View Full Version : BFI - B5/B6/B7 Engine & Snub Mounts

Black Forest
03-12-2015, 11:27 AM

After a lengthy period of design and testing we are proud to announce the release of our complete replacement engine mount for Audi B5, B6, and B7 vehicles. We are the first to develop a fully Billet Replacement mount for the Audi/VW Longitudinal platform that retains all of the factory alignment and stress relieving features. The use of billet aluminum instead of cast and an increase in minimum thickness creates a mount that is dramatically stronger than the cast stock mount.


This mount will completely replace your old, tired, hydraulic engine mount. In its factory form, the engine mount is fluid filled by Volkswagen/Audi to aid in creating a softer, cushier ride. This softness is a detriment to performance and overall longevity as the fluid within the mount can often cause premature failure. We eliminate this possibility by replacing the mount completely with our proprietary bushing and bracket/Cup design. Maximizing bushing area while trying to minimize vibration where possible gives our mount the advantage of having the best ride characteristics possible from a urethane bushing mount.

The B5/B6/B7 engine mounts are available in two stages -

STAGE 1 (http://store.blackforestindustries.com/bfib5coreenm.html) with its 65a durometer bushings are geared towards the spirited enthusiast who wants better control over motor movement without the sacrifice of excessive vibrations.

http://blackforestindustries.com/blog/wp-content/uploads/2013/01/stage1.jpg (http://store.blackforestindustries.com/bfib5coreenm.html)

STAGE 2 (http://store.blackforestindustries.com/bfib5coreenm1.html) with its 85a durometer bushings are more for the hardcore enthusiast who is more concerned with performance than cabin vibration - great for spirited runs and track cars. Not recommended for daily driven vehicles!

http://blackforestindustries.com/blog/wp-content/uploads/2013/01/stage2.jpg (http://store.blackforestindustries.com/bfib5coreenm1.html)

These mount is designed to fit 4 and 6 cylinder A4/S4 and VW Passat B5 and 5.5 chassis cars from 1996-2008.5

http://blackforestindustries.com/Vortex_StoreButton.GIF (http://store.blackforestindustries.com/enpe10.html)

Black Forest
03-12-2015, 11:28 AM
http://blackforestindustries.com/VortexImages/b5snub.jpg (http://store.blackforestindustries.com/bfiaub5vwpap.html)

This simple little bushing makes a large difference in the way your car drives and performs. Constructed of noticeably stiffer polyurethane vs. your factory rubber mount our parts are designed to stand up to the abuse of hard or even just spirited street driving. The factory rubber snub mount is notorious for cracking failing causing those mysterious and annoying clunking sounds coming from your drivetrain. Reduce your engine movement and improve shifting with this economical upgrade.

Designed In-house, these mounts are made from the highest quality (75a) durometer polyurethane. Each insert is pressure injection molded to insure a consistent hardness throughout the mount for long life even under hard driving conditions.

http://blackforestindustries.com/Vortex_StoreButton.GIF (http://store.blackforestindustries.com/bfiaub5vwpap.html)

Black Forest
12-17-2015, 12:53 PM
One of our customers bought themselves a set of Stage 1 Motor Mounts for his MK7 GTI!


Black Forest
01-28-2016, 09:07 AM
Compass360 Racing is running BFI Stage 2 mounts in both of their 8V S3s that are currently leading their class at the IMSA Continental Tire Sports Car Challenge!

http://blackforestindustries.com/pictures/Compass360S3.jpg (http://store.blackforestindustries.com)

Black Forest
02-05-2016, 11:45 AM
http://blackforestindustries.com/ThreadBumps/General_Bump.gif (store.blackforestindustries.com)

Black Forest
02-11-2016, 01:41 PM
Throwback Thursday! Going through our old files and found our old PVW print ads. :)

http://blackforestindustries.com/PVW/Images/BFI_PVW_April2013_VF2_700.jpg (http://store.blackforestindustries.com)

Black Forest
02-18-2016, 01:03 PM
@garrettleeharvey (http://www.instagram.com/garrettleeharvey)showing what 75k miles can do to OEM mounts in a MK5.
https://scontent.cdninstagram.com/t51.2885-15/s640x640/sh0.08/e35/12716737_1112806055404495_2033219691_n.jpg?ig_cach e_key=MTE4NTg5MzcxOTQyMzcxMjU1Nw%3D%3D.2.l

Black Forest
03-10-2016, 12:34 PM
@josh_mk6gli (http://www.instagram.com/josh_mk6gli) with our Stage 1 engine mounts in his GLI.

https://scontent.cdninstagram.com/t51.2885-15/s640x640/sh0.08/e35/12825985_1078470285528902_726966681_n.jpg?ig_cache _key=MTIwMDE2MzA2MTU5ODY0NTgxNQ%3D%3D.2.l

03-24-2016, 05:49 PM
Is there special discount for us ?

Black Forest
03-25-2016, 06:09 AM
Is there special discount for us ?

We do not currently offer any sort of discounts other than the free shipping promotion that is going on.

Black Forest
04-08-2016, 12:50 PM
@r32.4275 (http://www.instagram.com/r32.4275) got his Stage 2 mounts custom finished and they look awesome!

https://scontent.cdninstagram.com/t51.2885-15/s640x640/sh0.08/e35/10632498_975308462576236_672316743_n.jpg?ig_cache_ key=MTIyMzk2MzI3NTgwODA2Mzg1Mg%3D%3D.2

Black Forest
04-19-2016, 02:11 PM
http://blackforestindustries.com/VortexBanners/BFI_Banner03.jpg (http://store.blackforestindustries.com/)