PDA

View Full Version : 2.0tfso oil pressure switch location.



pule333
04-18-2016, 05:31 AM
Hi Guys. Where is it???
Believe me I have searched for a good 40min now. No luck. Maybe some one has a picture of where is it located? Been told it's near oil filter housing.. I must be blind. Trying to relocate my oil pressure sender unit to its location using this http://www.42draftdesigns.com/vw-audi-oil-pressure-relocation-kit/

Thanks

Older_not_Wiser
04-18-2016, 09:04 AM
http://i1290.photobucket.com/albums/b523/Older_Not_Wiser/DSC01040_zpsl9oufjim.jpg

See the brass and silver fitting just below and to the right of the oil filter housing breather to the PCV? That is the 42DD hose hooked up to the OEM oil pressure sender port. The OEM oil pressure sender is on the 42DD block out of the picture.

http://i1290.photobucket.com/albums/b523/Older_Not_Wiser/DSC01041_zpstxjabkpv.jpg

Here is another picture looking from where the oil cooler goes.

pule333
04-18-2016, 09:21 AM
http://i1290.photobucket.com/albums/b523/Older_Not_Wiser/DSC01040_zpsl9oufjim.jpg

See the brass and silver fitting just below and to the right of the oil filter housing breather to the PCV? That is the 42DD hose hooked up to the OEM oil pressure sender port. The OEM oil pressure sender is on the 42DD block out of the picture.

http://i1290.photobucket.com/albums/b523/Older_Not_Wiser/DSC01041_zpstxjabkpv.jpg

Here is another picture looking from where the oil cooler goes.

Nice one mate!!!!! Thanks a lot!!