What is "Load Shift Flap - Opening Angle" in VAG-com block 143-2 ?

[shiro1745]

Mine shows 99.6 at idle, as soon as I accelerate, it instantaneous goes down to 0.
Anybody knows what exactly this block measures?

I wish there was a detailed explanation of all the measuring blocks in VAG-com.

[Jay-Bee]

Sounds to me like the intake flaps, they only close over when you are at idle, or during overrun decel.

[shiro1745]

I makes sense, I was thinking about that. I just need a confirmation.

It's interesting how not many people are interested in the many things VAG-com has to offer. There are many things I'm sure that make for a good diagnose tool if properly used. Too bad there's not enough interest..

[Jay-Bee]

I loved playing around with vag-com on my MK4, however it was a 2.0 8 Valve, there's only so many measuring blocks to look at lol.

I've been using torque+obd bluetooth on the B7, I was able to get 1 cable working with my (hacked, don't ask lol) Vag-com, and did some recoding like the window modules/1click unlock and stuff, but I gave that cable to the guy who bought my Golf, i've bought 2 of the same ebay cables since and haven't been able to get it working the same.

I can't remember if the bentley manual references any measuring blocks, haven't cracked it open in a while, but when i get a chance i'll check it.

[mec]

Je me sais pas! I would think intake flapper angle as well though. Buy apr's software and find out how they work!

[shiro1745]

Haha, I should get my stock injectors back in and reflash with APR stage2+ since I already have that purchased.