PDA

View Full Version : 2.8 oil pressure sensor wire



kaleil
03-15-2016, 06:38 AM
Hi I'm a new member and I just bought a 2001 audi 2.8q. Upon looking at the car I see the oil pressure sending unit isn't connected and don't see any wires in the area so I was wondering if anyone knew where to look to find this connect.

Davdraco1
03-15-2016, 07:14 AM
I know I'm the 1.8t the sensor is in the oil filter housing. I'm not sure about the 2.8 but I would guess it's around there for you too.

kaleil
03-15-2016, 07:33 AM
Yeah I found the where the sensor plugs in on the oil housing I just can't find the wire to actually plug it

Sent from my LG-H901 using Audizine mobile app

Davdraco1
03-15-2016, 07:41 AM
Is the connector broken off the harness and still connected to the sensor?

kaleil
03-15-2016, 08:21 AM
No it's just the sensor. I just don't know where to look to find the connector

Sent from my LG-H901 using Audizine mobile app

kaleil
03-20-2016, 03:13 PM
So I found a wire with a connector up front but I think it's being ran the wrong way because it doesn't reach behind the oil filter housing does anyone have any idea to what I have going on here?

Sent from my LG-H901 using Audizine mobile app