View Full Version : Koni Coilover Adjustment Problem

10-01-2005, 09:20 PM
Well I got a pair of koni's and im way to low. I want to raise it up at least an inch and a half. They provided me with 1 wrench. So i take my wheels off jack it up... It fits the bottom ring fine. But the top ring it doesnt fit the grooves. Am i supposed to have 2 wrenches? How do I raise it back up with the 1 wrench while its on my car?

10-01-2005, 09:32 PM
The bottom ring is to secure the actual spring perch, which is the top ring, and quite a bit larger. It's hard to do, and will take you like 45minutes a side. You loosen the bottom ring, spin it down the threaded body, then wrench the top one (the spring perch) up to the desired height.

10-01-2005, 09:47 PM
It will fit. Same size wrench for big and small rings. It just takes a while to get the hang of it.

10-01-2005, 09:52 PM
I think i figured it out! Thanks guys!

10-02-2005, 12:28 PM
Originally posted by Ben@SpeedBarn
It will fit. Same size wrench for big and small rings. It just takes a while to get the hang of it.

Yeah and some bloody, greasy knuckles and wrench imprints in your palms.

10-02-2005, 06:28 PM
Yeah I've honestly spent an hour just on one coilover. It goes up soooooo slowly. Is there anyway to make it go faster?

10-02-2005, 06:35 PM
are you just screwing the rings up?? i got a set of spring compressors, compressed the springs the then screwed the rings up. its one more step but it made my life a lot easier!

10-02-2005, 09:00 PM
^^^Good idea. Still, though. I think it's about a 64th of an inch in ride height per wrenching. Not per turn, but per stroke you can make without resetting the wrench.

10-03-2005, 01:00 AM
nah.. i thought the same thing, Y one wrench. I called and they sent me another one lol

10-03-2005, 02:12 AM
i didnt think there was such thing as too low


10-03-2005, 02:32 AM
I use a paint brush and clean off the threads with that. THen lube them up before I start. It helps a lot. Still takes time.

10-03-2005, 04:43 AM
If you have a small strap use it to relieve some of the pressure where the spring binds on the perch.

pics (http://www.audizine.com/forum/showthread.php?s=&threadid=13033)