Revo stage 2?

[Dregalia91]

Wanting to go stage 2 but want to know the precautions I should do. Car is finally running mint so I feel as if it's time, 06 a4 2.0t tiptronic. What should I do to the car before I go stage 2?

Have already done...

PVC
Coil packs
Stasis exhaust
Tranny fluid changed



So what else?

[aluthman]

Test pipe or HFC

[p0isin]

^^^^^ that. If you don't have a catch can I'd look into one, you can run it back to the turbo like the stock pcv or run a vta setup.

There's no other required hardware for stage 2. If you want you can look into upgraded smic or a fmic.

[ChipsöfSix]

From Revo


Stage2 for 2.0T FSI Longitudinal vehicles
Required: Turbo back exhaust with Decat or highflow catalytic convertor (2.5″-3.0″ recommended)
Recommended: Cold Air intake (from turbo inlet pipe to front of car replacing factory airbox for best gains)
Front-mounted Intercooler (Required if customer wants to use the full boost potential)


HPFP upgrade also for sure! and cam follower.

Catch can

[LoKisSpYdR]

From Revo


HPFP upgrade also for sure! and cam follower.

Catch can

That would take you to 2+ but it's something to add to the to-do list.

[ChipsöfSix]

That would take you to 2+ but it's something to add to the to-do list.

I guess but with Revo stage 2 file fuel is set to 9 so it wouldn't hurt. and if he has a SPS+ you can change that if he wants with no issues.

[LoKisSpYdR]

I guess but with Revo stage 2 file fuel is set to 9 so it wouldn't hurt. and if he has a SPS+ you can change that if he wants with no issues.

Each stage is completely different. While you can adjust settings with the SPS, the base file will be different and it will not be the same.

[jimrobbington]

Dv+ or at least check your dv. Then, just getb stage 2. Anthony else will only enhance stage 2 but isn't necessary

Sent from my SGH-M919 using Tapatalk

[Dregalia91]

Thanks that's the answer I wanted to hear. Thanks az!