View Full Version : February Free Labor With a Stage 2 Unitronic software and KMD Pulleyn Purchase
Support@KMDtuning
02-07-2015, 08:41 AM
From now through the end of February KMD Tuning and Engineering is offering free labor on your Stage 2+ pulley installation and flash. That means schedule an appointment at KMD tuning. Then drive to KMD Tuning. Then pay $1600+Tax wait a few hours and you're on the road Stage 2+ with over 100 more HP at your right foot's disposal. Contact us at
[email protected] or call (201) 773-9171 for appointments!
aysix
02-07-2015, 09:13 AM
i used mspaint once
Support@KMDtuning
02-07-2015, 09:28 AM
The theme was cheesy valentines. Like a cut a paste valentine note. It has been removed.
the4siswickid
02-07-2015, 01:05 PM
I wish you were closer...
Sent from my iPad using Tapatalk
droopy1592
02-07-2015, 01:59 PM
Damn! I need this in ga. Wanna stage two right now
treejs4
02-07-2015, 07:02 PM
Did exactly this a few weeks ago and couldn't be happier with my s4 now! I have nothing but great things to say about Danny and his staff at KMD!
Gkit19986
02-07-2015, 10:29 PM
Will be calling you very shortly..
Support@KMDtuning
02-09-2015, 06:54 AM
Will be calling you very shortly..
Sounds good!
Support@KMDtuning
02-09-2015, 08:24 AM
http://i738.photobucket.com/albums/xx22/KMDTuning/3L%20Supercharged%20TFSI%20installations/Kanye%20Feel%20add_zps3b1gnfc7.jpg
Cooper993
02-09-2015, 04:23 PM
http://i738.photobucket.com/albums/xx22/KMDTuning/3L%20Supercharged%20TFSI%20installations/Kanye%20Feel%20add_zps3b1gnfc7.jpg
You should offer 10% off just for making us look at that [:)]
doug97gxe
02-09-2015, 04:32 PM
You should offer 10% off just for making us look at that [:)]
10% off what he is charging for labor
doug97gxe
02-09-2015, 04:32 PM
i don't think you guys realize that he is giving you $250-$400 off in this deal
Cooper993
02-09-2015, 05:04 PM
It was a joke. Notice the "[:)]"?
doug97gxe
02-09-2015, 05:38 PM
Touche'
brucebanner
02-09-2015, 07:43 PM
Dang I'm getting this done next week, wish my shop would offer free labor.
maxmil2224
02-09-2015, 08:49 PM
Such a great deal guys!
srt2evo
02-10-2015, 03:30 PM
So is this a unitronic pulley, or a KMD one?
Support@KMDtuning
02-13-2015, 09:39 AM
KMD Pulley. They are all the same size. Ours is an a stainless steel pulley (only one we know of that is stainless) and a Black Oxide finish. But all pulleys are the same size, which is what matters to the tune.
doug97gxe
02-13-2015, 09:59 AM
what is the difference in using a stainless steel pulley vs the others
Support@KMDtuning
02-13-2015, 10:09 AM
We started off knowing we wanted steel or stronger for wear resistance. It was more expensive for us to go with stainless because it is harder to cut, but because of its strength we knew we would have better result with pullies that were older, and hopefully resale would be better for the end user as well. The Black Oxide coating looked the most stock and doesn't chip easily. Even if the pulley coating wears away the stainless steel pulley material won't corrode. Essentially it was designed to easily last 100,000+ miles without any re-coating or wear.
RainJer
02-13-2015, 10:15 AM
Killer deal, wish I was in the area [up]
How much more would it cost to install a plow on front of an S4? I have a friend in Boston that may be interested LOL!
Support@KMDtuning
02-13-2015, 10:28 AM
We prefer attaching snowblowers on the front. Less stress on the subframe and the alignment holds longer. Here is a nice closeup of our pulley.http://i738.photobucket.com/albums/xx22/KMDTuning/3L%20Supercharged%20TFSI%20installations/pulley_zpsgxavxri6.jpg
phillips2024
02-14-2015, 04:37 AM
hm....maybe i should make the trip down then visit phil at detailers domain ahha