PDA

View Full Version : 18x10 et25 info



Mythbuster74
02-14-2014, 04:29 PM
So I really want to get rims this size because I'm a fan of the big lips all around look. Does anyone have pictures of this? And will it work? I'm pretty positive it will but there's no solid info on this. Pictures would really be appreciated.

bw86
02-14-2014, 05:00 PM
..

A4 Quattro
02-14-2014, 05:06 PM
Here is a thread for you. This guy is running 18x10 +25 in the rear.
http://www.audizine.com/forum/showthread.php/429598-Whoring-the-new-wheels-Picture-warning...-KT1-s

http://farm6.static.flickr.com/5207/5729275324_25e4c45ab3_b.jpg




These are also 18x10 +25

http://i849.photobucket.com/albums/ab51/thorhannah/Photoshoot%205-26-11/DSC_28301.jpg


Looks like it would work in the rear. Still looking for info on the fronts. You will either have to roll the fenders, poke 2+ degrees or just not be lowered.


EDIT again,

This is 18x11 up front. Gonna need some widebody action up here.

http://i830.photobucket.com/albums/zz228/ipop07/bbs%20wheels/IMG_1790.jpg

18x9 up front.

http://i830.photobucket.com/albums/zz228/ipop07/bbs%20wheels/IMG_1778.jpg

Mythbuster74
02-14-2014, 05:35 PM
Here is a thread for you. This guy is running 18x10 +25 in the rear.
http://www.audizine.com/forum/showthread.php/429598-Whoring-the-new-wheels-Picture-warning...-KT1-s

http://farm6.static.flickr.com/5207/5729275324_25e4c45ab3_b.jpg




These are also 18x10 +25

http://i849.photobucket.com/albums/ab51/thorhannah/Photoshoot%205-26-11/DSC_28301.jpg


Looks like it would work in the rear. Still looking for info on the fronts. You will either have to roll the fenders, poke 2+ degrees or just not be lowered.


EDIT again,

This is 18x11 up front. Gonna need some widebody action up here.

http://i830.photobucket.com/albums/zz228/ipop07/bbs%20wheels/IMG_1790.jpg

18x9 up front.

http://i830.photobucket.com/albums/zz228/ipop07/bbs%20wheels/IMG_1778.jpg

I looked through that thread today, so I know they'll fit in the back. I'm worried about the front not fitting. I'm not "slammed" as far as stanced cars go, but it's def lowered. What about pulling the fender a little? Is there a "mild" way to do this? Without the putty and all that.

Mythbuster74
02-15-2014, 02:00 PM
Researched pulling a little bit and am wondering what your guys thoughts were on the best technique. Eastwood fender roller? Or do you think the phone book way would work pretty decent.

Still would be nice to see anymore examples of the 18x10 wheel setup.

Sent from my SCH-I535 using Tapatalk