PDA

View Full Version : No communication with the cluster



nautica tuner
11-19-2014, 12:44 PM
I replaced the bulbs in my cluster and everything lights up nicely. But the information in the center LCD is gone. It lights up but nothing is displayed. I hooked up my vagcom cable and found an error saying there's no communication with the cluster. I am certain that I didn't mess up the wiring of the LCD and I could hear a buzzer sound (like when you have a bad headlamp or your ECT is too high). What could be causing this problem? My car is a '97 european AEB with immo removed.

seanf86
11-19-2014, 01:59 PM
If you had the cluster out make sure the connectors are seated into the back of the cluster all the way

Spanky387
11-19-2014, 02:12 PM
If you had the cluster out make sure the connectors are seated into the back of the cluster all the way

What he said, Ive seen this a few times after people have sent their clusters out to get the lcd screen fixed

nautica tuner
11-19-2014, 03:13 PM
If you had the cluster out make sure the connectors are seated into the back of the cluster all the way

Ok. I'll re-install it then. Thanks. If it's a bad LCD, would it lit up still?