PDA

View Full Version : For Sale: Parting out a 2007 RS4 4.2engine (BNS)



tjtbelmont
03-21-2016, 06:40 AM
Lost the engine in my 2007 RS4. [evilmad] . Bought a couple to combine and rebuild. I am selling all the left over good parts. I have the following parts.
2 blocks, both with 1 Bad cylinder each. Candidates for sleeving for boost. One of the blocks could be used for oversized JE pistons without sleeves but is missing the lower block.
One crank that lost a rod bearing but is easily repairable.
One complete set of good rods.
One set of cylinder heads complete with cams, etc.
Old style valve covers,
One fuel system with high pressure pumps, lines, injectors.
Upper and lower oil pan,
Sensors,
Timing set with good tensioners, timing covers.
Dampener,
Flywheel and good pressure plate.
Let me know if you would like pictures emailed of any of the components. Thanks, Toby

tjtbelmont
03-21-2016, 06:48 AM
Would also be interested in trading for good parts. I need coil overs, JHM shifter, Front seats? Let me know if you need engine parts and have anything to trade.

wagonlove
03-21-2016, 10:35 PM
Any chance you have a passenger front S4/RS4 style door blade from those project cars? Preferably black but anything works.

sandspeed
03-22-2016, 08:57 AM
How much are you looking to get for everything, minus the rods and worst block?

SweetinsanityTT
03-22-2016, 06:45 PM
You wouldn't happen to have the small aluminum coolant flange that goes between the manifold and PCV Valve. Part # 079133424E or 079133426C. Also sent a PM.

tjtbelmont
03-24-2016, 06:26 AM
I don't have any parts except from the engines minus intake systems. PM me with anything you need and your email and I'll send pictures.

dsgray16
03-30-2016, 10:14 AM
PM'd

IbisRS4
11-08-2017, 09:05 PM
Still have the lower oil pan?

SuperduperScott
11-11-2017, 04:50 PM
Timing chain guide rails?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

shokwav09
04-20-2018, 07:12 PM
Lost the engine in my 2007 RS4. [evilmad] . Bought a couple to combine and rebuild. I am selling all the left over good parts. I have the following parts.
2 blocks, both with 1 Bad cylinder each. Candidates for sleeving for boost. One of the blocks could be used for oversized JE pistons without sleeves but is missing the lower block.
One crank that lost a rod bearing but is easily repairable.
One complete set of good rods.
One set of cylinder heads complete with cams, etc.
Old style valve covers,
One fuel system with high pressure pumps, lines, injectors.
Upper and lower oil pan,
Sensors,
Timing set with good tensioners, timing covers.
Dampener,
Flywheel and good pressure plate.
Let me know if you would like pictures emailed of any of the components. Thanks, Toby

60 for the alternator bracket/mount shipped

Crump3t
04-23-2018, 02:01 PM
How many miles on the fuel system components?