PDA

View Full Version : Engine Rebuild Gasket/O-ring Help!



AudiTurbo
03-11-2015, 05:25 AM
So, I am rebuilding my aeb block and got a new head and I need some help on identifying some of the gasket and o-rings I need to buy. Thanks
http://i.imgur.com/5rTZVwA.jpg
http://i.imgur.com/6bADfdP.jpg
http://i.imgur.com/EOk230K.jpg
http://i.imgur.com/4fwKogM.jpg
http://i.imgur.com/FxwvR3s.jpg
http://i.imgur.com/mFuNgNn.jpg
http://i.imgur.com/DZxMEzt.jpg

redline380
03-11-2015, 06:41 AM
If you just searched for the "name of the item" and gasket, youd get it.

-waterpump o ring
-Intermediate shaft seal
-Coolant flange oring (just get a new flange, it comes with one)
-Oil cooler adapter gasket
-block breather gasket
-block breather o ring
-oil return line to pan gasket

AudiTurbo
03-11-2015, 07:22 AM
If you just searched for the "name of the item" and gasket, youd get it.

-waterpump o ring
-Intermediate shaft seal
-Coolant flange oring (just get a new flange, it comes with one)
-Oil cooler adapter gasket
-block breather gasket
-block breather o ring
-oil return line to pan gasket

Thank you so much. The second one is on the oil pump driveshaft. is it called the Intermediate shaft seal?
Also is this the correct coolant flange? http://shop.advanceautoparts.com/p/dorman-oe-solutions-coolant-flange-with-gasket-902-886/10237465-P?searchTerm=coolant+flange

Seerlah
03-11-2015, 07:29 AM
Oil pump shaft is intermediate shaft. Those bearings are also replaceable.

richardodn
03-11-2015, 07:41 AM
The block breather gasket is PN 048103771.
The block breather o-ring is PN N90467301. This is also the same o-ring used by the vent tube that connects to the other side of the breather.

AudiTurbo
03-11-2015, 08:06 AM
Oil pump shaft is intermediate shaft. Those bearings are also replaceable.

But the one on the oil pump shaft is a lot bigger. When I looked on ECS it's a very thin o ring

GrapeBandit
03-11-2015, 08:52 AM
intermediate shaft seal is the same as the cam seal

redline380
03-11-2015, 08:59 AM
intermediate shaft seal is the same as the cam seal

And same as the front crank seal

AudiTurbo
03-11-2015, 09:09 AM
http://www.ecstuning.com/Audi-B5_A4-Quattro-1.8T/ES260091/
This is what it shows for the intermediate shaft o-ring.
So if I'm replacing the cam seals (2) front crank seal (1) and the intermediate seal I can just get 4 of these? http://shop.advanceautoparts.com/p/beck-arnley-camshaft-crank-intermediate-shaft-seal-052-3139/18020194-P

GrapeBandit
03-11-2015, 09:54 AM
And same as the front crank seal

exactly.

also, as most of you guys know im in the middle of my 20/20 buold right now, I ordered most of my gaskets from FCP as they had the cheapest price

woolveren
03-11-2015, 11:25 AM
But the one on the oil pump shaft is a lot bigger. When I looked on ECS it's a very thin o ring


http://www.ecstuning.com/Audi-B5_A4-Quattro-1.8T/ES260091/
This is what it shows for the intermediate shaft o-ring.
So if I'm replacing the cam seals (2) front crank seal (1) and the intermediate seal I can just get 4 of these? http://shop.advanceautoparts.com/p/beck-arnley-camshaft-crank-intermediate-shaft-seal-052-3139/18020194-P

The thin O-ring(N90353501) is the one going between the guide ring and intermediate shaft. The actual intermediate shaft seal which these guys above are telling is 068103085E, which is same as the camshaft seal. I have changed all these last year when TB was replaced.

Also, don't get cheap gaskets from parts stores. Make sure you get either Erling, Reinz or Genuine Audi gaskets, you probably know why I am saying this.. Same with the coolant flange and its gaskets, buy genuine VW/Audi only. Period.

AudiTurbo
03-11-2015, 12:09 PM
Okay, Thanks!