betyouaint
06-11-2015, 03:26 PM
Okay, so I cheaped out on the conversion when swapping out my SII for an SII+ by buying the RNS-e adapter harness and juggling a couple of wires. Below are a few of the posts I used to guide me...
http://www.audizine.com/forum/showthread.php/442316-Rewiring-symphony-ii-to-rns-e-harness-to-a-symphony-ii-to-symphony-ii
http://www.audizine.com/forum/showthread.php/205869-Help!-Symphony-II-Install-unit-won-t-Turn-on-(
So, not too much of a hassle and everything seems to be working fine except for one small thing. When I turn the ignition off and pull the key while playing an mp3 CD, the next time I get in the car the HU has forgotten the track number and always starts the CD from the first track, not where it left off. I can only think that this has something to do with the way power is removed and applied. In accordance with the threads above (and the pic below), I bridged D15 to D16 as both need power. However, the fact that they are on different pins leads me to believe they need a different feed, maybe one should be switched and the other permanent?
Has anyone else experienced this and if so, what's the solution? Should the D16 be taken from elsewhere?
http://shakeebrahman.com/pictures/audi/symII+/Connector-D.jpg
http://www.audizine.com/forum/showthread.php/442316-Rewiring-symphony-ii-to-rns-e-harness-to-a-symphony-ii-to-symphony-ii
http://www.audizine.com/forum/showthread.php/205869-Help!-Symphony-II-Install-unit-won-t-Turn-on-(
So, not too much of a hassle and everything seems to be working fine except for one small thing. When I turn the ignition off and pull the key while playing an mp3 CD, the next time I get in the car the HU has forgotten the track number and always starts the CD from the first track, not where it left off. I can only think that this has something to do with the way power is removed and applied. In accordance with the threads above (and the pic below), I bridged D15 to D16 as both need power. However, the fact that they are on different pins leads me to believe they need a different feed, maybe one should be switched and the other permanent?
Has anyone else experienced this and if so, what's the solution? Should the D16 be taken from elsewhere?
http://shakeebrahman.com/pictures/audi/symII+/Connector-D.jpg