PDA

View Full Version : machine intermediate shaft for 058 stroker



GrapeBandit
02-03-2015, 10:41 AM
yes I already googled and came up with nothing. who can machine the intermediate shaft so it can clear for a stroker build?[wrench]

Seerlah
02-03-2015, 11:02 AM
You can buy them pre machined. I'll post a link when I get home.

GrapeBandit
02-03-2015, 11:03 AM
You can buy them pre machined. I'll post a link when I get home.
cool, thanks. I may or may not go aba crank. most likely will though. .

034Motorsport
02-03-2015, 11:11 AM
USRT sells them here: http://www.usrallyteam.com/index.php?main_page=product_info&products_id=1226

Tell Scotty that Laszlo from 034 says hello! [:)]

un1ko
02-03-2015, 11:12 AM
yes I already googled and came up with nothing. who can machine the intermediate shaft so it can clear for a stroker build?[wrench]

A machine shop can do that for you or you can contact Issam - http://www.inaengineering.com/

I'd go with a machine shop first.


Edit: I was working and I forgot to post. Lol!

GrapeBandit
02-03-2015, 11:20 AM
A machine shop can do that for you or you can contact Issam - http://www.inaengineering.com/

I'd go with a machine shop first.


Edit: I was working and I forgot to post. Lol!
id go with a local machine shop first if I had the specs

M-Hood
02-03-2015, 01:08 PM
Here is the other shop that offers them which is here on the West Coast.
http://scch-heads.com/viewpart.php?id=36

They are the ones that do the shafts for USRT, even listed so on the USRT listing for the shaft.

Model: SCCHINTS
Shipping Weight: 3lbs
Manufactured by: SCCH

GrapeBandit
02-03-2015, 07:12 PM
USRT sells them here: http://www.usrallyteam.com/index.php?main_page=product_info&products_id=1226

Tell Scotty that Laszlo from 034 says hello! [:)]


A machine shop can do that for you or you can contact Issam - http://www.inaengineering.com/

I'd go with a machine shop first.


Edit: I was working and I forgot to post. Lol!


Here is the other shop that offers them which is here on the West Coast.
http://scch-heads.com/viewpart.php?id=36

They are the ones that do the shafts for USRT, even listed so on the USRT listing for the shaft.

Model: SCCHINTS
Shipping Weight: 3lbs
Manufactured by: SCCH

thanks for the links guys. FFE is going to machine mine for $75

gmx
02-04-2015, 06:40 AM
Pretty good price. Specs are out there. About 5.5mm taken off the gear with ie h beams iirc. Had it on my computer somewhere I'm sure, but you're in good hands

Sent from my Nexus 5 using Tapatalk

GrapeBandit
02-04-2015, 07:10 AM
Pretty good price. Specs are out there. About 5.5mm taken off the gear with ie h beams iirc. Had it on my computer somewhere I'm sure, but you're in good hands

Sent from my Nexus 5 using Tapatalk
yea, i had read some ppl did 5.5, others did 6. i may take it to the machine shop who is going to bore my block and see how much he will charge to take 6mm off and balance it for