PDA

View Full Version : 01 Awm Coil Pack Harness And Coils To Aeb?



Tanzimur
07-03-2016, 08:45 PM
So my question is, will the stock coil pack harness and coil packs from a 2001 Awm work just as a 2.0t coil pack conversion in the mean time while i wait for the red top 2.0t coils to come in?

GrapeBandit
07-04-2016, 08:15 AM
yes, and yes. as long as you wire the harness in correctly, it will work.

Tanzimur
07-04-2016, 08:57 AM
for sure appreciate the reply! now do i run the same gap with theese coils? or run bigger ones?

GrapeBandit
07-04-2016, 11:06 AM
should be stock gap. the 2.0 coils allow for a larger gap

redline380
07-04-2016, 11:42 AM
Grape is right, but something he didnt mention is you either need to swap valve covers or get hold downs for the coils if using an AEB valvecover

GrapeBandit
07-04-2016, 12:36 PM
Grape is right, but something he didnt mention is you either need to swap valve covers or get hold downs for the coils if using an AEB valvecover
not sure ifthe awm coils need hold downs in an aeb cover, but the 2.0 coils can be ran on aeb without them.

Tanzimur
07-04-2016, 09:34 PM
ye i already have an awm cover, the aeb cover the awm coils get cauhght up in the hole! thanks!