Avant Garde M510 Concave 5 Spoke Wheels | Just Arrived!

[sonictuning]

M510

http://avantgardewheels.com/images/wheels/M510-Satin-Silver-440.jpg
http://avantgardewheels.com/images/wheels/M510-Satin-Silver-lay-440.jpg

Available in:
19x8.5 19x9.5 (Early 2013 ETA, no pricing yet)
20x8.5 ET35 20x10 ET35

Color Finish:
Mirror Polish | Silver

M550

http://avantgardewheels.com/images/wheels/M550-Satin-Silver-440.jpg
http://avantgardewheels.com/images/wheels/M550-Satin-Silver-lay-440.jpg

Available in:
19x8.5 19x9.5
20x9 20x10.5

Color Finish:
Satin Silver


http://farm9.staticflickr.com/8465/8103125903_613d0e78df_c.jpg
http://farm9.staticflickr.com/8050/8126392146_392fd553e2_c.jpg
http://i110.photobucket.com/albums/n94/chrissurfr/PhotoNov0122247PM.jpg
http://i110.photobucket.com/albums/n94/chrissurfr/PhotoNov0122227PM.jpg
http://i110.photobucket.com/albums/n94/chrissurfr/PhotoNov0115657PM1.jpg
http://i110.photobucket.com/albums/n94/chrissurfr/PhotoNov0110315PM1.jpg

[staticuxo]

what offset on the 20x10 set? et36-45ish is what i'm looking at.

[sonictuning]

what offset on the 20x10 set? et36-45ish is what i'm looking at.

The M510 comes in ET35 20x10.

It will be flush with your fender.

[A5RIZ]

Those would sweet in 20's

[sonictuning]

Those would sweet in 20's

Thanks buddy, hopefully Sandy didn't do that much of damage in your area.

Cheers,

[DavidD]

Any pics of the M510 on a B8 S4 or A4 yet?

[sonictuning]

Any pics of the M510 on a B8 S4 or A4 yet?

Not yet, the container just arrived yesterday.

It would look good on your Sprint Blue!

[Okan509]

http://i110.photobucket.com/albums/n94/chrissurfr/PhotoNov0122247PM.jpg
http://i110.photobucket.com/albums/n94/chrissurfr/PhotoNov0122227PM.jpg
http://i110.photobucket.com/albums/n94/chrissurfr/PhotoNov0115657PM1.jpg
http://i110.photobucket.com/albums/n94/chrissurfr/PhotoNov0110315PM1.jpg

on s5

[sonictuning]

on s5

Thanks for the pictures! They look AMAZING!

[Erwheezy]

I need these. Just bought the m310's a little over a month ago. Damn.

[CONTROL TWO]

what would the offset for the incoming 19x9.5's be??

[sonictuning]

I need these. Just bought the m310's a little over a month ago. Damn.

Sorry to hear that buddy, I am pretty sure if you list them someone will take them off your hands.


what would the offset for the incoming 19x9.5's be??
Should be ET35-ET40.

[sonictuning]

PMs replied

[catch]

Really thinking about grabbing these in 20x10s sooo nice

[sonictuning]

Really thinking about grabbing these in 20x10s sooo nice

Thanks bud

[handruin]

I really like the M510s. Will the 19x8.5 and 19x9.5 be available by spring time? Any information on the weights of those sizes? Do they come in the right bore size for an S4 or are rings required?

[phatAvant]

Any 20's that would fit the B8 A4/S4? Can you please PM me pricing?

[batman_4]

m510 looks great....sub'd for pics on an A4/S4

[pandi]

BMW forum sucks so I will post here. These look like the ADV.1 wheels I originally wanted for my S4. I want them for my BMW!

http://i1146.photobucket.com/albums/o536/acvmd2003/BMW.jpg

[Killaapp]

Damn those m510s are HOT

[handruin]

I agree. I've been trying to decide on a wheel for next spring and if this one looks as good on a B8 S4 as it does on those cars, I may be in for four new wheels assuming proper fitment can be done.

[sonictuning]

Damn those m510s are HOT


I agree. I've been trying to decide on a wheel for next spring and if this one looks as good on a B8 S4 as it does on those cars, I may be in for four new wheels assuming proper fitment can be done.

Thanks for the kind words guys, we will post pictures once we test fitment on B8 S4.

[sonictuning]

PMs replied!

[handruin]

Any word/update on pictures from test-fitting a B8 S4? I'm still interested in these once the 19" are available.

[SteveYem]

Also in for pics of the M510 on a B8. They look sick on that BMW sedan....hoping for similar results on the B8.

[sam01]

If only M510's came in a 20x9 or 9.5. [:(]

20x10 with 35mm is just too aggresive for me and the 8.5 face is too flat.

[jdwk]

I've read through the wheel fitment sticky before and I am pretty sure that 20x10 at ET35 doesn't have a prayer of not rubbing. Maybe at stock height and no one in the back, but the wheel is definitely past the fenders at that point.

You are adding .75" from the center out and then another 10mm from the offset, for a total of about 29mm. I just don't see that happening. I am sure you could stretch some 255's on there and deal with the occasional rub on the bounce, but stretching tires totally defeats the purpose of wider wheels. It also looks retarded and exposes the wheel to damage.

I've never been that big of a fan of the concave look anyway. I really do like this design of the 510s though. Curious to see the pics of the 19"s when they get in. The 9.5"s at ET35 will also not clear the fender even with stock 255 tires stretched. ET40 might just barely make it and possibly allow 265s for a slight increase in tread and less obnoxious stretch.

Audi just didn't give us much room for a lot of rubber in this car. That's what RS4's are for. Too bad they didn't give the US one this time around.

[sonictuning]

Any word/update on pictures from test-fitting a B8 S4? I'm still interested in these once the 19" are available.


Also in for pics of the M510 on a B8. They look sick on that BMW sedan....hoping for similar results on the B8.


If only M510's came in a 20x9 or 9.5. [:(]

20x10 with 35mm is just too aggresive for me and the 8.5 face is too flat.


I've read through the wheel fitment sticky before and I am pretty sure that 20x10 at ET35 doesn't have a prayer of not rubbing. Maybe at stock height and no one in the back, but the wheel is definitely past the fenders at that point.

You are adding .75" from the center out and then another 10mm from the offset, for a total of about 29mm. I just don't see that happening. I am sure you could stretch some 255's on there and deal with the occasional rub on the bounce, but stretching tires totally defeats the purpose of wider wheels. It also looks retarded and exposes the wheel to damage.

I've never been that big of a fan of the concave look anyway. I really do like this design of the 510s though. Curious to see the pics of the 19"s when they get in. The 9.5"s at ET35 will also not clear the fender even with stock 255 tires stretched. ET40 might just barely make it and possibly allow 265s for a slight increase in tread and less obnoxious stretch.

Audi just didn't give us much room for a lot of rubber in this car. That's what RS4's are for. Too bad they didn't give the US one this time around.


19" fitment will be out early next year.

This is Incuve 20" which has similar sizing to the M510 on B8 A4. (20" Staggered)
http://farm9.staticflickr.com/8064/8206180147_2529efebed_c.jpg

[catch]

I think im willing to try a set of 20x10 on my slammed 2013 s4... If any vendors are willing to work something out with me

[Pootz]

Any pics of the M550 on a B8? Would like to see a picture with 19s and if you could PM me prices on those, I'd appreciate it.

[sonictuning]

Another shot of the M510!
https://sphotos-a.xx.fbcdn.net/hphotos-frc1/860998_610120169003632_396529121_o.jpg

[PoopinClumpin]

Looking for a price on the M510 in 19x8.5" ET35

[Tomasz@Startup]

How can I buy these? Web site does not have prices, wheels listed.

[snakeawesome]

Any pics of the M550 on a B8? Would like to see a picture with 19s and if you could PM me prices on those, I'd appreciate it.

+1

Was looking at getting a set of the M550 in either Matte Black or Dolphin Grey. Standard 19" x 8.5".

[jran76]

How can I buy these? Web site does not have prices, wheels listed.

Did you try to PM or call Sonic? I bought my BC wheels from these guys and they were really easy to work with (even on custom wheels).