PDA

View Full Version : Piston Dimensions



YungSavage
08-28-2016, 11:53 PM
I'm going to buy an engine rebuild kit and want to know what the difference between standard, .5mm, and 1mm is. Do I just buy Standard size for all the parts associated with the rebuild?

Sent from my SAMSUNG-SM-G900A using Tapatalk

pkfinn
08-29-2016, 08:26 AM
The .5 and 1 mm sizes refer to oversize diameter. If your block is in good shape, you can go with standard size. If it's worn and needs to be bored, you'll have to go with matching oversize pistons and rings. A good machine shop can advise you.

YungSavage
08-29-2016, 09:21 AM
Alright. Gotcha! Thxs for the info. I appreciate it. :)

Sent from my SAMSUNG-SM-G900A using Tapatalk