034 motor mount stud conversion

[canadianA4B7]

Anyone can tell me the size of the M10 treads on there motor mounts from 034. I have the mounts need new bolts and I cannot wait for them. Looks like a M10x1.5. Anyone can confirm please do.

[audihere06]

Not sure what bolts you are talking about but the mounts use the same lock nut that the stock mounts use.


Sent from my iPhone using Tapatalk

[canadianA4B7]

The solid motor mount now are sold with 2 sets of bolts. A 8mm which fits perfect through the own holes in the frame. And a set of m10 bolts that you have to drill out the mounts on the frame of the cars. So you can choose either m8 or m10 on your own. I just need to know the threads that are inside the motor mounts. I'll take them to a machine shop maybe they'll have a gauge to determine the size of threads

Mods delete this thread I think it's useless. My own fault for not using local resources first. Sorry folks.

[034Motorsport]

The Motorsport Mount Pair should include both M10 -> M8 step studs, and M10 studs when you get it from us. That being said, if you didn't receive them or can't find them, the mount bodies for our Billet Aluminum Motorsport Mounts are tapped for M10x1.5 studs. The ones we supply are approximately 37mm in length. [wrench]

Hope that helps![up]

- Laszlo

B7 Audi A4 2.0T & 3.2L Motorsport Engine Mount Pair (http://store.034motorsport.com/motor-mount-pair-motorsport-b5-b6-b7-and-c5.html?utm_source=audizine&utm_medium=forum&utm_campaign=034-509-0005)

http://store.034motorsport.com/media/catalog/product/cache/1/image/250x250/8e3c886ca7be982fe01f40a38284b5ac/0/3/x034motorsport-billet-solid-engine-mounts-street-track-b5-b6-b7-c5-audi-a4-s4-rs4-a6-allroad-034-509-0005-1.jpg.pagespeed.ic.zmdPzBuSGq.jpg

[canadianA4B7]

[QUOTE=034Motorsport;10900765]The Motorsport Mount Pair should include both M10 -> M8 step studs, and M10 studs when you get it from us. That being said, if you didn't receive them or can't find them, the mount bodies for our Billet Aluminum Motorsport Mounts are tapped for M10x1.5 studs. The ones we supply are approximately 37mm in length. [wrench]

Hope that helps![up]

- Laszlo

Thanx, never recieved, had issues when removing, seems a thread in the nut was cracked, or something tightened fine, when trying to remove it would get a few threads back and then stopped. Thank you for the info.