PDA

View Full Version : 034 Breather Hose Kit for AWM engine



nemick
02-14-2016, 06:01 AM
Has anyone used the 034 Breather Hose Kit? Does it fit? I only ask because I keep seeing posts of 034 silicon hoses not quite fitting correctly and replacing the breather hoses looks like a fairly in-depth job.

nynoah
02-14-2016, 06:36 AM
I run their kit on my car and it works perfect

nemick
02-14-2016, 06:39 AM
Good to know. I'll order it up. Thanks.

nynoah
02-14-2016, 06:56 AM
I also plan to run this soon to compliment the 034 kit. I like to keep as much stock functional as possible.

http://www.performancebyie.com/integrated-engineering-billet-recirculating-catch-can-kit-with-1-2-npt-inlet-outlet

I will remove the top metal crossover pipe and pipe in a hose to the catch can. Then the catch can to the pancake valve in a closed loop system. No smell for me. [:D]

nemick
02-14-2016, 07:39 AM
Sounds like a great plan. I'd be interested to know how it works out.

tar
02-14-2016, 09:04 AM
I have one , it is good quality but expensive for what it is.

I made a setup for 42dd catch can out of silicone and a few fittings(cost ALOT less and does the same job plus I got to route it as I wanted)

OverSpun
02-14-2016, 03:02 PM
I run their kit on my car and it works perfect

Same, no issues.

Turbo_B5
02-14-2016, 03:42 PM
pretty sure its only the turbo inlet pipes have fitment issues.

nemick
02-14-2016, 04:19 PM
pretty sure its only the turbo inlet pipes have fitment issues.

Good to know. Thanks.

MetalMan
02-15-2016, 08:21 AM
It fits just okay for me, a little off but still works well enough.

The thing I dislike the most with 034's silicone is how vapor seems to leech through the silicone, and sort of condense as liquid on the outside. This causes the silicone to trap dust whenever the belly pan is off the car.