View Full Version : Pully Kit

09-06-2005, 05:53 PM
Has anyone installed the pulley kit for the 1.8t and does it work for Tip? Also I am planning on getting the samco hosing and inlet. Are all thses worth it and will i need better injectors, it is reall embarassing to ask lots of questions i just cant relate all these parts from my jetta i have i dont know maybe its just the diffrent names and im making this harder then it should.

Mods 2.5" dp and cut out k&n upsolute custom chip spikes at 21 psi n75 ecs and forge 007

I have been getting alot of good info on this site you guys are well better than the VW site usally if you have a question you get flamed[az]

09-06-2005, 07:19 PM
get a real turbo first... if you add up all the money you've spent and are about to spend you could've had at least a k04 kit set up and running.

09-06-2005, 07:21 PM
From what I've heard, pulleys won't make a difference on our cars.

09-06-2005, 07:58 PM
OK thanks you gotta understand i bought those parts when I had the money its kinda hard to save because if I dont spend it then it goes to other none needed things like lending or to the girlfriend LOl most of the kits go 1000+. Only if you know where i could get a k04 for less

09-06-2005, 11:50 PM
pulley kits are for super charged cars because the blower is run by a (you guessed it) a pulley. So cams and pullies won't do much for our cars. NEXT!

09-07-2005, 12:28 AM
What year is your car? As you said in your other thread, you ran a 14.4 right? That's pretty nice for an A4 still on a k03.

09-07-2005, 04:31 AM

09-07-2005, 10:31 AM
pulleys loose power on a4s, the a4 loves the stock pulley. Plus its pretty light anyway.

09-07-2005, 10:41 AM
i so beg to diff on the cam statement. i just put eurospec cams in my 1.8t with k04 and after the turbo starts to fall off. it feels like it dies at 5k and then when it hits 6k it starts to pull crazy hard again. experience before u make a comment on it bc i know alot of people dont do it but cams do something all the time. especially with a boosted car.

09-07-2005, 10:41 AM
isn't there a lightweight pulley set that doesn't change the diameters just the weight?

not that I'd put them on until everything else was modded to the hilt. but still, its nice to talk about these things...

09-07-2005, 01:06 PM
yes ecstuning has them