PDA

View Full Version : Anyone recommend a good exhaust for an Audi A4 B5 1.8t? (plan on adding TP/DP)



PsorianoPre99A4
02-10-2016, 11:07 PM
Right now I have the stock exhaust with two mufflers and the cat. I want full piping all the way through, anyone have any recommendations? I'm not trying to spend $600-$700 as it much it cost on techtonicstuning. What brands are good with this car? I've heard of magna flow and borla. I also don't want a drone sound, I want light deep sound on acceleration.

MarcRogers
02-11-2016, 08:35 AM
Find your self a shop and get a custom straight and get a Muffler. I'm running hollow cat full 2.5" straight to 3" muffler. Or find someone that welds and save your self some money rather then going to a shop


Sent from my iPhone using Tapatalk

GOODBYNAAIR
02-11-2016, 09:07 AM
there are so many exhaust threads search !

Edit
OK SSAC for other so they dont have to make a new thread.


https://www.youtube.com/watch?v=31RWo4CAh4g


https://www.youtube.com/watch?v=dXJaXkJ8wh8


https://www.youtube.com/watch?v=0elUFX07ybE

SN95Audi87
02-11-2016, 10:55 AM
I went with resonated milltek catback, nice sound and performance without the race boy exhaust note. The way it should of came from factory.

BaseDrifter
02-11-2016, 10:56 AM
I picked up a used Borla catback for $300 and I'm pretty happy with it. Sounds nice, not too loud.

Also running a 034 HFC.

tar
02-11-2016, 01:21 PM
there are so many exhaust threads search !

This it's a daily occurrence these days. And if going custom make sure they can actually mandrel bend,

2.5 is best for up to frankenturbo sized and 3inch is better for big turbo. Ssac, cx racing and similar are basically crap.
Borla, magnaflow, miltek, 42draft designs, and many other company's make quality peices in various sizes.

If I was buying one id go 42draft designs it's got vband options good sizes and uses magnaflow mufflers.

rage385
02-12-2016, 01:39 PM
+1 on the borla. I love mine.

MagnaFlow
02-15-2016, 04:06 PM
Your best option on a budget will probably be to check the sale section for good deals on a used system, or piece the universal components and have them welded. We offer a pretty big selection of mufflers, X-pipes etc that work great for custom exhaust systems. If you have any questions about what to use, feel free to shoot us a call or PM!

Seerlah
02-15-2016, 09:21 PM
I remember back in the days, Magnaglow used to offer a full 3" system for our car. Sad stuff like that is no longer offered.

Sumo337
02-16-2016, 08:01 PM
http://youtu.be/AB0fHC3sPbM


http://youtu.be/aG7id4YQUIw


http://youtu.be/5XCKI715mc4

BaseDrifter
02-16-2016, 10:21 PM
Here's my Borla catback with 034 HFC.


https://www.youtube.com/watch?v=FVfRY7G6Mb4


https://www.youtube.com/watch?v=P9TdFdc0Rm8

PsorianoPre99A4
02-16-2016, 10:23 PM
What Borla and Magnaflow mufflers will fit on my car? I've seen a few on eBay like this http://www.ebay.com/sch/sis.html?_nkw=Borla+ProXS+Muffler+2+5+Off+In+2+5+C tr+Out+14+Case+&_itemId=390465347633

But not sure if they will fit or not, anyone have any experience of doing this?

GOODBYNAAIR
02-17-2016, 03:22 PM
What Borla and Magnaflow mufflers will fit on my car? I've seen a few on eBay like this http://www.ebay.com/sch/sis.html?_nkw=Borla+ProXS+Muffler+2+5+Off+In+2+5+C tr+Out+14+Case+&_itemId=390465347633

But not sure if they will fit or not, anyone have any experience of doing this?

Are you going custom then? really they can be made to fit just need to know what size pipe your going with.

PsorianoPre99A4
02-17-2016, 10:41 PM
Are you going custom then? really they can be made to fit just need to know what size pipe your going with.

I was thinking of doing 3" custom all the way back and remove old resonator until it bends, than from there do stock or 2.5" piping to Borla, is that possible?