PDA

View Full Version : Question for European/ROW RS5 Owners



Agilis
09-19-2015, 11:14 AM
Hello there,

I just purchased the parts needed to attach the Safety/Warning triangle to the inside of the trunk lid for my North American RS5 and I was wondering if you could help me.

Could you provide me with some pictures of the velco strip with the triangle removed? or any pictures of how that velco strip is oriented would be greatly appreciated.

Thank you.

Reggie
09-20-2015, 06:42 PM
You might post on the European forum

Alister
09-20-2015, 07:42 PM
I have a European spec RS5 and can take a pic for you.

Give me a day or so and I'll get something up for you.

Agilis
09-20-2015, 09:51 PM
I have a European spec RS5 and can take a pic for you.

Give me a day or so and I'll get something up for you.

Thank you very much! Very much appreciate that!

Agilis
09-22-2015, 01:07 PM
Hi Alister, is it possible to provide the pictures soon? I'm going to be installing very soon and really could use the pictures you take for assistance towards the install. Thank you!

JamesRS5
09-22-2015, 08:19 PM
I'll try and get one for you today.

Do you want it with both the triangle installed and removed?

Agilis
09-22-2015, 08:37 PM
I'll try and get one for you today.

Do you want it with both the triangle installed and removed?

That would be perfect! Thank you so much! Just need pictures close up of the triangle removed and pictures with it installed. Take as many as you want, more the better! Again thanks to anyone providing pictures!

Agilis
09-23-2015, 10:33 PM
JamesRS5: If you could take any pictures by Saturday, you would be helping me a lot. I've tried searching for pictures of the warning triangle attachment to boot's lid on ROW versions of the RS5 & I haven't been able to find anything except 2 pictures.

http://images.clickedit.co.uk/6527/64630740.jpg

http://i.ytimg.com/vi/blVCWnemV3Y/maxresdefault.jpg

Which unfortunately are too far away. I'm trying to see what direction you pull the velcro strap in order to tigten it against the warning triangle holder. Do you pull up towards the sky or down towards the ground?

I believe a picture or 2 with the triangle removed would answer that question.

Again, thank you.

JamesRS5
09-25-2015, 07:08 AM
Roger dodge, going down to the car now so will get a few shots.

JamesRS5
09-25-2015, 07:29 AM
Ok, here's a few piccys, to be honest I hadn't looked at how it was installed previously but I don't see how you can get it installed any other way than the corect way.....unless your middle name is Edward Scissor Hands?

http://i2.photobucket.com/albums/y5/James_Hardwick/image.jpg2_zpsncbdqsax.jpg

http://i2.photobucket.com/albums/y5/James_Hardwick/image.jpg1_zpspjws3yte.jpg

http://i2.photobucket.com/albums/y5/James_Hardwick/image.jpg3_zps5ghkqwql.jpg

http://i2.photobucket.com/albums/y5/James_Hardwick/image.jpg4_zpsj6ealzkw.jpg

Agilis
09-25-2015, 12:01 PM
Ok, here's a few piccys, to be honest I hadn't looked at how it was installed previously but I don't see how you can get it installed any other way than the corect way.....unless your middle name is Edward Scissor Hands?

Those pictures are great! Thank you so much! You can install it the other way so that the buckle in the last image is at the bottom. This can happen if you place the plastic piece upside down when putting together the assembly.

Again, thank you very, very, very much!!

Wrong way:
http://imagizer.imageshack.us/v2/150x100q90/540/ggLcn4.jpg (http://imageshack.com/f/f0ggLcn4j)

Right way (Thanks to you)
http://imagizer.imageshack.us/v2/150x100q90/540/R1ETJj.jpg (http://imageshack.com/f/f0R1ETJjj)

JamesRS5
09-25-2015, 12:36 PM
Glad to be of service [:)]

Agilis
10-11-2015, 07:32 PM
James: http://www.audizine.com/forum/showthread.php/672756-RS5-Warning-Triangle-Bracket-Installation-for-Non-ROW-How-to
Please private message me if you have any issues regarding using your images. Thank you.

Thanks again!