PDA

View Full Version : New Arrival! Proper HID kit for H7 halogen headlamps with Philips D2R bulbs.



mike@hidconcept
05-31-2013, 12:36 PM
Greetings to B7 and B8 owners with halogen headlamps.

As many of you would agree, the best and the proper way to add HID light, is to go with OEM xenon projector headlamps.
This would be the best choice and we absolutely agree 100%!

However, the cost involved for this route, may be too much.
Therefore, we came up with an alternative option that would be better than using an ordinary aftermarket HID kit.

As you may already know, installing an aftermarket H7 kit on reflector housing, is the least ideal choice because it not only blinds others, it also gives incorrect lighting output, pattern, and scarttered lights.
This is because the bulb used on an aftermarket kit is bare D2S capsule without coated shield that is supposed to be on D2R that reflector headlamp must use.

We came up with a bundle kit including Blesk ballasts and Philips 4300K D2R H7 Rebased bulbs with coated shield (bulb capsule is 85126).
As you may know, Philips 4300K D2R is the OEM bulb used on reflector xenon headlamps from factory and Philips bulbs are known for quality.
Although the color may not be fancy blue, it is OEM white with the most lighting output (from 35W range) compared to other kelvin rated bulbs.

Installation would be a simple plug and play and with built-in error canceller on Blesk ballasts, you will not see error message on dash.
Here's a link to a thread posted by one of AZ members who installed this setup on his B8 A4.

http://www.audizine.com/forum/showthread.php/511158-Blesk-Phillips-4300k-D2R-installed-in-Halogen-housings?highlight=hidconcept.com

Please see the photos of the kit or you can click here to go to the product page. (http://hid-concept.com/index.php?l=product_detail&p=115)
http://hid-concept.com/images/products/large_115_BK-PHKH7R-1.jpg

http://hid-concept.com/images/products/large_115_BK-PHKH7R-3.jpg

http://hid-concept.com/images/products/large_115_BK-PHKH7R-8.jpg

The price is $260 but you can use our promotional coupon code that is valid until June 2, 2013.
MDSALE15 to get 15% off.

If you have any questions, please contact us at 1-888-579-5917 during our business hours of 9 A.M. - 5 P.M. EST or email us at [email protected].

Thank You,

Mike

yeoj112689
05-10-2014, 04:51 AM
Has anyone ever bought these?

DonnieDark0
05-11-2014, 02:37 PM
Has anyone ever bought these?

X2

Operator
05-11-2014, 02:44 PM
I looked at the other thread, it'd still be good to get better cutoff pics.