Deep Dish Wheels or Concave

[zzDuality]

Anyone have any recommendations for deep dish or deep concave wheels? I'm looking for 3-4+++ deep dish wheels to use on the audi for some car shows i think the stance looks nice with the right wheel. Anyone have any recommendations of any wheel brand that has a nice concave look or dished lips?

Please dont recommend me Vossen Wheels, they are literally like 5 minutes away from me all I ever see is Nissans stanced out in vossens, those wheels are getting repulsive @_@!

Anything good around 1.5k-2.5k price range? The wheels dont have to be new either just not dented everywhere.

[A4 Quattro]

Vossen makes nice wheels [>_<]

I'm sorry I had to..

[zzDuality]

Vossen makes nice wheels [>_<]

I'm sorry I had to..

BLARGEHEGEGEGEGGEGE!! lol

[Cgoon009]

http://www.pyspeed.com/ADV1-Wheels-s/815.htm
http://www.pyspeed.com/BBS-Wheel-LM-R-p/bbs-lmr.htm
http://www.pyspeed.com/BC-Forged-Wheels-s/957.htm
http://www.pyspeed.com/HRE-Wheel-s/564.htm

[Cgoon009]

Scroll down to see the wheels

any of the that would look good in the right color

[Liquid Smoke]

haha yea i was thinking Vossens right away, but i do agree i see them on way too many Honda Accords and similar cars like that nowadays.

but i'd def go with concave over deep dish, the style is just so much nicer. and with that budget i would look at HRE and ADV1 wheels, all nice looking and will be big and wide with nice concave.

[a2 4.0t]

rotiform makes some nice concave and deep dish wheels

theres a white b8 wagon in the photos at the bottom of the link


http://www.rotiform.com/products_blq_3pc_concave.html

[X Y Z]

1.5 to 2.5k will not buy you HREs or ADV1s unless you meant price per wheel [:)] you can, however buy a used set of cast/flow form HREs or ADV1s for said budget. Have you looked at AG wheels yet?

Those Pyspeed prices are per wheel, with the exception of the flow form sets..

[r6_11b8]

idk i dont really like dish on any audi just doesnt look right to me.....id go with the most concave you can!

[Campblett]

Look at forgestar. They have a mix of dish and concave. Their concave wheels are really nice and each one is custom made to your specs (offset, bore, etc) allowing for MAX concave.

[Okan509]

you're right deep dish doesn't look right on audis... [facepalm]

http://maxx.wolltech.com/AFive/content/bin/images/large/0396.jpg

http://maxx.wolltech.com/AFive/content/bin/images/large/0407.jpg

http://maxx.wolltech.com/AFive/content/bin/images/large/0380.jpg

[auditd0rk]

^ Not my style, but damn that looks sharp! That's some meat on the rear.

[TCHUN003]

I love concave, but that's me. To each his own. Hard to get either on this platform, doable, but difficult.

Here's a B5RS4

http://i62.photobucket.com/albums/h110/tchun003/8310320036_8433a023a6_zps0e17532f.jpg (http://s62.photobucket.com/user/tchun003/media/8310320036_8433a023a6_zps0e17532f.jpg.html)

[r6_11b8]

you're right deep dish doesn't look right on audis... [facepalm]

http://maxx.wolltech.com/AFive/content/bin/images/large/0396.jpg

http://maxx.wolltech.com/AFive/content/bin/images/large/0407.jpg

http://maxx.wolltech.com/AFive/content/bin/images/large/0380.jpg

o sorry didnt know we werent allowed to give our opinion on a public forum.....and all those honestly dont look good to me at all

my preference

http://i1128.photobucket.com/albums/m492/r6350z/8541904061_f714ca2428_b_zpse460d28b.jpg (http://s1128.photobucket.com/user/r6350z/media/8541904061_f714ca2428_b_zpse460d28b.jpg.html)


http://i1128.photobucket.com/albums/m492/r6350z/audia4sc7_zps4db0720b.jpg (http://s1128.photobucket.com/user/r6350z/media/audia4sc7_zps4db0720b.jpg.html)

http://i1128.photobucket.com/albums/m492/r6350z/tumblr_my2qslrUOz1rzx9tdo1_500_zps102212c3.jpg (http://s1128.photobucket.com/user/r6350z/media/tumblr_my2qslrUOz1rzx9tdo1_500_zps102212c3.jpg.htm l)

http://i1128.photobucket.com/albums/m492/r6350z/8590265365_4caac98133_c_zps66a43ea0.jpg (http://s1128.photobucket.com/user/r6350z/media/8590265365_4caac98133_c_zps66a43ea0.jpg.html)

[Calbee]

who in their right minds would want deep dish?

https://scontent-b-sea.xx.fbcdn.net/hphotos-frc3/t31/191564_10152984104630436_1291713613_o.jpg

pic whoring over.



back on topic,

maybe go for some INDs, those are in your price range are concave.

[treginginco]

Concave wheels look AMAZING on these vehicles.

[dennisA4]

http://maxx.wolltech.com/AFive/content/bin/images/large/0396.jpg


It it just me or does this shot make the car look extra sick because the wheels look white!? [drool]

[zzDuality]

http://www.pyspeed.com/ADV1-Wheels-s/815.htm
http://www.pyspeed.com/BBS-Wheel-LM-R-p/bbs-lmr.htm
http://www.pyspeed.com/BC-Forged-Wheels-s/957.htm
http://www.pyspeed.com/HRE-Wheel-s/564.htm

Thanks for all the info guys

[zzDuality]

who in their right minds would want deep dish?

https://scontent-b-sea.xx.fbcdn.net/hphotos-frc3/t31/191564_10152984104630436_1291713613_o.jpg

pic whoring over.



back on topic,

maybe go for some INDs, those are in your price range are concave.

I guess the reason why i want some deep dish is because you dont see it on audis as much just want something different, was at a german meet tonight and literally 80% of the cars had either Vossen, TSW, or some fake bbs

[Devilz173]

http://www.audizine.com/forum/showthread.php/577362-Official-B8A4-Stance-Fitment-Thread


You are welcome

[TCHUN003]

Oh you want to be different when it comes to wheels? Check out this thread:

http://www.audizine.com/forum/showthread.php/348768-For-Those-Who-Like-To-Be-Different-When-It-Comes-To-Wheels?highlight=ftwltbdwictw

[smetch]

Watercooledind, rotiform, AG, HRE, 3sdm

[TCHUN003]

OP said 1.5-2.5k....everything u listed is out of his price range unless he gets cast Rotiforms

[blackandgray]

CONCAVE!

http://www.audizine.com/gallery/data/500/IMG_0456_640x427_.jpg

[T-Dubbs]

Those ^ look pretty flat faced....

[AudiKerl]

Those ^ look pretty flat faced....

Agreed. I think this is considered Concave. (Pic from Calbee Midnight blue VB3's Thread)

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/599528_883503560783_1914337231_n.jpg

[TCHUN003]

Baby Concave....hard to work with the B8 without stretching the tires

http://i62.photobucket.com/albums/h110/tchun003/CYMERA_20140124_122727_zpse55ll6ch.jpg (http://s62.photobucket.com/user/tchun003/media/CYMERA_20140124_122727_zpse55ll6ch.jpg.html)
http://i62.photobucket.com/albums/h110/tchun003/CYMERA_20140124_122830_zpschuoenjx.jpg (http://s62.photobucket.com/user/tchun003/media/CYMERA_20140124_122830_zpschuoenjx.jpg.html)
http://i62.photobucket.com/albums/h110/tchun003/CYMERA_20140124_124624_zps6tzecvqv.jpg (http://s62.photobucket.com/user/tchun003/media/CYMERA_20140124_124624_zps6tzecvqv.jpg.html)

[zzDuality]

CONCAVE!

http://www.audizine.com/gallery/data/500/IMG_0456_640x427_.jpg

Not going to lie, i was going to buy your wheels until i realized my audi is having some problems -.- now i got to take it to novitech to reflash my ecu

[zzDuality]

Agreed. I think this is considered Concave. (Pic from Calbee Midnight blue VB3's Thread)

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/599528_883503560783_1914337231_n.jpg

This is what i was looking for

and @TCHEN003

I never seen oem wheels that are that concaved o_O except my own rs6 wheels

[zzDuality]

Oh you want to be different when it comes to wheels? Check out this thread:

http://www.audizine.com/forum/showthread.php/348768-For-Those-Who-Like-To-Be-Different-When-It-Comes-To-Wheels?highlight=ftwltbdwictw

Awesome Lol!!

[kwbdc]

you're right deep dish doesn't look right on audis... [facepalm]

http://maxx.wolltech.com/AFive/content/bin/images/large/0396.jpg

http://maxx.wolltech.com/AFive/content/bin/images/large/0407.jpg

http://maxx.wolltech.com/AFive/content/bin/images/large/0380.jpg

Your car looks sick! [drool]

[unit]

concave for sure, i wouldn't want a damn pizza for rims :/ lol

[Okan509]

Your car looks sick! [drool]

It's Mxrz's car. and I love it. lol. most prove blanket statements wrong

[Calbee]

Front lip so weak doe. For an a5


Sent from my iPhone using Tapatalk

[VMRWheels]

who in their right minds would want deep dish?

https://scontent-b-sea.xx.fbcdn.net/hphotos-frc3/t31/191564_10152984104630436_1291713613_o.jpg

pic whoring over.

back on topic,

maybe go for some INDs, those are in your price range are concave.
Cris, you need more pics of your car on those Meisters. I've seen that photo floating around the internet for a while now. [:D]

Agreed. I think this is considered Concave. (Pic from Calbee Midnight blue VB3's Thread)

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/599528_883503560783_1914337231_n.jpg
[up]

Not the most recommended setup, but this wheel looks awesome on his car.

[Okan509]

Front lip so weak doe. For an a5


Sent from my iPhone using Tapatalk

yeah you're totally right. looks stupid and it's even dumber to run a BBK, or any performance mod for that matter. All cars should be stupid low, and perform equally bad doing so.

[SleeperCar]

Your car looks sick! [drool]

http://maxx.wolltech.com/AFive/content/bin/images/large/0380.jpg

100000000% disagree, i think staggered setups with that deep dish Porsche racing style is weak sauce, and looks trashy for the sleak lines of an audi.....but to each his own...

[SleeperCar]

go ahead and check this out...people can flame me for not being low enough but i enjoy the concave for just a 9.5 width....
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/t1/1470071_977728098350_1507097389_n.jpg

http://farm4.staticflickr.com/3771/12019985866_b3fd52f30c_b.jpg

[Mops@Nemesis]

O_o

[SleeperCar]

O_o

no love? [=(]

[Mops@Nemesis]

no love? [=(]

For what?

I'm shocked someone would call the white A5 wheel setup trashy… Or weak...

[SleeperCar]

well i think deep dish degrades the audi image...

http://prolifik1.files.wordpress.com/2012/02/39-pack.jpg

[Not A Good Idea]

Sorry dude but your wheels are hideous, generic and trashy and straight out of the bargain bin. I guess everyone is entitled to their opinion.

[SleeperCar]

1500 for wheels is bargain bin? damn dude, didnt know you rocked HREs

[Not A Good Idea]

Yup several sets of hres as well as bcforged and other forged wheels. Even my cast vossens were better looking then those.

[SleeperCar]

Well everyone has different price points...go curb that 1800 wheel [:D]

[SleeperCar]

and back to OP (sorry for getting off topic) at your price point of 1.5-2.5k....have fun choosing but just wanted to give you my 2 cents.

[Not A Good Idea]

Ill curb my wheel if you crush your car
[;)]

[SleeperCar]

hahaha!

[Calbee]

yeah you're totally right. looks stupid and it's even dumber to run a BBK, or any performance mod for that matter. All cars should be stupid low, and perform equally bad doing so.

http://www.speedhunters.com/wp-content/uploads/2013/11/Bagriders-E92-BMW-04N-680x452.jpg

stupid low, and perform equally bad doing so [drive]

[CDN_S4]

The best looking wheels IMO are those with a concave face and still have a lip like these for example:

http://i353.photobucket.com/albums/r375/NSmkVGLI/DeepConcaveADV1.jpg (http://s353.photobucket.com/user/NSmkVGLI/media/DeepConcaveADV1.jpg.html)

The best of both worlds :)

[Cgoon009]

Baby Concave....hard to work with the B8 without stretching the tires

http://i62.photobucket.com/albums/h110/tchun003/CYMERA_20140124_122727_zpse55ll6ch.jpg (http://s62.photobucket.com/user/tchun003/media/CYMERA_20140124_122727_zpse55ll6ch.jpg.html)


http://1-media-cdn.foolz.us/ffuuka/board/vp/image/1375/92/1375928691761.jpg


For what?

I'm shocked someone would call the white A5 wheel setup trashy… Or weak...

I am not a fan of deep deep dish, but yes, how? It looks fantastic! Its not me, but dayummmm. To each his own i guess. Mxrz's car looks good, and all though it may not be my style, he has matched the colors correctly and focused the attention where he wants it. On his motherfakin wheels.


The best looking wheels IMO are those with a concave face and still have a lip like these for example:

http://i353.photobucket.com/albums/r375/NSmkVGLI/DeepConcaveADV1.jpg (http://s353.photobucket.com/user/NSmkVGLI/media/DeepConcaveADV1.jpg.html)

The best of both worlds :)

^THIS + plus a white avant = [evilsmile]

[blackandgray]

Not going to lie, i was going to buy your wheels until i realized my audi is having some problems -.- now i got to take it to novitech to reflash my ecu

no worries. Lmk when you're ready and if you change your mind. Maybe when we can workout a deal.

[JOS4AUDI]

Sorry dude but your wheels are hideous, generic and trashy and straight out of the bargain bin. I guess everyone is entitled to their opinion.

I agree. Plus Hulk had the best looking wheels hands down ive seen on any A/S/RS5. Audi can pull of lips just fine ,step lip is the best. Flat lip IMO is awful, i dont care who owns it. Concave is ok ive been running a series of them lately to get some wheels out there. Going back to step lip for sure.

[Mops@Nemesis]

^I gotta man up and try a step lip next. I may need you to hold my hand:) This thread is dumb.


Mops on the move

[deceptacon]

I agree. Plus Hulk had the best looking wheels hands down ive seen on any A/S/RS5. Audi can pull of lips just fine ,step lip is the best. Flat lip IMO is awful, i dont care who owns it. Concave is ok ive been running a series of them lately to get some wheels out there. Going back to step lip for sure.
I agree with this. Concave is the in thing right now. I prefer something with a lip. But it has to be a step lip.

[zzDuality]

Has anyone considered Mercedes Wheels? i have seen some of their designs they make, pretty impressive

[zzDuality]

you're right deep dish doesn't look right on audis... [facepalm]

http://maxx.wolltech.com/AFive/content/bin/images/large/0396.jpg

http://maxx.wolltech.com/AFive/content/bin/images/large/0407.jpg

http://maxx.wolltech.com/AFive/content/bin/images/large/0380.jpg

This is what i would like to achieve !! what are those wheels called??

Found these look like reps
http://www.wheelplususa.com/images/wheel_image/thumb/1333504466/Rohana_RC10_MB_FU.jpg

[kwbdc]

http://maxx.wolltech.com/AFive/content/bin/images/large/0380.jpg

100000000% disagree, i think staggered setups with that deep dish Porsche racing style is weak sauce, and looks trashy for the sleak lines of an audi.....but to each his own...

I think everyone is entitled to their own opinion and not really in the spirit of this forum to trash something you don't like. If you don't care for it or someone else's opinion...move on. There are a lot of cars here with wheels/mods that I may not like but that's what makes it great, each person can make their cars their own with their tastes and individuality.

[Operator]

Both of the summer wheels I went with were concave. I just really like the look!!!

[SleeperCar]

Both of the summer wheels I went with were concave. I just really like the look!!!

I agree!!! Concave is the way to go!!! Leave dishes for directTV ;)


Sent from my iPhone using Tapatalk - now Free

[Mops@Nemesis]

#Rohaninaninnooonooo's !!!

[Ms.S4]

I love both dished and concave. Depends on the car and wheel IMO.

[JOS4AUDI]

^I gotta man up and try a step lip next. I may need you to hold my hand:) This thread is dumb.


Mops on the move

Awful thread lol. I love your wheels you also have very good taste. I would also love to see a step lip on your A5. come on do it!!!!!

[Mops@Nemesis]

Awful thread lol. I love your wheels you also have very good taste. I would also love to see a step lip on your A5. come on do it!!!!!

Thank ya babes. When I get tired of the ones I mounted 2 hours ago, we'll talk.


Mops on the move

[Calbee]

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/t31/665255_10152304852955436_2075899213_o.jpg

conformed! got new wheels. dish sucks, concave is best because audizine said so!

[SleeperCar]

I love the sarcasm^


Sent from my iPhone using Tapatalk - now Free

[WAF]

Calbee what rims are those VMR? What specs are they? Love the look.....

[Mops@Nemesis]

My latest setup...

http://farm6.staticflickr.com/5511/12143511753_215f46d81e_b.jpg (http://www.flickr.com/photos/91999203@N06/12143511753/)
IMG_1961 (http://www.flickr.com/photos/91999203@N06/12143511753/) by Audiyos (http://www.flickr.com/people/91999203@N06/), on Flickr

[Ajp428]

My latest setup...

http://farm6.staticflickr.com/5511/12143511753_215f46d81e_b.jpg (http://www.flickr.com/photos/91999203@N06/12143511753/)
IMG_1961 (http://www.flickr.com/photos/91999203@N06/12143511753/) by Audiyos (http://www.flickr.com/people/91999203@N06/), on Flickr

what are those specs?

[Calbee]

Calbee what rims are those VMR? What specs are they? Love the look.....

VMR v703 i think they are called (VB3). 19x10+38


My latest setup...

http://farm6.staticflickr.com/5511/12143511753_215f46d81e_b.jpg (http://www.flickr.com/photos/91999203@N06/12143511753/)
IMG_1961 (http://www.flickr.com/photos/91999203@N06/12143511753/) by Audiyos (http://www.flickr.com/people/91999203@N06/), on Flickr


Very, very nice. no sarcasm lol. are those adam's rotors?

[Mops@Nemesis]

what are those specs?

20x10.5 et30 with 3/7mm.


Very, very nice. no sarcasm lol. are those adam's rotors?

Thanks <3 LOL. Brembo GT 380mm BBK drilled kit.

[Campblett]

Wow Mops those are beautiful, loving your setup

[SleeperCar]

My latest setup...

http://farm6.staticflickr.com/5511/12143511753_215f46d81e_b.jpg (http://www.flickr.com/photos/91999203@N06/12143511753/)
IMG_1961 (http://www.flickr.com/photos/91999203@N06/12143511753/) by Audiyos (http://www.flickr.com/people/91999203@N06/), on Flickr

That looks awesome mops!!!


Sent from my iPhone using Tapatalk - now Free

[X Y Z]

Mops for the win!

[Ms.S4]

No words. It looks amazing.

[JOS4AUDI]

VMR v703 i think they are called (VB3). 19x10+38




Very, very nice. no sarcasm lol. are those adam's rotors?
hahahahhahahahahahhahahahahah

[JOS4AUDI]

My latest setup...

http://farm6.staticflickr.com/5511/12143511753_215f46d81e_b.jpg (http://www.flickr.com/photos/91999203@N06/12143511753/)
IMG_1961 (http://www.flickr.com/photos/91999203@N06/12143511753/) by Audiyos (http://www.flickr.com/people/91999203@N06/), on Flickr

beautiful mops!!! you should really consider adams rotors much better than your set up[;)]

[Calbee]

beautiful mops!!! you should really consider adams rotors much better than your set up[;)]

lol i know you guys dont believe me but i honestly did not even see those brembos calipers.. saw it on my phone lol

[JOS4AUDI]

lol i know you guys dont believe me but i honestly did not even see those brembos calipers.. saw it on my phone lol

LOL I thought you were referring to the thread 2 days ago lol. Nice tallking to you though on AZ i usually only keep up with you on IG

[Campblett]

Mops has officially taken over this thread


lol i know you guys dont believe me but i honestly did not even see those brembos calipers.. saw it on my phone lol

How could you miss those, they're massive!

[Calbee]

LOL I thought you were referring to the thread 2 days ago lol. Nice tallking to you though on AZ i usually only keep up with you on IG


honestly i am super lost whats going on here. i am a dick on az but didnt mean to offend you or mops, if i did sorry! i actually truly like his new setup, no sarcasm intended. and i really did NOT see those calipers when i was on my phone lol, my bad

[Mops@Nemesis]

honestly i am super lost whats going on here. i am a dick on az but didnt mean to offend you or mops, if i did sorry! i actually truly like his new setup, no sarcasm intended. and i really did NOT see those calipers when i was on my phone lol, my bad

I'm not offended. Not sure why I would be. Takes much more than a stranger on the internet to hurt my feewlins [:p]

I kinda though you were serious about the rotors. Hence why I actually listed the specs. Just for you

http://img.tapatalk.com/d/14/01/26/uraru6a9.jpg

Thanks for the compliments, guys [up]


Mops on the move

[zzDuality]

My latest setup...

http://farm6.staticflickr.com/5511/12143511753_215f46d81e_b.jpg (http://www.flickr.com/photos/91999203@N06/12143511753/)
IMG_1961 (http://www.flickr.com/photos/91999203@N06/12143511753/) by Audiyos (http://www.flickr.com/people/91999203@N06/), on Flickr

Props on the 19x10 thats what Im getting next

[zzDuality]

I'm not offended. Not sure why I would be. Takes much more than a stranger on the internet to hurt my feewlins [:p]

I kinda though you were serious about the rotors. Hence why I actually listed the specs. Just for you

http://img.tapatalk.com/d/14/01/26/uraru6a9.jpg

Thanks for the compliments, guys [up]


Mops on the move

Are spacers safe tho?? Its technically a piece of steel between your wheels wouldnt that come off if you drive hard??

[JOS4AUDI]

honestly i am super lost whats going on here. i am a dick on az but didnt mean to offend you or mops, if i did sorry! i actually truly like his new setup, no sarcasm intended. and i really did NOT see those calipers when i was on my phone lol, my bad

Calbee i was joking no offense taken. I thought you were too. No way dude your one of my favorites on AZ. i guess i assumed we were talking about the same thing lol

[a2 4.0t]

Are spacers safe tho?? Its technically a piece of steel between your wheels wouldnt that come off if you drive hard??

spacers won't come off, they have holes in them for the bolts.http://www.z1motorsports.com/350_g35/images/Z1HubCentricSpacersLineup.jpg

[Mops@Nemesis]

Props on the 19x10 thats what Im getting next

These are 20x10.5.

Spacers are 100% safe if installed properly. The essential become an extension of the hub. I beat the hell outta my car, and I've never had an issue. Ive run 3, 4, 5, 7, 10, 15, 20 and 25mm spacers.

[Ajp428]

These are 20x10.5.

Spacers are 100% safe if installed properly. The essential become an extension of the hub. I beat the hell outta my car, and I've never had an issue. Ive run 3, 4, 5, 7, 10, 15, 20 and 25mm spacers.

none the less your car looks incredible

[A4 Centaur]

Looking good!

[SleeperCar]

so OP...what have you decided on? i feel like this thread went no where LOL

[Campblett]

This thread has accomplished 2 things:

1. Mops' car is beautiful

2. If you don't like deep dish wheels you're a hater and will get ripped apart

[Ajp428]

This thread has accomplished 2 things:

1. Mops' car is beautiful

2. If you don't like deep dish wheels you're a hater and will get ripped apart

hahah so true I'm a fan of concave but on certain set up deep dish looks awesome too

[Okan509]

respect for properly done shit is what's important to take away from this thread. hating on shit that is still awesome, or being on some sort of fucking high horse for no damn reason is absurd.

[Mops@Nemesis]

respect for properly done shit is what's important to take away from this thread. hating on shit that is still awesome, or being on some sort of fucking high horse for no damn reason is absurd.

For real. To say a certain style wheel is shit, is dumb. And because someone does not care for a style wheel on a certain car, does not mean it doesn't look good. Yea, some cars/setups look better with some over others. Whether it be dish, concave or flat, or $250 a wheel or $2,000 a wheel. They are have their place, and can all look good.

Thanks for the compliments once again. Pics from today if interested…

http://www.audizine.com/forum/showthread.php/578363-Nemesis-Autosport-A5-on-BC-Forged-HB29-20x10-5-Part-II/page2

[Beast]

Deep Dish!

my fav wheels, have both deep dish and concave. DPe sc5
http://img.tapatalk.com/c6e4c99f-73e4-59b6.jpg

[SleeperCar]

Still no response from OP, want to hear what he has decided on.

I love threads that ask for opinions, then people get mad at your opinion, makes me smile :)


Sent from my iPhone using Tapatalk - now Free

[Mops@Nemesis]

I hate threads that ask for opinions, and people think they can be rude, call other members setups/wheels ugly and trashy, and then become surprised when others call their "opinion" out as being rude and ignorant.

[dennisA4]

Who makes wheels with polished lip and painted spokes? At somewhat affordable prices. ;)

Something like this..
http://i326.photobucket.com/albums/k437/pattrick02/_DSC0910-1.jpg

[Mops@Nemesis]

BC does most every wheel they offered with a polished/brushed lip and painted face. You can also get reps of such BBS for pretty cheap.

[SleeperCar]

I hate threads that ask for opinions, and people think they can be rude, call other members setups/wheels ugly and trashy, and then become surprised when others call their "opinion" out as being rude and ignorant.

lol i see what you are doing...and i appreciate the effort. But my opinion is simple, i think the dish look ruins the clean audi lines.....without all the rude comments. I apologize if i offended a member with my words.

[Mops@Nemesis]

lol i see what you are doing...and i appreciate the effort. But my opinion is simple, i think the dish look ruins the clean audi lines.....without all the rude comments. I apologize if i offended a member with my words.

:P I can respect that. Always good to try and keep it clean.

[SleeperCar]

:P I can respect that. Always good to try and keep it clean.

all good brother! your BC racing wheels are spot on though, i would rock those anyday [drive]

[dennisA4]

BC does most every wheel they offered with a polished/brushed lip and painted face. You can also get reps of such BBS for pretty cheap.

Thanks, those BC wheels are pretty sick, although a little expensive for what I was looking to spend.
My car is glacier white so I'd really like to find a gloss white painted face.

[PhxPhil]

What are those wheels?? I WANT!