NorCal RS4 drivers.. need your help

[Kookie]

I need a set of OEM RS4 wheels to TEST fit on my avant with 255 width tires. I normally have a set, but the car they're on is out of the state for the season.

Can anyone oblige? PM me if so.

One item of your choice can be had.. Beer, Money, Mail Order Korean Brides and the like..

[Kookie]

Anyone?

[crbdino]

My RS4 is in Carmel. You are welcome to come down and try.

[Kookie]

My RS4 is in Carmel. You are welcome to come down and try.

Thanks, I'll shoot you a PM if this weekend doesn't work out. I have to go to Monterey sometime in the next couple weeks anyway

[euromob]

kookie like the girlscout? lol

[Kookie]

kookie like the girlscout? lol

Yes, brown with dark spots.

[Kookie]

Anyone out there? I just need to throw one side on for fitment purposes.

I am meticulous about my car, and will respect yours identically.

[laundromatt]

255? would that fit? i'd be curious to know as well.

[Kookie]

255? would that fit? i'd be curious to know as well.

That's what I'm hoping to find out.

[S4Gwagon]

The previous owner of my car pretty much maxed out the available space. Here's a pic - it's running 19x10's in the back and 19x9's in the front with 235/35 all around in the front. He also added adjustable control arms in the rear to increase negative camber so that the wheels would tuck under the fender under some load. It's tight, but I think 235 is about as far as anyone recommends on a 19 inch rim without fender work.

http://sailinmike.zenfolio.com/img/s4/v12/p1013401948-3.jpg

[Kookie]

The previous owner of my car pretty much maxed out the available space. Here's a pic - it's running 19x10's in the back and 19x9's in the front with 235/35 all around in the front. He also added adjustable control arms in the rear to increase negative camber so that the wheels would tuck under the fender under some load. It's tight, but I think 235 is about as far as anyone recommends on a 19 inch rim without fender work.

http://sailinmike.zenfolio.com/img/s4/v12/p1013401948-3.jpg

http://img.tapatalk.com/d/14/02/26/amu4eve8.jpg

http://img.tapatalk.com/d/14/02/26/ypysemyp.jpg

http://img.tapatalk.com/d/14/02/26/a8ygyby7.jpg

http://img.tapatalk.com/d/14/02/26/ny3azybe.jpg

Thanks, I've got fender work done actually. Currently running 18x9.5 ET38 wrapped in 265/35's. Your car is beautiful! I had a Brilliant Red a couple of years ago! I attached some photos for you.

I think I'll be able to fit OEM RS4 wheels with the 255 width tire, but It would be so much easier to just throw two on on one side and see first hand.

I'm not looking to drive around on anyone's wheels, I just want to look at clearance. I'm pretty sure they'll fit, with about 1mm of clearance, but want to double check.

Regards,
Harith

[Kookie]

Here's a link to my calculations.

http://www.willtheyfit.com/index.php?width=265&aspect=35&diameter=18&wheelwidth=9.5&offset=38&width2=255&aspect2=35&diameter2=19&wheelwidth2=9&offset2=29#content

This statement is what makes me think I can fit it. I definitely have ~3mm to the outside Compared to your existing wheel, this new wheel will have an inner rim which is 15.4mm further away from the suspension strut. The outer rim will poke out 2.7mm more than before.

[washyourrhands]

hit me up. I am pretty busy, but maybe we have a time that will work well.

[S4Gwagon]

That is a sick avant! Best of luck, hope it works out for you.

[Kookie]

Bump - Still need a quick hand here