PDA

View Full Version : v1 or v2 rear guys... how did you install...



AsianA408
09-24-2005, 01:02 PM
the rear mesh grill. the guys at my shop forgot to add them in, so they charged me less. howd u guys install them?

Starting
09-24-2005, 02:12 PM
I used the glue. If I had to do it again I would use the glue as well as drill 2 small holes and put small zip ties through them.

Crisqo
09-24-2005, 05:00 PM
zip tied the mesh on the top...and fiberglassed\putty it to the back..

Axxis
09-24-2005, 05:22 PM
theres these zip tie holders that have like a 3m tape to themm..

works like a charm

SpyderSE2
09-25-2005, 11:23 AM
Get some bendable but firm wire, like a clothes hanger, cut it into 3-4" lengths and use some of the super glue (like the kind to glue on rieger bumper) to secure the wire lenghts around the opening, then put the mesh in and bend the wire through the mesh to secure it. This allows you to easily remove them if you need to.