PDA

View Full Version : For Sale: B5 A4 Track Car - Nearly Complete or Partial Part Out



Raacerx
06-15-2014, 09:02 AM
I've tried to avoid posting this for some time now, but my priorities have just shifted too much, and it's time to try to get rid of the A4 (before I've ever tracked it). I'm in the process of buying a house and I could really use the extra money for incidentals, and frankly I won't have any time in the near future to dedicate to the car anyways.

I'm open to different scenarios, be it selling the car complete with all spare parts and tires, or doing some degree of a part out. PLEASE DO NOT email me for little individual parts like door handles or the hood. If I do part out, it will be engine and drivetrain first.

The car is 90% done. It has no cage but is prepped and stripped for it. Here is the build:


1997 Audi A4 1.8T Quattro (salvage title)
06B block w/ new 2.0TFSI Forged OEM Crank, new oil pump, new everything
ARP head stud kit, main stud kit, crank bolt, cam bolt
JE FSR 82.5mm 9.0:1 pistons, custom machined for additional valve lift / VVT
Integrating Engineering Tuscan Lightweight rods
034Motorsport coated bearings throughout
AEB big port head, stock AEB cams
Supertech complete valvetrain, stock valve diameters
Stock AEB intake manifold, 30v V6 DBC 70mm throttle body
Integrated Engineering manual timing belt conversion
Moroso billet sandwich plate w/ large oil cooler core
034Motorsport power steering cooler

Precision 6262 vband .63 AR turbo
034Motorsport custom Time Attack vband tubular exhaust manifold
Tial MVR 44mm wastegate, watercooled
Mitsubishi EV010 stock front intercooler, modified for B5 use (exceptionally lightweight)
034Motorsport billet electronic boost control valve
034Motorsport billet diverter valve (used as blow off valve)
3.5" single muffler exhaust (Car Will Need a Downpipe)

034EFI Stage IIc standalone
Custom Mil-Spec engine harness w/ Raychem DR-25
034Motorsport Wideband controller
Dual Bosch 044 fuel pumps and surge tank, stock in tank pump
Stock fuel rail

Built 01E Transmission w/ RS4 3rd/4th gear
4:1 diff
240mm Steel Conversion flywheel
Stock RS4 clutch
S4 front axles
S4 driveshaft and rear diff
S4 shift linkage, shifter box, short shifter
S4 front subframe and uprights
034Motorsport Billet Subframe bushings in front
Brembo GT 355mm 4-piston front brake kit
034Motorsport 300mm S4 rear brake kit
Metal master cylinder, metal slave cylinder, -3AN braided clutch line
034Motorsport Track Density motor mounts
034Motorsport Track Density transmission mounts
034Motorsport Poly snub mount
034Motorsport Track Density diff carrier bushings

Spherical adjustable front upper control arms
Spherical adjustable rear upper control arms
Spherical adjustable front tie rod ends
Spherical adjustable rear tie rod ends
Spherical adjustable front and rear sway bar end links
Stock S4 front sway bar
Custom valved Koni struts
034Motorsport strut mounts

Status custom carbon fiber racing seat
Front and Rear strut bars (until cage)
Fiber Images vented carbon fiber hood
S4 bumpers and side skirts
Partially gutted interior (still has power windows, but locking pump, etc gone)
Work Emotion CR-Kai 18x8.5" rims
Front fenders have been slotted for additional tire clearance and engine bay venting

Car is fitted with Contentinal racing slicks, and I have over 4 sets in my garage that I can include for the right price. The Status carbon seat is going up for sale on it's own.

The engine alone ran close to $10k, shortblock and heads built by the same shop that did my 2.7T motor. Transmission ran over $2500 not including any driveline conversion pieces. There's a lot of money put into this car and not much else needed for a full on track beast.

Build Thread: http://www.audizine.com/forum/showthread.php/464836-Max-s-B5-A4-Race-Car-Build-Thread?p=9737354#post9737354

Asking Price for Everything including spare parts not listed and all tires : $20,000.

mrbacardi35
06-15-2014, 02:23 PM
Are you running s4 spindles? I am interested in the brakes.

Raacerx
06-15-2014, 05:30 PM
Are you running s4 spindles? I am interested in the brakes.

Yes, the car has S4 uprights.

2BblkAudis
06-15-2014, 06:39 PM
Max I'd be interested in the Carbon hood, let me know if you decide to let it go.

97B518TQM
06-16-2014, 10:44 AM
Max I'd be interested in the Carbon hood, let me know if you decide to let it go.

"PLEASE DO NOT email me for little individual parts like door handles or the hood". I guess even this is not clear enough.

2BblkAudis
06-16-2014, 11:24 AM
I didn't email him nor PM him. It was a comment stating I would be interested in the event he decides to part.

Thanks for the observation.