Audi A4 B7 non Bose system upgrade

[pule333]

Decided to upgrade my factory system after discovering it was a none Bose system...
http://img.tapatalk.com/d/13/07/01/5azahena.jpgnew vs old
http://img.tapatalk.com/d/13/07/01/qyseha6y.jpg
http://img.tapatalk.com/d/13/07/01/pe7avypu.jpg18mm ply
http://img.tapatalk.com/d/13/07/01/y5ehy8yq.jpg 2x 18mm rings + 9mm backing
http://img.tapatalk.com/d/13/07/01/3u9a7y9y.jpg
http://img.tapatalk.com/d/13/07/01/a4y9apyh.jpg some industrial strength wood glue and screws
http://img.tapatalk.com/d/13/07/01/2uve7ahy.jpg
http://img.tapatalk.com/d/13/07/01/dy2a7eqa.jpg acoustic cloths
http://img.tapatalk.com/d/13/07/01/ujyqy3e8.jpg
http://img.tapatalk.com/d/13/07/02/a9ebasaj.jpg modified front grill to make backing
http://img.tapatalk.com/d/13/07/02/anybupyr.jpg
http://img.tapatalk.com/d/13/07/02/emytadas.jpg
After a bit of trimming new twitters fit perfectly
http://img.tapatalk.com/d/13/07/02/e7uty7ym.jpg
New crossovers fit well in to the door card
http://img.tapatalk.com/d/13/07/02/5ugaheda.jpg
Don't make the same mistake! RCA cable ALWAYS run on opposite side of the car from your power line (4awg to power both amps with distribution box to split in to 8awg)
http://img.tapatalk.com/d/13/07/02/sysevy9u.jpg
You can never have too much sound proofing
http://img.tapatalk.com/d/13/07/02/7ema2aby.jpg
1600w 4 Chanel http://img.tapatalk.com/d/13/07/02/esavu6up.jpg
Relocated my mono amp for Sub
http://img.tapatalk.com/d/13/07/02/8e7e6uqu.jpg
I am very happy how it turned out! I am still adjusting the settings! But at low volumes it sounds same as stock. At higher levels you can feel your heart skipping the beat ;)

[naiku]

Nice, did you have any issues getting the door cards back on? those speakers look really deep.

[pule333]

Nice, did you have any issues getting the door cards back on? those speakers look really deep.

Nope none whatsoever. I used 18x18x9mm ply total of 45mm and there is still half an inch to spare