The RS4-style grill has arrived!

[yamanote]

As I am currently in Hong Kong, I was able to get the (very nearby) supplier ship the grill directly to me. So here's what you can expect:

http://i1190.photobucket.com/albums/z451/yamanote/IMG_0893.jpg

http://i1190.photobucket.com/albums/z451/yamanote/IMG_0894.jpg

http://i1190.photobucket.com/albums/z451/yamanote/IMG_0895.jpg

http://i1190.photobucket.com/albums/z451/yamanote/IMG_0896.jpg

http://i1190.photobucket.com/albums/z451/yamanote/IMG_0897.jpg

http://i1190.photobucket.com/albums/z451/yamanote/IMG_0898.jpg

http://i1190.photobucket.com/albums/z451/yamanote/IMG_0899.jpg

http://i1190.photobucket.com/albums/z451/yamanote/IMG_0903.jpg

I actually ordered the satin silver surround grill but there seems to have been a mix-up and I was sent a gloss black surround grill, so this is going right back to the supplier for a replacement.

I'm told that I only got the RS4 trunk badge and Audi rings because I had the item sent to me directly from the supplier, which means those who are getting the item sent out from XXX fulfillment center still won't be getting them because of customs issues.

Looks very nice though, though I'd prefer to have it in the color I ordered [:p]

[Dcass08]

No copyright laws in China. Take a look at some of the new Chinese cars sometime. It's like they just swapped badges with some Mercs and bmw's.

[NoR32]

Very nice congrats and thanks for your purchase. Can't wait to see it installed.

[catch]

Very nicem!

[RavinJetta]

Looks great I can't wait to get mine

[Skidrowe]

Hopefully that means that the rest of ours are on a ship on their way over now. It looks good. Thanks for providing the pictures.

-Skid

[SASKCHAUCH]

Can't wait for this !

[dawei213]

Damn, I can't believe i missed out on this GB... I don't even know why I didn't check the site that week. Oh well, hopefully there will be another one.

[motionneon]

Damn, I can't believe i missed out on this GB... I don't even know why I didn't check the site that week. Oh well, hopefully there will be another one.

Twas the biggest group buy ever!

[Blake P]

It could get messy sending these things back and forth overseas. Here's hoping they don't screw ALL the orders up![:p]

[Calbee]

Great to see that it looks so nice, sad that we won't have the rings! Another local b8 had it and looked sweet! His was chrome though

[dparm]

Link to original GB thread?

[Blake P]

Link to original GB thread?

It has been nuked.
http://righteousreign.webs.com/photos/God-Complex/nuclear-bomb-test.jpg

[motionneon]

Great to see that it looks so nice, sad that we won't have the rings! Another local b8 had it and looked sweet! His was chrome though

Will rings from original grill pop off and fit for reinstall?

[dparm]

I assume this is the same one I see on eBay for around $250?

[yamanote]

Thanks for the feedback, it does look fairly high quality. The supplier says they're going to send the correct one out first thing tomorrow so here's hoping I get the replacement before I leave HK.

The original Audi rings are supposed to be a direct fit onto this grill, but some people say that the clips used are designed for one use only so several people are buying new rings specifically for this. There's a GB request here (http://www.audizine.com/forum/showthread.php/490046-Chrome-Audi-Ring-Emblem-for-Front-Grill-B8-A4-S4) which Europrice are going to be helping out on.

Yes, this is the same grill that 'jcsportline2009' is selling on eBay (they're the supplier for this grill in the GB). You'll be paying roughly $100 more than the GB price though ($220+$75 shipping).

[Blake P]

Gents, no more GB talk or this thread will be locked. Thanks.

[JohnEnglish]

Why is the mesh in the rings a different pattern than the mesh in the grill?

[M3 Montreal]

I just ordered this off Ebay.

Already got an email from supplier in China that it`s in box and on the way !

Can`t wait to get it and install it!

[dparm]

Why is the mesh in the rings a different pattern than the mesh in the grill?


I think because they're reusing a set of rings from another grille. I suspect once you install it, it won't be noticeable.

[NoR32]

I think because they're reusing a set of rings from another grille. I suspect once you install it, it won't be noticeable.

+1

[motionneon]

***Moderator note*** READING COMPREHENSION FAIL: http://www.audizine.com/forum/showthread.php/493276-The-RS4-style-grill-has-arrived!?p=7789694&viewfull=1#post7789694

[Skidrowe]

Why is the mesh in the rings a different pattern than the mesh in the grill?

All the pictures I've seen of RS grills show the mesh within the rings to be made of a smaller pattern like you see on these. So if I had to hazard a guess, I would say it's that way on these in order to more closely imitate OEM RS grills.

-Skid

[SASKCHAUCH]

10-15 days

[dparm]

All the pictures I've seen of RS grills show the mesh within the rings to be made of a smaller pattern like you see on these. So if I had to hazard a guess, I would say it's that way on these in order to more closely imitate OEM RS grills.

-Skid


It may also be to reinforce the emblem area, since that's a weak spot being in the middle.

[FatalBert]

The original Audi rings are supposed to be a direct fit onto this grill, but some people say that the clips used are designed for one use only so several people are buying new rings specifically for this.

That is absolutely not true. If you remove the rings correctly they will stay fully intact and be able to be used again anywhere. Anyone who has taken the emblems off without snapping clips knows this...

[Gotchaa]

So you can take the rings off a 2013 properly and use it on this grill? Are there any fit issues?

[richib86]

... sure why not...
So you can take the rings off a 2013 properly and use it on this grill? Are there any fit issues?

[Gotchaa]

... sure why not...

not sure if you mean there are no fit issues in that the GRILL will fit without any crazy mods or cutting (heard the RS5 grill was an issue)

[richib86]

are you putting this grill on a 2013?

[Gotchaa]

are you putting this grill on a 2013?

Yes will it work without any issues?

[richib86]

no, it won't work, buy an oem rs4 grill when they become available

[yamanote]

That is absolutely not true. If you remove the rings correctly they will stay fully intact and be able to be used again anywhere. Anyone who has taken the emblems off without snapping clips knows this...

Got it. Just relaying on what I read, wasn't making any claims myself. Bit strange how there are people on here looking to purchase another set of rings specifically for this grille if it's that easy to swap them out then.


So you can take the rings off a 2013 properly and use it on this grill? Are there any fit issues?

The rings off a 2013 should fit. The grille however is a completely different shape...


Just arrived back in Vancouver a few days ago, an undamaged satin silver surround grille in tow. I'll be getting it installed in a week or two. Here's a quick pic of how it was packaged up for the 10,000km journey over...

http://i1190.photobucket.com/albums/z451/yamanote/IMAG0298.jpg

Foam sheets and balled-up paper inside for padding. Doesn't sound like much but it evidently worked fine.

http://i1190.photobucket.com/albums/z451/yamanote/IMAG0299.jpg

And the grill itself:

http://i1190.photobucket.com/albums/z451/yamanote/IMAG0301.jpg

As you probably notice, the RS4 badge is missing. It looks like I completely overlooked this because I was too busy looking for any damage. [:o]

And some close ups of the satin silver finish.

http://i1190.photobucket.com/albums/z451/yamanote/IMAG0303.jpg

http://i1190.photobucket.com/albums/z451/yamanote/IMAG0304.jpg

It's definitely not the same finish as on the mirror caps- there's a clear glossy layer over the paint. The paint looks like a good match though, and it looks the same from a distance, so I'm still happy with it. Looking forward to seeing it on my car.

Oh, and the RS4 trunk badge? It certainly wasn't going anywhere near my car, so I've slapped it on my fridge [:D]

http://i1190.photobucket.com/albums/z451/yamanote/IMAG0305.jpg

(it is actually aligned properly, it just looks off at this angle)

[nunonbreak]

Dammit. Mine still says not shipped. It has been 35 days.

[Deckdout2]

Got it. Just relaying on what I read, wasn't making any claims myself. Bit strange how there are people on here looking to purchase another set of rings specifically for this grille if it's that easy to swap them out then.



The rings off a 2013 should fit. The grille however is a completely different shape...


Just arrived back in Vancouver a few days ago, an undamaged satin silver surround grille in tow. I'll be getting it installed in a week or two. Here's a quick pic of how it was packaged up for the 10,000km journey over...



What are your plans for the badge? I'm curious as to how you're going to go about tackling that since you didn't get an RS4 badge for it to modify the mounting points.

[yamanote]

Dammit. Mine still says not shipped. It has been 35 days.

Might still be on the ship over.


What are your plans for the badge? I'm curious as to how you're going to go about tackling that since you didn't get an RS4 badge for it to modify the mounting points.

Not sure, I've sent them an email to see whether or not they can arrange for the supplier to send me a new badge. Maybe I'll just superglue the S4 badge on? [:p]

[aryaf]

***MODERATOR NOTE: no unauthorized GB discussion is welcome on Audizine

[SASKCHAUCH]

There was a post somewhere about using the stock s4 badge. They had put the stock badge in really hot water to loosen the glue or tape, then just mound it onto the rs4 backplate. Can't wait for this.. should be 10-15 days out or so

[richib86]

you can do that but it will look silly. the rs4 backplate is huge compared to the stock one, my method looks the most oem and is removable like oem
There was a post somewhere about using the stock s4 badge. They had put the stock badge in really hot water to loosen the glue or tape, then just mound it onto the rs4 backplate. Can't wait for this.. should be 10-15 days out or so

[SASKCHAUCH]

and that method would be......[confused]

[richib86]

http://www.audizine.com/forum/showthread.php/490127-Rs4-grill-installed?p=7714227&viewfull=1#post7714227
and that method would be......[confused]
here are more shots of the rs4 badge before i cut it up
http://i911.photobucket.com/albums/ac317/richib86/36a902c1.jpg
http://i911.photobucket.com/albums/ac317/richib86/e46d1584.jpg
http://i911.photobucket.com/albums/ac317/richib86/f334ab18.jpg

[FatalBert]

http://www.audizine.com/forum/showthread.php/490127-Rs4-grill-installed?p=7714227&viewfull=1#post7714227
here are more shots of the rs4 badge before i cut it up


You got measurements for those cuts? [:)]

[rx7ven]

All the pictures I've seen of RS grills show the mesh within the rings to be made of a smaller pattern like you see on these. So if I had to hazard a guess, I would say it's that way on these in order to more closely imitate OEM RS grills.

-Skid

its actually like that with the OEM grill too
http://www.autoblog.com/photos/audi-rs4-avant-geneva-2012/#photo-4871521/

[kiznarsh]

In for installed pics on the car.

The PO of my car painted the grill surround black with kyrlon and it's starting to chip away. Can't decide if I wanna get the whole grill painted at a body shop or get this grill. [confused]

It'll probably be a wash in terms of cost. I guess the HomeLink sensor can be glued under the intake scoop like someone else mentioned and I could always paint the crash bar black if it really stands out.

[Newgrad11]

I'd love for someone to do a detailed DIY for this install.. Especially moding the badge, placing the homelink etc

The more pictures the better IMO, I'm new to this lol

[richib86]

the pics i posted are all u should need to get the badge on there

[Jeembo]

the pics i posted are all u should need to get the badge on there


Rich's car looks sick in person with this grill

[NPuter]

Richi, this is your car, correct? I like the way you used a BO filler to cover the crash bar [up]

http://i1052.photobucket.com/albums/s452/2012S4/DSC03101.jpg

[richib86]

yessir thats me trying to keep it as oem like as i can haha
Richi, this is your car, correct? I like the way you used a BO filler to cover the crash bar [up]

http://i1052.photobucket.com/albums/s452/2012S4/DSC03101.jpg

[NoR32]

What did you have to do to get the filler plate to stay in place?

[richib86]

i bolted it right to the crash bar
What did you have to do to get the filler plate to stay in place?

[misc720]

yessir thats me trying to keep it as oem like as i can haha

Damn now I gotta order one of those filler plates.

Nice work.

[KayS4]

That is awesome I ordered mine waiting for it cannot wait to get it in there waht did you bolt it onto ? Did you take the bolts off the crash bar and send the bolt through the plate filler? Looks awesome! The S4 badge fitted just fine? Looks great sucks us in Ontario have to have a front plate! Still trying to decide How and where I am going to fit that bad boy. Looks so good.

[Calbee]

I'm also interested in knowing how you mounted the fillet underneath. Looks clean!

Guess I won't be selling my filler after all

[yamanote]

Sorry to disappoint anyone who's waiting for me to install it and post pictures, but I've decided not to install it and sell it instead as I may be getting into another car fairly soon.

[FatalBert]

This GB grille is taking too long to receive. Anyone else get the urge to do a charge back on the cc?

[Jones2012s4]

This GB grille is taking too long to receive. Anyone else get the urge to do a charge back on the cc?


Did you receive mass drops last email update? It explains the situation.

[FatalBert]

Did you receive mass drops last email update? It explains the situation.

Yes I did, unfortunately CC disputes have a time limit of 60 days. So whatever happens here on out we have no power over.

They could very well say the grilles got confiscated at customs and we would be the ones stuck with thumbs up our @$$es.

I know it sounds like paranoia but I don't like being put in a position of blind faith on a company I have never dealt with before...

[AKPS4]

Richi, this is your car, correct? I like the way you used a BO filler to cover the crash bar [up]

http://i1052.photobucket.com/albums/s452/2012S4/DSC03101.jpg



This looks freaking amazing where can I get one? All black with black trim to match my titanium package! Someone please let me know if you know! PM best. Thanks. No scams please.

How was the fit? Direct bolt in?

[ENV²]

This looks freaking amazing where can I get one? All black with black trim to match my titanium package! Someone please let me know if you know! PM best. Thanks. No scams please.

How was the fit? Direct bolt in?

Im guessing you could always paint the OEM platinum filler with Matte black platic paint or use plastidip and it will work just as well. I will be doing this if my grill ever shows up.

[SASKCHAUCH]

This GB grille is taking too long to receive. Anyone else get the urge to do a charge back on the cc?

At this point, I wish I would have just ordered one off of ebay. It wasn't worth saving a few bucks.

http://www.alibaba.com/product-gs/594423517/A4_B8_RS4_Grill_Grille_for.html
http://www.alibaba.com/product-gs/594411315/A4_OEM_RS4_Grill_Grille_for.html

[NoR32]

Had you bought one off eBay it would have been $400. Yes NOW the eBay price is $290 after shipping but how do you think it became that accessible? Because there was a GB that took place how come people can't get that.

[Blake P]

Had you bought one off eBay it would have been $400. Yes NOW the eBay price is $290 after shipping but how do you think it became that accessible? Because there was a GB that took place how come people can't get that.

True, but...
http://i.qkme.me/35mubq.jpg

[SASKCHAUCH]

Had you bought one off eBay it would have been $400. Yes NOW the eBay price is $290 after shipping but how do you think it became that accessible? Because there was a GB that took place how come people can't get that.

Im pretty sure JCSPORTLINE was in business way before the GB ever got started..... don't get what you are trying to say here.

http://www.aliexpress.com/product-gs/612001070-A4-B8-RS4-Grill-Grille-for-Audi-A4-S4-B8-8K-fits-for-standard-bumper-wholesalers.html

[dropshadow]

He's saying the group buy drove down the price of the individual grill. Demand has subsided, supply has increased, so the price has come down.

[NoR32]

True, but...
http://i.qkme.me/35mubq.jpg

How come everything I post is me being mad? I'm not mad I was just saying that because other people are
Mad and that's an explanation of what I think has happened to current prices on eBay.

I like that picture though. I actually laughed out loud.

[NoR32]

He's saying the group buy drove down the price of the individual grill. Demand has subsided, supply has increased, so the price has come down.

Exactly

[Blake P]

I like that picture though. I actually laughed out loud.

Good, then I did my job for the day!

[NoR32]

Good, then I did my job for the day!

Yeah you may go home with the rest of the day paid.

[Blake P]

Yeah you may go home with the rest of the day paid.

Hell yeah!
http://media.tumblr.com/tumblr_m7zwncBYn41qalk92.gif

[ENV²]

Outstanding situation we have since I bet someone ordering their grill from Ebay today will get it before any of us GBers

[FatalBert]

Outstanding situation we have since I bet someone ordering their grill from Ebay today will get it before any of us GBers

I would have to agree, and this is 2 months after the GB ended...

[AWDLover]

Outstanding situation we have since I bet someone ordering their grill from Ebay today will get it before any of us GBers

Really depends on how much 90$ is worth to you and the need to put the grill on now. I would like to get it, but my current grill is fine. If I had no grill I'd be pretty upset with the delays, but when working in manufacturing you get used to dealing with unforeseen delays.

If you really need the grill fast, buy it from Ebay and then sell the GB one when it comes in...

[dropshadow]

You guys realize that the GB grills had to be manufactured, packaged, shipped, clear customs (twice), and then will still have to be distributed across the country once they get to the US? We got a hell of a deal on them, so be patient. Otherwise, spend the extra $90 and buy one now, then throw your GB grill into the classified section when it arrives, and you'll be able to get at least what you paid for it back.

[ENV²]

Dont take my posts incorrectly I am not complaining or angry about it. I just stated a fact about people recieving ebay ones faster. Ive already waited this olng and I can wait another week or so I just want to make sure I get my grill. The wait has allowed me to beging prepping the plate filler crash bar "cover" and have some other parrts put on my car.

[madmadS4]

I think our moderator has hit the bottle a little early on a Friday.

I'm also pissed about the grill. It should friggin be here by now, but I do believe the customs bit. Customs can always take a while. Still hangin on...

[FatalBert]

Dont take my posts incorrectly I am not complaining or angry about it. I just stated a fact about people recieving ebay ones faster. Ive already waited this olng and I can wait another week or so I just want to make sure I get my grill. The wait has allowed me to beging prepping the plate filler crash bar "cover" and have some other parrts put on my car.

I don't foresee them showing up on our doorsteps sooner than September at this point.

[Newgrad11]

Any reason to be worried that these won't get past customs? Maybe copyright issues.. that's the reason the rings didn't ship right? One or two doesn't draw they same attention as hundreds loaded into one container.

[SASKCHAUCH]

Anyone remember what the final price was on the grill ? I thought it was $174.99

I just looked at the info again and I think it changed



Cost of Items: $205.00

Credit Card Fee: $5.87

Shipping & Handling: $40.00

Total: $250.87

Paid: $220.86

Refund: $-30.01

Refund Status: Issued on June 19th, 2012

[dparm]

Any reason to be worried that these won't get past customs? Maybe copyright issues.. that's the reason the rings didn't ship right? One or two doesn't draw they same attention as hundreds loaded into one container.


Customs does not have time to inspect every last item. I suspect it'll be x-rayed, show up as some random car part, and go right through.

[NPuter]

Anyone remember what the final price was on the grill ? I thought it was $174.99

I just looked at the info again and I think it changed


Cost of Items: $205.00

Credit Card Fee: $5.87

Shipping & Handling: $40.00

Total: $250.87

Paid: $220.86

Refund: $-30.01

Refund Status: Issued on June 19th, 2012

You placed the order before the GB had reached the final tier - you were refunded the $30 when the $174.99 tier was reached.

[SASKCHAUCH]

Naw I waited until it was $174.99, just want this thing already hahahahah blaaahhhhhhhhhh I'm itching to do another mod