PDA

View Full Version : Anyone have a fender roller?



Ax_rings
06-18-2014, 08:26 PM
As the title states does anyone have one I could borrow/rent to pull the fenders?

Car rubs just a little so it only needs to come out a tiny bit.

Thanks!

Aok303
06-18-2014, 09:05 PM
do you know chuck who use to have the yellowish orange b5 rs4 conversion he has one

McGovs2.7TB5
06-19-2014, 07:19 AM
Bluewater rents theirs iirc

boostedAvant
06-19-2014, 08:02 AM
Use some phone books and air out, brah!

Ax_rings
06-19-2014, 09:37 AM
Ha thanks guys!

Just looked at it and its pretty bad found a scratch on a wheel oops.

I found a guy that will rent it to me for $20 bucks on CL cant beat that.

That was the plan last night but I cant find a phone book for the life of me! Even scooped out some abandon houses NADA.

AudiTFSI3o3
06-19-2014, 08:19 PM
I have an eastwood roller (only used once) that I can sell you :D

Zba
06-24-2014, 08:20 PM
I just used a baseball bat not even a week ago. Easy and cheap and worked great!

Ax_rings
06-25-2014, 06:32 AM
The Bat is too sketchy for me.

My fenders are nicely pulled now and doesn't rub.

I used this guy below. He was pretty cool and legit if anyone needs to rent one in the future.

http://denver.craigslist.org/pts/4526875387.html

AudiTFSI3o3
06-25-2014, 07:30 AM
nice! question for you, when you rolled the fenders did you place all 4 corners on jacks or just work 1 at a time?

Ax_rings
06-25-2014, 07:57 AM
I just worked one at a time, it was super easy.

Is it better to put your car up on jack stands?

AudiTFSI3o3
06-26-2014, 08:23 PM
i was just curious because of AWD

Ax_rings
06-27-2014, 06:06 AM
oh yea the wheel still moved enough for the fender roller had no issue just put it in neutral but on the rear you have to take off the e-brake so make sure your going it on a flat surface.

The only issue was it didn't clear the front brake caliper so I just skipped that spot on the fender and it came out fine.