PDA

View Full Version : Motor Mount Install



ProfileTrader
08-28-2016, 09:01 PM
I have 1997 A4 FWD 2.8L V6 12v. It appears that if I remove the bracket which the bottom of the motor mount bolts to that this would make removal easier. If so, is there anything important I need to consider. Also can I re-use the nuts to the motor mount and the sway bar.

http://www.mediafire.com/view/5msscb8v5smci8c/MotorMountBracket.jpg

Thanks

Davdraco1
08-29-2016, 04:21 AM
When I did my mounts I removed that bracket and dropped the mounts out of the bottom of the car.