PDA

View Full Version : 96 2.8 12v no heat



SLAB97A4
01-08-2014, 10:45 AM
The heat is not working in my 96 2.8 12v 5speed. Brand new thermostat (tested before it was put in) water pump with 6,00iles on it, brand new timing belt, new head gaskets, official g13 from the dealer.


I pulled these codes from the hvac controls
3.1 - interior temperature sensor, in instrument panel static open
5.3 - outside air (ambient) temperature sensor, front, sporadic open
6.2 - engine coolant temperature (ECT), a/c static short: see 6.1 - engine coolant temperature (ECT), a/c static open
7.1 - ambient temperature sensor at fresh air blower, static open
15.7 - air flow flap, sporadic block
18.3 - fresh air blower voltage, sporadic
22.1 - a/c refrigerant high pressure switch, static open see 22.3 - a/c refrigerant high pressure switch, sporadic open
49.1 - ???
50.3 - ???


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

SLAB97A4
01-08-2014, 10:46 AM
Any help would be appreciated


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)