View Full Version : Power Issue.................... Need Help!!! AWN
rusky04
03-01-2013, 05:01 PM
I don't know where to start, i'm having issues with power to these connections in the plenum
http://i964.photobucket.com/albums/ae127/rusky04/IMAG0138_zps4c205f84.jpg
http://i964.photobucket.com/albums/ae127/rusky04/IMAG0139_zps853abc1f.jpg
I've went over all the fuses and seem to be fine, i've checked the main fuse that goes to power
terminal by the battery, ive replaced fuse 29, even though it was ok.
i have no idea why i'm not getting any power to these wires. i had power to them earlier, but
all of the sudden it disappeared[headbang], any input or help would be much appreciated!!!
thanks in advance !!!!
rusky04
03-02-2013, 03:21 AM
Anyone ?
rusky04
03-02-2013, 03:22 AM
All those wires are D23 over fuse 29
1gcrazy
03-02-2013, 03:33 AM
All those wires are D23 over fuse 29
Omg! Brilliant! You fixed it! Fails...He already replaced that fuse.
Wish I could help. Not great with wiring, happen to know what they go to? Connections at the plenum....? I'm curious...
rusky04
03-02-2013, 03:51 AM
By "He Already replaced that fuse" are you referring to me ??
Omg! Brilliant! You fixed it! Fails...He already replaced that fuse.
Wish I could help. Not great with wiring, happen to know what they go to? Connections at the plenum....? I'm curious...
rusky04
03-02-2013, 03:53 AM
I posted that so people would know that all those wires are D23 in AWN wiring diagram
All those wires are D23 over fuse 29
rusky04
03-02-2013, 04:01 AM
http://i964.photobucket.com/albums/ae127/rusky04/AWND23p1_zps9b14b40f.png
http://i964.photobucket.com/albums/ae127/rusky04/AWND23p2_zps52cfd39a.png
rusky04
03-02-2013, 05:05 AM
Could my problem be in the resistor C6
Sparkstack
03-02-2013, 05:30 AM
It looks like those wires are all crimped together, and are missing the connector. Does there happen to be a large connector plugged into something elsewhere in that area that appears to be missing a bunch of wires?
rusky04
03-02-2013, 06:24 AM
unfortunately no, i removed all the insulation around those wires, and that's what i got, all those run into the engine bay,to ignition coils, but one wire runs to ecu pin 3
It looks like those wires are all crimped together, and are missing the connector. Does there happen to be a large connector plugged into something elsewhere in that area that appears to be missing a bunch of wires?
rusky04
03-02-2013, 08:14 AM
Where in earth does D23 get power from? can it be from T10n/1 ????