HELP! Need an Audi Tech to look at this code

[IanCH]

Long story short, my dealer is blaming my VAG com mods for an electrical fault in my central electric (09) unit, which is not possible. I need to prove that it is not my coding and it fact faulty hardware that caused this.

here's the relevant codes from the module. Note how the coding is gone and they are saying I did that, but see at the bottom of the printout it says electrical fault in circuit.

Address 09: Cent. Elect. (J519) Labels: 8K0-907-063.clb
Part No: 8K0 907 063
Component: BCM1 1.0
Coding: 00000000000000000000000000000000000000000000000000 0000
Shop #: WSC 00000 000 00000
VCID: ECDD5A690F90569

Subsystem 1 - Part No SW: 8K1 955 119 A HW: 8T1 955 119 Labels: 1KX-955-119.CLB
Component: WWS 071010 H06 0070
Coding: 00F511

Subsystem 2 - Part No SW: 8K0 941 531 AL HW: 8K0 941 531 AL
Component: E1 - LDS H08 0090

5 Faults Found:
02095 - Component Protection Active
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 1
Fault Frequency: 1
Mileage: 1048574 km
Time Indication: 0

00003 - Control Module
014 - Defective
Freeze Frame:
Fault Status: 01101110
Fault Priority: 1
Fault Frequency: 1
Mileage: 1048574 km
Time Indication: 0

01042 - Control Module; Not Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 1
Fault Frequency: 1
Mileage: 1048574 km
Time Indication: 0

03175 - Invalid Data Set
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 1
Fault Frequency: 1
Mileage: 1048574 km
Time Indication: 0

03021 - Local databus 3
012 - Electrical Fault in Circuit
Freeze Frame:
Fault Status: 01101100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 156
Mileage: 122766 km
Time Indication: 0
Date: 2013.12.03
Time: 08:56:00


Just need to talk to an audi tech or get in touch with someone who is NOT IRA audi in order to get a second opinion.