PDA

View Full Version : Air/oil/pressure leaking from back of the head (with picture)



vrmm
10-05-2014, 06:47 PM
I'm assuming there's supposed to be a crescent moon gasket deal in there? There is something, but it's set in half an inch or so.
When I blow air through my pcv dump it blows out of the back of the head.

Annnnd do you have a part number for that broken coolant flange adapter deal below my coolant temp sensor?? I didn't know that pin released it, so I just took the hose off.

http://i1240.photobucket.com/albums/gg500/atomicrider4/10349964_984179081599600_5823779567800509018_n_zps 08a00d9d.jpg


After bt'ing, my stock clutch made it mayyyyyyyybe 2000 miles. I was casualing driving 60 or so, stopped and a gas station, tried to take off and it died. I thought I was in 3rd, but it only got worse.
I'm planning to replace it with a ringer racing full face stage 4 cerametallic. You could add your input on that clutch if you'd like(or not since my whole thread is about something else.))

http://i1240.photobucket.com/albums/gg500/atomicrider4/1236455_981481068536068_7541762176074739126_n_zps9 223dd09.jpg

redline380
10-05-2014, 07:14 PM
yes there is a half moon seal that is suppose to go in there. that hose should be on ecs tuning