View Full Version : Need a hand on some part #'s

Turbo Nerd
06-16-2013, 10:49 PM
Trying to finish this thing and realized I'm missing some stuff. Parts are for a 2001..

I need the fuel injector harness clips (no idea why they are out of the plug but they are).

I need the retaining clip that holds the coolant pipe to the flange on the driver side below the intake manifold shown here



I need to find a bolt to block the stock coolant port that feeds the turbo since my turbo is only oil cooled.

On a good note I got the harness in, downpipe routed (just waiting on a Vband clamp), track density tranny mounts are in, starter in, everything is looking good. After I get all this situated I'm going to tow it to the shop and route the fuel lines from the walbro 255 intank to the dual 044's in 034's surge tank.

TIA fellas.

06-17-2013, 01:43 AM
I would just loop the 2 coolant ports together. Just what I would have done. As for the injector clips, I can give you mine from my old harness. Text me your shipping info (if you still have my number). Can't find the P for the retaining clip.

06-17-2013, 04:05 AM
Retaining Spring