CashOne
11-13-2015, 10:48 AM
Hey everyone! (sorry for my bad english ;) )
Its been a long time to make a decision about this rebuild!
I love B8 style front bumper so much and did a lot of searching for any replica for B7. No one which i find liked!
I spent a lot of time thinking how to get it done, maybe I need just to buy a B8 Audi? :D
And one day I did a decision like - If my mind can imagine this, my hands can make it!
And yes! Thanks for some help goes to #AvantBuild (http://www.audizine.com/forum/showthread.php/595884-Audi-B7-A4-Avant-Build-Senior-Project-Accuair-Air-Ride) thread
I call all capital city car wrecks and no one has a B8 S-line and last guy have it on another side of the country! I bought naked S-Line B8 front bumper for 168$(150Euro)
https://farm1.staticflickr.com/691/22936130151_eb1f9847c9_b.jpg (https://flic.kr/p/AWMEpR)
So let's party begins! Mark some approximately line where to cut and go!
https://farm6.staticflickr.com/5823/22924994775_9274c49dc9_b.jpg (https://flic.kr/p/AVNAfB)
Then I removed my B7 non-sline bumper and did some measurements before its NO WAY BACK :D (lost this photo somewhere :( )
https://farm6.staticflickr.com/5677/22506702558_6f9fb8315d_b.jpg (https://flic.kr/p/AhQJxQ)
Katching, looks great I think! To stick them together I used a Cleko locks! works great!
https://farm1.staticflickr.com/612/22303859263_9960b5d01d_b.jpg (https://flic.kr/p/zYV7iD)
https://farm1.staticflickr.com/698/22506651877_b750a54164_b.jpg (https://flic.kr/p/AhQtu2)
https://farm1.staticflickr.com/782/22899022676_dddd25d8bb_b.jpg (https://flic.kr/p/ATvtDN)
After all adjustments I use classic rivets and stick them together forever and used in some spots this (melt it in in both bumpers to make them stiffer together)
https://farm1.staticflickr.com/740/22737012940_d821395da8_b.jpg (https://flic.kr/p/ADc8Nu)
And here I use some aviation adhesive to glue in some foam pieces because B8 bumper is much wider than B7
https://farm6.staticflickr.com/5831/22532858869_6c6379aefa_b.jpg (https://flic.kr/p/Ak9MUH)
Then do small bodywork just to look a bit better and hide a stitches!
https://farm6.staticflickr.com/5828/22911576312_b372b9b382_b.jpg (https://flic.kr/p/AUBPpN)
https://farm1.staticflickr.com/762/22506700998_c2aaab6277_b.jpg (https://flic.kr/p/AhQJ5W)
A real pain in ass was fog light grills because I decide to put a honeycomb style grills, but no one has them on ebay and then I call guy who sold me bumper!
Fog grills - 56$(50Euro) and front Splitter also 56$(50Euro)
https://farm1.staticflickr.com/742/22976740722_93ae01ae85_b.jpg (https://flic.kr/p/B1nNw7)
Now my car is at bodywork shop and I decide to repaint all front and repair my hood (someone at night did some dance on it :( thanks God not on roof)
https://farm1.staticflickr.com/632/22303860903_7b6d79b84b_b.jpg (https://flic.kr/p/zYV7MV)
https://farm6.staticflickr.com/5683/22924995405_b8109d29c9_b.jpg (https://flic.kr/p/AVNArt)
https://farm1.staticflickr.com/683/22936130551_4d07cc13c1_b.jpg (https://flic.kr/p/AWMEwK)
https://farm1.staticflickr.com/579/22597492389_3a5d50e606_b.jpg (https://flic.kr/p/AqS4cK)
DIY Front splitter and interior trim wrapped in real carbon fiber cloth and waiting in line for clear coating :)
Here is one complete part!
https://farm6.staticflickr.com/5796/22366963784_3b83c0a53c_b.jpg (https://flic.kr/p/A5ux5C)
More complete pictures coming soon! Hope I get back my blackbullit next week :)
P.S. Does B8 Non S-Line and S-Line front Fogs are the same or not?
Thanks for attention and hope you like it! :)
Its been a long time to make a decision about this rebuild!
I love B8 style front bumper so much and did a lot of searching for any replica for B7. No one which i find liked!
I spent a lot of time thinking how to get it done, maybe I need just to buy a B8 Audi? :D
And one day I did a decision like - If my mind can imagine this, my hands can make it!
And yes! Thanks for some help goes to #AvantBuild (http://www.audizine.com/forum/showthread.php/595884-Audi-B7-A4-Avant-Build-Senior-Project-Accuair-Air-Ride) thread
I call all capital city car wrecks and no one has a B8 S-line and last guy have it on another side of the country! I bought naked S-Line B8 front bumper for 168$(150Euro)
https://farm1.staticflickr.com/691/22936130151_eb1f9847c9_b.jpg (https://flic.kr/p/AWMEpR)
So let's party begins! Mark some approximately line where to cut and go!
https://farm6.staticflickr.com/5823/22924994775_9274c49dc9_b.jpg (https://flic.kr/p/AVNAfB)
Then I removed my B7 non-sline bumper and did some measurements before its NO WAY BACK :D (lost this photo somewhere :( )
https://farm6.staticflickr.com/5677/22506702558_6f9fb8315d_b.jpg (https://flic.kr/p/AhQJxQ)
Katching, looks great I think! To stick them together I used a Cleko locks! works great!
https://farm1.staticflickr.com/612/22303859263_9960b5d01d_b.jpg (https://flic.kr/p/zYV7iD)
https://farm1.staticflickr.com/698/22506651877_b750a54164_b.jpg (https://flic.kr/p/AhQtu2)
https://farm1.staticflickr.com/782/22899022676_dddd25d8bb_b.jpg (https://flic.kr/p/ATvtDN)
After all adjustments I use classic rivets and stick them together forever and used in some spots this (melt it in in both bumpers to make them stiffer together)
https://farm1.staticflickr.com/740/22737012940_d821395da8_b.jpg (https://flic.kr/p/ADc8Nu)
And here I use some aviation adhesive to glue in some foam pieces because B8 bumper is much wider than B7
https://farm6.staticflickr.com/5831/22532858869_6c6379aefa_b.jpg (https://flic.kr/p/Ak9MUH)
Then do small bodywork just to look a bit better and hide a stitches!
https://farm6.staticflickr.com/5828/22911576312_b372b9b382_b.jpg (https://flic.kr/p/AUBPpN)
https://farm1.staticflickr.com/762/22506700998_c2aaab6277_b.jpg (https://flic.kr/p/AhQJ5W)
A real pain in ass was fog light grills because I decide to put a honeycomb style grills, but no one has them on ebay and then I call guy who sold me bumper!
Fog grills - 56$(50Euro) and front Splitter also 56$(50Euro)
https://farm1.staticflickr.com/742/22976740722_93ae01ae85_b.jpg (https://flic.kr/p/B1nNw7)
Now my car is at bodywork shop and I decide to repaint all front and repair my hood (someone at night did some dance on it :( thanks God not on roof)
https://farm1.staticflickr.com/632/22303860903_7b6d79b84b_b.jpg (https://flic.kr/p/zYV7MV)
https://farm6.staticflickr.com/5683/22924995405_b8109d29c9_b.jpg (https://flic.kr/p/AVNArt)
https://farm1.staticflickr.com/683/22936130551_4d07cc13c1_b.jpg (https://flic.kr/p/AWMEwK)
https://farm1.staticflickr.com/579/22597492389_3a5d50e606_b.jpg (https://flic.kr/p/AqS4cK)
DIY Front splitter and interior trim wrapped in real carbon fiber cloth and waiting in line for clear coating :)
Here is one complete part!
https://farm6.staticflickr.com/5796/22366963784_3b83c0a53c_b.jpg (https://flic.kr/p/A5ux5C)
More complete pictures coming soon! Hope I get back my blackbullit next week :)
P.S. Does B8 Non S-Line and S-Line front Fogs are the same or not?
Thanks for attention and hope you like it! :)