PDA

View Full Version : ^Name of these sensors



fbdohc
04-26-2012, 10:44 AM
http://img.happywrenching.com/audi/a4/a4-connectors.jpg
I'm trying to explain to the seller in a dealer ship, on the phone, that i need the retaining clip of those sensors ...
lol

walky_talky20
04-26-2012, 11:08 AM
The sensor at the bottom right is the vehicle speed sensor:
http://www.ecstuning.com/Audi-B5_A4-Quattro-V6_30v/Drivetrain/Transmission/Electrical/ES266265/

At top right is the reverse switch connector.

You cannot buy just the metal clips from the dealer. You would have to buy the entire harness connector. This won't mean anything to your Audi dealership parts guy, but these connectors are called AMP Junior Timer connectors.

Reverse switch connector (5-pin "female", harness side):
Audi Part# 443-906-235
http://www.ecstuning.com/Search/443906235/
Reference: http://www.audizine.com/forum/showthread.php/443259-*DIY*-Making-your-REVERSE-lights-work-after-a-5-speed-swap

Vehicle Speed Sensor (VSS) connector (3-pin "female", harness side):
Audi Part# 443-906-233
http://www.ecstuning.com/Search/443_906_233/ES359795/
http://www.efiexpress.com/catalog/product_info.php?products_id=62

fbdohc
04-26-2012, 11:27 AM
Yup thats what he just told me :(
damn
20$ only for a retaining clip...

walky_talky20
04-26-2012, 11:38 AM
I can hook you up with the 3-pin one for cheap. But I'm fresh out of the 5-pin stuff. Check a junkyard for the car suggested in my DIY. A manual shift version of that car ought to have 3 of those 5-pin guys on it.

catbed
04-26-2012, 01:46 PM
I can hook you up with the 3-pin one for cheap. But I'm fresh out of the 5-pin stuff. Check a junkyard for the car suggested in my DIY. A manual shift version of that car ought to have 3 of those 5-pin guys on it.

x2, look for pretty much any german cars, they all use similar connectors.

fbdohc
04-26-2012, 07:04 PM
Thanks ... i'll figure out something