PDA

View Full Version : Sean01s4's 034motorsports Single turbo build



sean01S4
09-08-2012, 07:06 PM
ok so i told myself i wasnt going to make one of these but oh well im bored. lol so here it is..it started in 2010 when i picked up my k04 stg3 s4..... Not to long after owning the car I went to epl for their stg3 fuel kit/tune and come to find out car had ebay k04's [headbang] but still made a respectible 370whp on pump gas. Soon after that I picked up a set of tial 650 turbos and threw almost every bolt on possible and made 500whp in 95* shop weather with 93+meth. Few months after having fun with that i ended up blowing the trans at waterfest[facepalm].....Sooooooo the blown trans turned into this build lol......What will be done is


Pistons : Stock
Rods : I.E Rods
Heads : 2.8 30v 3angle valve job/port & polish
Intake Manifold + TB : 02 Stock Intake manifold
Injectors : EV14 Bosch 750cc
Exhaust : 034 3.5 Single from turbo back
Clutch : Southbend Stg4 extreme 6puck/Southbend steel billet flywheel
Manifolds : 2.8 V6
Catch Can : undecided
Pump : 044 Drop In for now
Fuel Rails : 034
Tune : Undecided


Turbokit : Full 034 Single Turbokit

Turbo : Precision 6262 with ceramic BB + Turbo Blanket
Intercooler : Precision 750hp
Intake : Undecided


Additional stuff
H&R/Bilstien springs/struts
Jhm SS Trio package
Apokil Rear diff mount
Jhm DTS bar
Porsche 330mm Front bbk
Complete timing belt job/gaskets
Euro Trunk
Euro rear bumper
034 coated main & rod bearings
Usp motorsports metal slave cylinder
Fresh Rebuilt Transmission with scotty's rebuild kit + new 3rd and 4th gears also
034 motor/trans mounts
Probably forgetting some stuff will try to update when I can.....Enjoy!!

http://i1088.photobucket.com/albums/i323/Sean01s4/IMAG0130-2.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/IMAG0133-2.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/IMAG0141-1.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/IMAG0078-2.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/IMAG0189-1.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/IMAG0191-1.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/IMAG0192-1.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-07-28_19-06-24_601.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-07-28_20-25-07_82.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-08-21_16-24-35_290.jpg

oldskoolaudi
09-08-2012, 07:33 PM
me like, me jealous.

aysix
09-08-2012, 07:58 PM
Nice, that car has been down for a while.

sean01S4
09-08-2012, 08:02 PM
^^^dont remind me lol...wanna help put it back together? lol you should see the mess ask ian

aysix
09-08-2012, 08:09 PM
^^^dont remind me lol...wanna help put it back together? lol you should see the mess ask ian

ha, I bet it is with your size garage. I've got two a6's ripped apart in mine. Lol...if you do need help turning a wrench i'm in. Any reason why you pulled the motor out with the motor mounts still in?

AudiForeman
09-08-2012, 08:14 PM
I'm in for this, can't wait to see it finished. I think I'm going to scrap my tials and go single.

sean01S4
09-08-2012, 08:18 PM
It was just the way it came out LOL...it was my cousin and I first time pulling it and we followed a write up.

Turbwhistle
09-08-2012, 08:28 PM
I'm in for this, can't wait to see it finished. I think I'm going to scrap my tials and go single.


[facepalm]..

TLO03
09-08-2012, 08:46 PM
can i get a ride?

Austonwerner4
09-08-2012, 09:37 PM
Glad were in the same boat.
I too am getting a euro trunk.

S4 00 2.7
09-08-2012, 10:20 PM
Another cool thread. [up] on the BB turbo.

slowrideBC
09-08-2012, 10:48 PM
i love your hood...bowser style....where did you get that?

sweet build...ill be watching for sure

did u get the extra oil passages in the IE rods?

Austonwerner4
09-09-2012, 09:44 AM
I just noticed all the rust on the front of your car, powder coat or paint it. Make it look nice and clean. I painted my block with come high temp brush paint. The spray sucks.

Sl0w_S4
09-10-2012, 06:40 AM
Cant wait for this car to be done!

sean01S4
10-05-2012, 10:32 PM
can i get a ride?

Sure lol

sean01S4
10-05-2012, 10:33 PM
Another cool thread. [up] on the BB turbo.

Thank you sir

sean01S4
10-05-2012, 10:35 PM
i love your hood...bowser style....where did you get that?

sweet build...ill be watching for sure

did u get the extra oil passages in the IE rods?

I got the hood from a group buy few years back on here from a company called vexmotorsports...i dont even think they are still around lol

sean01S4
10-05-2012, 10:37 PM
I just noticed all the rust on the front of your car, powder coat or paint it. Make it look nice and clean. I painted my block with come high temp brush paint. The spray sucks.

Thats my old motor with the tials...i had a spare motor and all that was taken care of :)

sean01S4
10-06-2012, 01:28 AM
Thought i'd share some more pics...i am picking up my motor and trans tomorrow/Saturday and will snap some more pics for you guys

http://i1088.photobucket.com/albums/i323/Sean01s4/2012-09-21_15-20-12_834.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-07-28_20-26-10_819.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-08-18_19-25-58_757.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-09-21_15-21-28_498.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/IMG956802.jpg

sean01S4
11-14-2012, 01:25 PM
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-11-13_10-09-20_858.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/Screenshot_2012-11-06-22-38-55.png
http://i1088.photobucket.com/albums/i323/Sean01s4/FB_IMG_13528200236355333.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-11-07_15-17-36_541.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-11-14_02-02-42_203.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-11-13_22-04-51_685.jpg

Eurotuned_A4
11-14-2012, 01:50 PM
I need to stop looking at these stk threads because Im getting tempted again....

Austonwerner4
11-14-2012, 02:37 PM
Let me know how you get your wheels to fit. Cause I have the exact same ones and I can't get them to clear over the stock front calipers. But everything else looks awesome.

My waste gate didn't come with any springs?

s4930
11-14-2012, 02:45 PM
Let me know how you get your wheels to fit. Cause I have the exact same ones and I can't get them to clear over the stock front calipers. But everything else looks awesome.

My waste gate didn't come with any springs?

Thats strange it should have

034Motorsport
11-14-2012, 02:46 PM
Polished compressor housing looks rad Sean!


Let me know how you get your wheels to fit. Cause I have the exact same ones and I can't get them to clear over the stock front calipers. But everything else looks awesome.

My waste gate didn't come with any springs?

Sean somehow ended up with all the all the WG spring options. This is not how they normally come.

sean01S4
11-14-2012, 02:51 PM
I guess i got a different one..i got the 44mm one you got the 38mm i believe...ken said some come with more then one if you want to swap them out i guess....and yes i will let you know about the wheels because ive been hearing i need 5mm spacers then i hear i need 15+mm spacers...i might sell them if they require a large spacer...

sean01S4
11-14-2012, 02:52 PM
Thanks max! The whole kit looks great! Cant wait to pick up motor/trans this weekend

034Motorsport
11-14-2012, 04:12 PM
I guess i got a different one..i got the 44mm one you got the 38mm i believe...ken said some come with more then one if you want to swap them out i guess....and yes i will let you know about the wheels because ive been hearing i need 5mm spacers then i hear i need 15+mm spacers...i might sell them if they require a large spacer...

They are both 44mm. Only the 44mm works with our STK. When you order a wastegate, you can order it with a specific wastegate spring, or you can get all of the different springs if you want to fine tune but it costs extra. You accidentally received all of them.

Because of an N75, you have a wide range of operating pressures with a single wastegate spring. In general, you want to run a spring pressure about 50-75% the max boost pressure you plan on running to reduce duty cycle, etc. Swapping around spring pressures isn't advised as your duty cycle will be different.

sean01S4
11-14-2012, 04:46 PM
Oh ok wasnt sure because austin sent me a link to the 38mm

Monty23
11-14-2012, 05:04 PM
My 44mm came with a 1bar spring, pretty sure that's standard. It tells you on the outside of the box what spring is installed in the wastegate.

S4 Big Head
11-14-2012, 05:06 PM
This is so awesome.. can't wait to see it dialed in and running [up]

Monty23
11-14-2012, 05:10 PM
OP what hood its that?

sean01S4
11-14-2012, 05:49 PM
It is a boser hood....and my wastegate didn't have a spring in the wg i had 7 loose springs in my box

sean01S4
11-14-2012, 05:50 PM
This is so awesome.. can't wait to see it dialed in and running [up]

Thanks man! I cant wait either...car has been down since December

S4 00 2.7
11-14-2012, 08:14 PM
I like it when big boxes arrive at at my doorstep.

Quality stuff. [up]

s4930
11-14-2012, 09:21 PM
When are you planning on having your build completely up and running? Your setup is exactly what I'm heading towards so it'll be nice to see some results! Everything looks great good luck with the build!

Austonwerner4
11-14-2012, 09:59 PM
15mm don't help clear them... I maxed out my stud kit. So I'm stuck too.

sean01S4
11-14-2012, 11:04 PM
15mm don't help clear them... I maxed out my stud kit. So I'm stuck too.

What length studs you went with? I ordered the 3" i think

sean01S4
11-14-2012, 11:07 PM
When are you planning on having your build completely up and running? Your setup is exactly what I'm heading towards so it'll be nice to see some results! Everything looks great good luck with the build!

Im trying to have it wrapped up in a few weeks...i have alooottttof stuff to do..im pretty much rebuilding the entire car all over

sean01S4
11-14-2012, 11:15 PM
Few more :)

http://i1088.photobucket.com/albums/i323/Sean01s4/2012-11-14_21-35-06_395.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-11-14_21-36-05_127.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-11-14_21-38-30_94.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-11-14_21-44-25_729.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-11-14_23-23-26_344.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/2012-11-14_23-27-12_774.jpg

hendrj5689
11-14-2012, 11:34 PM
so much win here, can't wait to see it running!

DESPOT D S4
11-15-2012, 12:03 AM
Just stoping by to say I love this and I can't wait to see it running.
Good luck with everything. And make sure to take LOTS AND LOTS of pictures

sean01S4
11-18-2012, 12:22 PM
Trans being rebuilt (courtesy of AMC) go see him if you need your trans rebuilt

http://i1088.photobucket.com/albums/i323/Sean01s4/IMG951623.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/IMG952670.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/AF9B24A0-36C9-447C-B618-790617EA54C3.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/1CF1BB9C-7746-4115-93C9-19F8ACC1FFE7.jpg
http://i1088.photobucket.com/albums/i323/Sean01s4/IMG954329.jpg

Austonwerner4
12-17-2012, 07:44 AM
?
http://www.audizine.com/classifieds/showproduct.php?product=83640&title=fs-034-single-turbo-kit-21&cat=23
?

britishturbo
12-17-2012, 10:11 PM
Selling the kit???

Austonwerner4
12-18-2012, 05:15 PM
He found a car so he needs to sell this. He's going to do the build at a later date.

Meow
06-04-2013, 01:25 AM
He found a car so he needs to sell this. He's going to do the build at a later date.

sad to see this :(