PDA

View Full Version : new suspension and upper control arm bushing still problem...:(



slolatino
06-13-2013, 07:20 AM
hello guys! so i just got a new suspension done...koni coilovers and my two front upper control arm bushings replaced

however whenever i make a complete right or left turn...with the steering where almost all the way around....i guess u turn...u hear like a loud pop or clunk D:

say i do a sharp right turn the noise comes from left front wheel and when i do sharp left turn the noise comes from the right front wheel o:

what can this be? i bought this car 2 years ago...only mod was tein coilovers but the previous owner had it done incorrectly not torqued and so i had to replace mine ;( and even with the previous set of coilovers still had this isssue....

what else can it be? can it be the lower control arms? i havent replaced those o:

rongeur
06-13-2013, 08:17 AM
Front sway bar is not torqued / is loose.

With suspension loaded, loosen the lower bolt (goes to sway bar), place Blue lock tight and re-torque to spec.

fly300kts
06-13-2013, 08:26 AM
Pop your upper control arms and check for any marks like this picture.
Had the same issue with the shitty Sterns adjustable and they were contacting at full deflection
Since I install the 034 adjustable, all problems gone

http://i31.photobucket.com/albums/c395/fly300kts/null_zps01fe03ba.jpg (http://s31.photobucket.com/user/fly300kts/media/null_zps01fe03ba.jpg.html)

http://i31.photobucket.com/albums/c395/fly300kts/null_zpsf486b13d.jpg (http://s31.photobucket.com/user/fly300kts/media/null_zpsf486b13d.jpg.html)

http://i31.photobucket.com/albums/c395/fly300kts/null_zps6fc20c6b.jpg (http://s31.photobucket.com/user/fly300kts/media/null_zps6fc20c6b.jpg.html)

Phil

slolatino
06-13-2013, 10:53 AM
thanks for the replies and help guys appreciate it :)

i will torque front sway bar and check if upper control arms are hitting liek that o:

if not... i was told the lower control arms? i havent touched those...i'm an 2005.5 so it's time? o: