Meth nozzles sizing

[bengone1]

I am mix and matching meth components and was curious on nozzle sizing/ratings so I called both Devil's Own and Snow Performance. Snow specs their nozzles flow at 60psi and Devil's Own specs at 100psi. Snow rep said to expect 150% rated flow at 100psi. Snow also recommends 5-7 total GPH.

http://i402.photobucket.com/albums/pp101/BenOU812/NozzleFlow_zps98ae0ce6.jpg (http://s402.photobucket.com/user/BenOU812/media/NozzleFlow_zps98ae0ce6.jpg.html)

[andyrew]

Thanks for the breakdown!

[4ringAR]

i run dual d03 nozzles, so 6gph total, assuming the pump and lines are able to supply enough flow for that

[bengone1]

i run dual d03 nozzles, so 6gph total, assuming the pump and lines are able to supply enough flow for that

Sounds right in line with Snow's recommendation. What psi and turbos? If you get a chance D.O. has a calculator on their homepage as well.

[4ringAR]

Tune is for 21psi on the f21s, but I've been running these nozzles since the car was k03 (chipped)

[bengone1]

Good to hear. I was wondering if a higher flowing turbo would be towards the 7gph mark and a k03 closer to 5gph. Did you experiment with sizing at all?