OEM cast Audi, and now some $700 Reps (among many others). I believe the biggest contributing factor to wheel durability is how much sidewall you have and what you hit on the road. Also, I will always run 38-40lbs of air in any tire with a low profile.

http://i584.photobucket.com/albums/ss286/FastLane1000/IMG_20160916_145418_zpsvf22xuhf.jpg

FastLane '12 A6 Quattro Prestige 3.0T, Uni Stage 2+, Eurocode Sways and bushing stabilizer inserts, 20" RS6 Reps.

[clauuualc]

Those in the first picture are RS6 OEM Wheels.
They are 9.5Jx21" ET25.

Part number is 4G0601025CE. They weigh 15.9kg/rim.
In Europe they cost in average 2000euro/set on ebay.

[tuanxoaiday1992]

it seem like this one
https://www.ebay.com.au/itm/322170963855


Sent from my iPhone using Audizine (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=87676)

[almors]

They are stock RS6 wheels we get in Europe. Mine are all black. I wouldn't get the original Audi ones as I've just had all 4 straightened after 12,500 miles due to them being buckled by regular road use.

https://evhgyq.dm2302.livefilestore.com/y3msAKoqs0HRCSbK7IaqLH3Xov8-Q5y_FC-bJLC_KYyIma1alKdR_ObqizM-tnKn2IWfQgFoho_5SoMFqWS8nsqHo-dkbZ--7M-WN9_r68DwM2nL5yrkn-UiMFLoZ5v1YAFzCD_AkzmWD9sScW8J_54DeZ9DU1QOCIBDfNw_ hJ5msA?width=1024&height=576&cropmode=none

[FastLane1000]

Those in the first picture are RS6 OEM Wheels.
They are 9.5Jx21" ET25.

Part number is 4G0601025CE. They weigh 15.9kg/rim.
In Europe they cost in average 2000euro/set on ebay.

35lbs

[Ze_Nardo6]

Thanks for the responses. The wheels I posted were 21" wheels, not 20" so not sure where some are getting 20" RS6 wheels (do those even exist?).

So in summary, the OEM wheels are very expensive and the replica wheels are heavy as hell. Kind of a dream killer. I knew 21s would be heavy but 35lbs/wheel is a ton of weight.

[Demandred]

You can always swap me for mine if ya send me some nice HREs or Vorsteiners in return ;)

[PennState08]

Sorry if I am misunderstanding this, but do the OEM 21" weigh as much as the 20" replicas? My DPE wheels (20x9) weigh about 21 pounds, but those OEM 21s are very nice.