PDA

View Full Version : Foglight recommendations needed, 55w, to fit RS4 bumber.



A1 A2 German
08-12-2013, 11:29 AM
I hate the fact my car never came with/never had a lot of the oem parts, so I can't just go out and take a look even though I have the car. I got it with no fog lights, no mesh, no inserts, nothing.

I'm looking for foglights to fit into the corners of an Reiger RS4 bumper, I most likely will not be able to use the oem style plastic insert grills due to the fmic piping however not worried about those, so it will have to be those stubby housings/grills. I'm also looking to use a 55w bulb running on a DDM kit.


-I have the Rs4 bumper (abousiltey bare)

-I have nothing else, including what ever bracketry is need to mount it to the Rs4 bumper.

What do I need to look at to get an oem fit into the corners of the Rs4 bumper and what foglights do I need to look at to run a 55w bulb? I will not use anything less then the 55w as I'm not going to have multiple colors projected from my car as I want them to match my depos.

A1 A2 German
10-16-2013, 11:13 PM
Bump

A1 A2 German
10-23-2013, 02:32 PM
Bump

nynoah
10-23-2013, 04:45 PM
Its aftermarket... you need to build something to fit.

A1 A2 German
10-23-2013, 07:50 PM
Alright, what do I even buy....I have nothing. OEM fogs except and handle 55w bulbs? What kinda buckets or brackets are used to start modifying from?

Gumby
10-23-2013, 07:52 PM
Do you have the crash bar that goes with the bumper? There's fog light brackets attached to it from the factory.

A1 A2 German
10-24-2013, 12:51 AM
If what people refer to as the rebar, yes it's been bonded to the RS4 bumper. Alright, I guess using aluminum stock to mount anywhere to secure them is super easy.

However about fogs that can handle 55w bulbs?

nynoah
10-24-2013, 08:03 AM
However about fogs that can handle 55w bulbs?

You are not shopping for specialized expensive stuff. PIA level.