PDA

View Full Version : 2.8 Oil leak(pics)



Noma12vA4
02-08-2013, 11:33 AM
Hey guys I apologize in advance for the picture sizes. I am currently hunting down an oil leak on my 2.8 12v coming from above the oil cooler/filter area. I was pretty sure that the oil pressure sender was the culprit after reading several other 12v's leaking from there, although, after looking closer I think I may be mistaken....

Here is a pic of the drip
http://i1107.photobucket.com/albums/h396/aharding09/photo1-1.jpg

Can somebody chime in as to why this hole looks like it should not be open....I feel like i'm missing something obvious here[confused]
http://i1107.photobucket.com/albums/h396/aharding09/photo.jpg

Thank You

wretchedwrench
02-09-2013, 05:14 PM
I think you need to keep looking up, that's the A/C compressor, not likely leaking oil unless your also losing your A/C charge too. In my case my a/c is dyed so there's green all over. I'd be suspecting valve cover or p/s lines. Oil pressure sender is much lower than that! Bolt hole not used, normal IMO.

Lornnn
02-09-2013, 05:49 PM
Your leak is farther up.. you can see it on the bottom of some of the lines.

fR3ZNO
02-10-2013, 07:21 AM
Your cam seal on that side could be leaking as well.