*** 034Motorsport - B7 Audi A4 Bestsellers! ***

[034Motorsport]

http://gallery.034motorsport.com/var/albums/Misc/Audizine-Media/034_AZ_BG_Small.png (?utm_source=audizine&utm_medium=forum&utm_content=logolink&utm_campaign=B7%2BProducts%2BApril%2B2012)
We've put together a list of our best-selling B7 Audi A4 products! Feel free to PM or email me if you'd like to order, or have any questions regarding specific products. [up]

Engine:

B7 Audi A4 2.0T FSI Catch Can Kit (http://www.034motorsport.com/engine-components-20t-fsi-catch-can-kit-b7-audi-a4-20t-fsi-p-21878.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

Our catch can kit is engineered to completely eliminate the most problematic assembly of the factory PCV system. This kit was designed to offer bolt-on installation and hassle-free use, with a fully-recirculating design and oil drain system to ensure that the can never has to be emptied.


http://www.034motorsport.com/images/B7_TFSI_Catch_Can_Kit_1.jpg (http://www.034motorsport.com/engine-components-20t-fsi-catch-can-kit-b7-audi-a4-20t-fsi-p-21878.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B7 Audi A4 2.0T FSI High-Flow Catalytic Converter (HFC) (http://www.034motorsport.com/engine-components-20t-fsi-high-flow-catalytic-converter-b7-audi-a4-20t-fsi-p-19185.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

034Motorsport High-Flow Catalytic Converters are designed to replace the restrictive OE catalytic converter, and allow for quicker spool while increasing horsepower and torque throughout the powerband. We've seen gains of over 27WTQ and 33WHP on our dyno on stock turbo tunes.


http://www.034motorsport.com/images/B7_FSI_HFC_1.jpg (http://www.034motorsport.com/engine-components-20t-fsi-high-flow-catalytic-converter-b7-audi-a4-20t-fsi-p-19185.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B7 Audi A4 2.0T FSI High-Flow Silicone Turbo Inlet Hose (http://www.034motorsport.com/engine-components-20t-fsi-turbo-inlet-hose-high-flow-silicone-b7-a4-20t-fsi-p-19527.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

This silicone turbo inlet hose offers increased flow, better throttle response, and enhanced turbo sound over the stock piece.


http://www.034motorsport.com/images/B7_FSI_Turbo_Inlet_1.jpg (http://www.034motorsport.com/engine-components-20t-fsi-turbo-inlet-hose-high-flow-silicone-b7-a4-20t-fsi-p-19527.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B7 Audi A4 2.0T FSI Silicone Intercooler Hose Set (http://www.034motorsport.com/engine-components-20t-fsi-intercooler-hose-set-silicone-b7-20t-fsi-p-19529.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

Replace you failure-prone factory rubber intercooler hoses with 034Motorsport's high-quality silicone replacements.


http://www.034motorsport.com/images/B7_IC_Hose_1.jpg (http://www.034motorsport.com/engine-components-20t-fsi-intercooler-hose-set-silicone-b7-20t-fsi-p-19529.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B7 Audi A4 2.0T FSI Intake Manifold Boost Tap (http://www.034motorsport.com/engine-components-20t-fsi-intake-manifold-boost-tap-20t-fsitfsitsi-p-21941.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

This CNC-machined billet aluminum piece installs between the intake manifold and factory PCV breather hose, providing a manifold pressure reference for aftermarket boost gauges.


http://www.034motorsport.com/images/FSI_Boost_Tap_1.jpg (http://www.034motorsport.com/engine-components-20t-fsi-intake-manifold-boost-tap-20t-fsitfsitsi-p-21941.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

Drivetrain:

B7 Audi A4 2.0T FSI Spec Clutch Package Lightweight Aluminum Flywheel (http://www.034motorsport.com/clutches-flywheels-034motorsport-clutch-flywheel-packages-b7-audi-a4-20t-fsi-spec-clutch-package-wflywheel-p-19874.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

Our lightweight aluminum flywheel is paired with a 240mm Spec clutch kit to replace the heavy dual-mass flywheel and clutch assembly, resulting in increased performance, and improved pedal feel.


http://www.034motorsport.com/images/B7_LWFW_Spec_1.jpg (http://www.034motorsport.com/clutches-flywheels-034motorsport-clutch-flywheel-packages-b7-audi-a4-20t-fsi-spec-clutch-package-wflywheel-p-19874.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B7 Audi A4 2.0T FSI Southbend Clutch Package with Lightweight Aluminum Flywheel (http://www.034motorsport.com/clutches-flywheels-southbend-clutches-flywheels-b7-audi-a4-20t-fsi-southbend-clutch-package-wflywheel-p-19871.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

Our lightweight aluminum flywheel is paired with a 240mm Southbend clutch kit to replace the heavy dual-mass flywheel and clutch assembly, resulting in increased performance, and improved pedal feel.


http://www.034motorsport.com/images/B7_LWFW_SB_1.jpg (http://www.034motorsport.com/clutches-flywheels-southbend-clutches-flywheels-b7-audi-a4-20t-fsi-southbend-clutch-package-wflywheel-p-19871.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B7 Audi A4 Driveshaft Support Replacement (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-driveshaft-support-b6b7-audi-a4-c5-audi-chassis-p-21222.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

This replacement driveshaft support is manufactured in-house at 034Motorsport, and allows you to replace the factory part without having to buy a new driveshaft.


http://www.034motorsport.com/images/B6%20Driveshaft%20Support%20.jpg (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-driveshaft-support-b6b7-audi-a4-c5-audi-chassis-p-21222.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B6/B7 Audi A4 Polyurethane Snub Mount (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-snub-mount-poly-b6b7-a4s4-and-c5c6-a6s6allroad-p-13300.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

This performance polyurethane snub mount is designed to increase stabilization of the motor under acceleration.


http://www.034motorsport.com/images/PolySnubMountB6.jpg (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-snub-mount-poly-b6b7-a4s4-and-c5c6-a6s6allroad-p-13300.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B6/B7 Audi A4 Snub Mount Bracket (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-snub-bracket-b6-18t-and-b7-20t-fsi-p-17935.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

This snub mount bracket is designed to work in conjunction with the polyurethane snub mount to further limit engine movement under load.


http://www.034motorsport.com/images/B6SnubberBracket.jpg (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-snub-bracket-b6-18t-and-b7-20t-fsi-p-17935.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B6/B7 Audi A4 034Motorsport Density Line Motor Mounts (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-motor-mount-density-line-b5-b6-b7-c5-and-many-others-p-772.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

Density Line Motor Mounts are completely re-engineered for performance. Our mounts are free of voids and hydraulic fluid, and feature steel bases. They provide a secure mounting solution, limiting drivetrain slop, while offering vastly increased longevity and durability over stock mounts.


http://www.034motorsport.com/images/SS_MotorTrannyMts2.jpg (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-motor-mount-density-line-b5-b6-b7-c5-and-many-others-p-772.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B6/B7 Audi A4 034Motorsport Density Line Transmission Mounts (Manual) (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-transmission-mount-density-line-manual-transmission-b6b7-audi-a4s4rs4-p-1062.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

Density Line Transmission Mounts are constructed from high-durometer rubber. They reduce play in the shifter, limit drivetrain slop, and are much more durable than stock.


http://www.034motorsport.com/images/TrannyMountB6_A4.jpg (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-transmission-mount-density-line-manual-transmission-b6b7-audi-a4s4rs4-p-1062.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B6/B7 Audi A4 034Motorsport Density Line Transmission Mount (CVT/Tiptronic) (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-transmission-mount-density-line-cvttiptronic-b6b7c5-audi-a4s4s6rs6-p-22499.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

Density Line Transmission Mounts are constructed from high-durometer rubber. They reduce play in the shifter, limit drivetrain slop, and are much more durable than stock.


http://www.034motorsport.com/images/C5_A6_Transmission_Mount.jpg (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-transmission-mount-density-line-cvttiptronic-b6b7c5-audi-a4s4s6rs6-p-22499.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B6/B7 Audi A4 Quattro Polyurethane Rear Differential Mount (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-rear-diff-mount-poly-b6b7-chassis-p-18255.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

This performance polyurethane and billet aluminum rear differential mount is designed to increase stabilization of the differential under changing loads.

Suspension:

B7 Audi A4/S4/RS4 034Motorsport Density Line Adjustable Upper Control Arm Kit (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-034motorsport-density-line-adjustable-upper-control-arm-kit-fits-b5b6b7c5-p-20218.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

Fully adjustable upper control arms are perfect for those who have lowered their car from OEM ride height and now have excessive camber.


http://www.034motorsport.com/images/ControlArmKitAdj007.jpg (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-034motorsport-density-line-adjustable-upper-control-arm-kit-fits-b5b6b7c5-p-20218.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B7 Audi A4/S4/RS4 034Motorsport Density Line Complete Control Arm Kit (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-control-arm-kit-density-line-oe-b6-and-b7-a4-and-s4-p-20223.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

The bushings in our Density Line Control Arms are completely re-engineered out of higher-durometer rubber for performance. They offer better performance and increased longevity and durability over stock arms.


http://www.034motorsport.com/images/CASet1.jpg (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-control-arm-kit-density-line-oe-b6-and-b7-a4-and-s4-p-20223.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B7 Audi A4/S4/RS4 034Motorsport Density Line Strut Mounts (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-strut-mount-front-density-line-b6b7-a4s4-c7-a6s6a7-p-21997.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

These strut mounts are manufactured using 85 durometer rubber, which is approximately 100% stiffer than stock. The increased firmness results in excellent upper strut location with minimal deflection or movement.


http://www.034motorsport.com/images/B7_Strut_Mount_2A.jpg (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-strut-mount-front-density-line-b6b7-a4s4-c7-a6s6a7-p-21997.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B7 Audi A4/S4/RS4 034Motorsport Sway Bar End Links (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-sway-bar-end-link-pair-front-motorsport-b5-b6-b7-c5-audi-a4-s4-a6-s6-p-21256.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

These sway bar end links feature billet aluminum construction and polyurethane bushings for increased precision and lack of deflection. Will noticeably improve sway bar function, including faster response to transient movements and decreased body roll.


http://www.034motorsport.com/images/B5%20Swaybar%20Endlink%20a.jpg (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-sway-bar-end-link-pair-front-motorsport-b5-b6-b7-c5-audi-a4-s4-a6-s6-p-21256.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

B7 Audi RS4 Sway Bar Upgrade (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-rear-sway-bar-b6b7-quattro-oe-rs4-upgrade-p-18768.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

Looking to counter understeer and reduce body roll in your B6 /B7 A4/S4? Upgrade your factory rear sway bar with the beefy OE Audi 22mm solid rear sway bar from the B7 RS4!


http://www.034motorsport.com/images/B7_RS4_RSB_Kit.jpg (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-rear-sway-bar-b6b7-quattro-oe-rs4-upgrade-p-18768.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

Wheels:

Wheel Stud and Nut Kit, M14x1.5 (http://www.034motorsport.com/chassis-components-audi-40008090urq-wheel-stud-and-nut-kit-m14x15-p-18227.html?utm_source=audizine&utm_medium=forum&utm_content=textlink&utm_campaign=B7%2BProducts%2BApril%2B2012)

Replace the annoying factory wheel bolts with our wheel stud an nut kit, and make swapping wheels a breeze!


http://www.034motorsport.com/images/WheelStudWNut1.jpg (http://www.034motorsport.com/chassis-components-audi-40008090urq-wheel-stud-and-nut-kit-m14x15-p-18227.html?utm_source=audizine&utm_medium=forum&utm_content=imagelink&utm_campaign=B7%2BProducts%2BApril%2B2012)

[doublezero30]

i dont get it.

[034Motorsport]

i dont get it.
It's a thread, whoring out all of our B7 products, right there, in your browser, which appears on your monitor, which is right in your face.

I forgot to add pictures of Mila Kunis to make it better:

http://images.askmen.com/celebs/women/actress_100/135_mila_kunislarge_image-1.jpg

http://img2.timeinc.net/people/i/2011/database/110221/mila-kunis-300.jpg

[vandelizer]

Oh now he gets it!

[Flexcj5]

All of them are 50% off for the next week right?

[djp2]

All of them are 50% off for the next week right?

X2 =D

[ericpaulyoung]

That catch can kit is calling my name. And the idea of not having to empty it ever is tits! I know people get all up in arms about draining back to the engine, but these people are missing that the point of a catch can is to prevent the yuck from getting into the intake track; it doesnt hurt the crank shaft or pistons etc as long as you change your oil enough. I figure that if you are enthusiast enough to install a catch can on your ride, you can afford to change your oil regularly. Now I just need to scrape up another couple a hun to add this to the pre summer build-a-thon.
Eric

[vwgtivr6]

A big thank you to Chris, Laszlo, Dan and the team at 034!!

Laszlo and Dan, thanks for hooking me up with the HFC and stage 2 flash today.

Chris, thanks for fitting me in at the last minute for the install. And the shop tour.

You guys rock!

Ken

[ericpaulyoung]

A big thank you to Chris, Laszlo, Dan and the team at 034!!

Laszlo and Dan, thanks for hooking me up with the HFC and stage 2 flash today.

Chris, thanks for fitting me in at the last minute for the install. And the shop tour.

You guys rock!

Ken

Laszlo has helped me out and spent time to answer my questions at least a dozen times. Even when they are a little noob. Top notch crew and a quality shop all the way around.
- Eric

[NorcalPB]

I love people as knowledgeable as ya'll 30 minutes from where I love. I'm for sure ordering your snub mount bracket.

Any chances you guys will release rear sway bar end links? IIRC those end links are for the front. Having adjustable end links like the A3 would be a huge plus for this platform just sayinnnnn

[034Motorsport]

Thanks for the kind words, guys!


Any chances you guys will release rear sway bar end links? IIRC those end links are for the front. Having adjustable end links like the A3 would be a huge plus for this platform just sayinnnnn
Yes! We've already tested prototypes and are waiting to machine the final versions. [:)]

[034Motorsport]

Thanks for the orders, everyone... [:)] More Mila Kunis pictures for you!

http://3.bp.blogspot.com/-C40GeZxtKUg/T1EAzG_zcPI/AAAAAAAARFk/04GvNPzrTv0/s400/091508_kunis_400x400.jpg

http://www.advocate.com/uploadedImages/ADVOCATE/PRINT_ISSUE/2011/1045/KUNISX390.jpg

http://28.media.tumblr.com/tumblr_luy874lC2M1qj4bm6o1_1280.jpg

[617 Bones]

http://28.media.tumblr.com/tumblr_luy874lC2M1qj4bm6o1_1280.jpg

Who's the newest fan of 034?? That's right... I am!!!

[Schweini]

PM sent

Really want the RS4 Sway and snub bracket. Can anyone who has either speak up for these? Are they worth the install?

[Tranzlogic]

PM sent

Really want the RS4 Sway and snub bracket. Can anyone who has either speak up for these? Are they worth the install?

Are you a 6MT or Tip tranny? The snub deterioarates on both but far earlier on the 6MT.

As for the sway, you bet! You will notice a difference big time. Our stock rear sway is a joke. I could probably bend it by hand lol.

I am really thinking about getting one along with a can. Maybe if we both got a rear sway at the same time Laszlo could hook us up a bit more?

[Tranzlogic]

Anyone on the fence I can say that Laszlo rocks! Great customer service and shipping is spot on. He is a pleasure to deal with. Oh, and 034 makes products that are tits. [:D]


My Mila contribution.

http://www.jakefinnegan.com/wp-content/uploads/2011/09/mila-kunis-hot11.jpg

[Schweini]

Are you a 6MT or Tip tranny? The snub deterioarates on both but far earlier on the 6MT.

As for the sway, you bet! You will notice a difference big time. Our stock rear sway is a joke. I could probably bend it by hand lol.

I am really thinking about getting one along with a can. Maybe if we both got a rear sway at the same time Laszlo could hook us up a bit more?

I have the Snub already installed, but noticed a lot of room still. So I was wondering if the bracket is even worth it. I'm running a TIP tranny. Good to know about the sway bar. Thanks Tranz

Laszlo, hook us up with a Rs4 Sway [up]

[Tranzlogic]

Laszlo, hook us up with a Rs4 Sway [up]

Yes!! [:D]

[kloeb2]

Ditto on the rear sway. Group buy!!?!

034 is gonna make me go broke. Just placed an order for their catch can kit and compressor inlet pipe a few days ago. :)

[schnell]

Laszlo, hook us up with a Rs4 Sway [up]

X3 !!!

[Tranzlogic]

So I see x4 up for a rear sway as of now. Hellz yes.

[mcmahonbj]

This is a nice thread!

[schnell]

This is a nice thread!

Agreed, now Laszlo hook us up!

[Mc Suly]

stud kit is hype

how does the catch can do in -35 degrees Celsius

[A 4 Awesome]

Personally I am saving up for the intercooler hose set.
034[up]

[034Motorsport]

Thanks for the feedback!


Laszlo, hook us up with a Rs4 Sway [up]

Ditto on the rear sway. Group buy!!?!

X3 !!!

So I see x4 up for a rear sway as of now. Hellz yes.

I am checking our inventory and looking at current pricing for the sway bars, bushings, and brackets, to see what we could do in terms of a Group Buy. [:)]


how does the catch can do in -35 degrees Celsius

In extremely cold climates, especially if you take lots of shorter trips, the drain line may become obstructed. I'd recommend running the kit without the drain line, and just draining he can manually every 5,000 miles or so. [up]

Edit - Forgot Mila... [facepalm]

http://4.bp.blogspot.com/--bmE-j12jZE/ThzrrnBfaiI/AAAAAAAAS08/3Xf6YtNVxok/s640/mila_kunis_swan.jpg

http://3.bp.blogspot.com/-EEYaqyXdKak/ThzrV9hTwFI/AAAAAAAASz8/KFEcNvFlyIc/s640/68721_Mila1_123_137lo.jpg

[Schweini]

Laszlo@034;7514331]Thanks for the feedback!






I am checking our inventory and looking at current pricing for the sway bars, bushings, and brackets, to see what we could do in terms of a Group Buy. [:)]



damn right, Thanks Laszlo!

(i'm also very interested in your HFC, I sent you a PM about it)

[Solarsuplex]

Dont mean to bash or start any arguments. But im not very happy with the quality of my stud kit. It works but is almost cheap feeling. Then again it was under 100$ for the set.

Might hafta look into those sway bar links though. They sound like a good idea when i ever put the rs4 bar on.

[Tranzlogic]

Dont mean to bash or start any arguments. But im not very happy with the quality of my stud kit. It works but is almost cheap feeling. Then again it was under 100$ for the set.

Might hafta look into those sway bar links though. They sound like a good idea when i ever put the rs4 bar on.

Curious man, what exactly can be "cheap feeling" about a stud and nut?

[konarider94]

I am checking our inventory and looking at current pricing for the sway bars, bushings, and brackets, to see what we could do in terms of a Group Buy. [:)]

this forum is going to make me poor, i just got weasel'd into the rai downpipe impulse i mean group buy.

[Tranzlogic]

^ Haha. Just wait until Laszlo comes back with the hookup on these RS4 bars. Cat-ching!

[Mister W]

Asking those who own them. Do the tranny mount, rear diff mount and strut mount make a big difference or improvement?

[Solarsuplex]

Curious man, what exactly can be "cheap feeling" about a stud and nut?

Excuse my vocab here. as i dont know the correct term or word for this. But there is a mounting hole? i guess. Its an allen key on the end of the bolt. All of them were off center and not even sized perfectly. I had a metric and standard key set and dont remember what i ended up using, but there was play and in turn the metal bent a bit. I dropped one of the nuts onto concrete from about 2 feet and part of the outer finish chipped right off and is already rusting a bit. Just not what i expected from such a well known and well reviewed company.

[BigRedAEM]

Quick question about the catch can. I'm from FL but I'm going to school in upstate NY and I have seen some stuff about cold weather negatively affecting catch can performance. Are there any issues with this one and freezing temperatures? Thanks

[dbens]

X5 on the RS4 sway bar

[034Motorsport]

Quick question about the catch can. I'm from FL but I'm going to school in upstate NY and I have seen some stuff about cold weather negatively affecting catch can performance. Are there any issues with this one and freezing temperatures? Thanks
The catch can will work fine, but you may want to consider getting it without the drain back to the oil pan, since the drain line can freeze with condensed water in extremely cold temperatures. You can just empty the can every ~5,000 miles or so.


X5 on the RS4 sway bar

Unfortunately, due to the rising cost of the parts from Audi, the best I could do for a GB on the RS4 Rear Sway Bar Upgrade Kit with Brackets and Bushings would be $160 plus shipping. [:|]

If you'd like any other items at the same time, we can offer you promotional pricing on those as well.

Feel free to shoot me a PM if you're interested!

[ericpaulyoung]

Laszlo,
Got the order, and I have to say the custom fabricated motor bracket is TOP NOTCH. More than I expected and very happy. Now let's see if the beauty fits as well as it looks!
- Eric

[Tranzlogic]

Excuse my vocab here. as i dont know the correct term or word for this. But there is a mounting hole? i guess. Its an allen key on the end of the bolt. All of them were off center and not even sized perfectly. I had a metric and standard key set and dont remember what i ended up using, but there was play and in turn the metal bent a bit. I dropped one of the nuts onto concrete from about 2 feet and part of the outer finish chipped right off and is already rusting a bit. Just not what i expected from such a well known and well reviewed company.

Yeah, that's no bueno. Sounds like bad quality control. Is it an 034 branded item or something they are just selling?

Everything I have purchased from them has been top notch and actually just ordered a few more goodies recently. Might be buying the entire density line control arm kit today or tomorrow but I am on the fence.

Speaking of which, anyone else running that?

[Solarsuplex]

Id assume they are made in house. And id rather know if they were being resold. Laszlo,.do you guys make the stud kits?

[branden]

If there is a group buy on the RS4 rear sway bar, I'd be interested too.

[Tranzlogic]

If there is a group buy on the RS4 rear sway bar, I'd be interested too.

Damn that's 6 people on the bar! With our powers combined...

[034Motorsport]

Who wants one of these? Who even knows what this is?

http://www.034motorsport.com/images/B6_B7_RSB_End_Link_Teaser.jpg (http://www.034motorsport.com/?utm_source=audizine&utm_medium=forum&utm_campaign=Laszlo%40034)

[ericpaulyoung]

It looks like a sex toy.
Eric

[Jay-Bee]

It looks like a sex toy.
Eric

lol

well it's heim jointed, but for some reason i can't put it in it's place? :S

[ericpaulyoung]

It is so short it has to be on the shifter.
- Eric

P.S. Still looks like a sex toy..

[034Motorsport]

Sigh... Adjustable rear sway bar end links!

No Mila Kunis pictures for you... [:|]

[Tranzlogic]

I thought it was a Flux Capacitor.

Mila Kunis loves Flux Capacitors.

[mschoeaz]

Damn that's 6 people on the bar! With our powers combined...
Count me in too for a rear sway bar!

[NorcalPB]

Who wants one of these? Who even knows what this is?

http://www.034motorsport.com/images/B6_B7_RSB_End_Link_Teaser.jpg (http://www.034motorsport.com/?utm_source=audizine&utm_medium=forum&utm_campaign=Laszlo%40034)

I'll actually take 2 of those. When will they be released? Hopefully they don't turn the car into an oversteer machine lol

[J.Owen]

Same as above. I keep snapping my end links so next time one breaks, i might as well go with something a little beefier.

[20bunnIY1633]

Whats the turnaround time on a HFC order? ive tried calling and got no answer

[BlazinB5]

here's the RS4 sway bar for those looking:
http://www.oemplus.com/swaybar-rear-rs4-p-783.html

[Tranzlogic]

here's the RS4 sway bar for those looking:
http://www.oemplus.com/swaybar-rear-rs4-p-783.html

It's "On Sale" and on "Backorder" at the same time lol. That's kinda odd.

I would rather order from Laszlo anyways as the regular price on that is $160.

[034Motorsport]

Whats the turnaround time on a HFC order? ive tried calling and got no answer
We have the B7 2.0T FSI HFCs in stock! [up]

When did you try calling us? We're open Monday-Friday 9:00 AM to 6:00 PM Pacific Time.

[20bunnIY1633]

We have the B7 2.0TY FSI HFCs in stock! [up]

When did you try calling us? We're open Monday-Friday 9:00 AM to 6:00 PM Pacific Time.

Thats prob the issue im calling from Jersey and i called first thing in the morning est. im going to try again today.

[034Motorsport]

Thats prob the issue im calling from Jersey and i called first thing in the morning est. im going to try again today.
Manage to get through? Shoot me a PM if not, and I'd be happy to help out.

[034Motorsport]

Adjustable Rear Sway Bar End Links are almost ready to go!

Due to the rising cost of the RS4 Rear Sway Bar, we've started development on a true performance-oriented solid rear sway bar for the B7 Audi A4, similar to our Audi TT RS Solid Rear Sway Bar (http://www.034motorsport.com/chassis-components-audi-tttt-stt-rs-034motorsport-solid-rear-sway-bar-audi-tt-rs-rs3-adjustable-p-22574.html?utm_source=audizine&utm_medium=forum&utm_campaign=Laszlo%40034).

[NorcalPB]

Just put on my 24mm rear bar, can't wait to snap the stock links and pick up yours!

[034Motorsport]

http://i45.tinypic.com/2ron67p.jpg

[NickDaQuick]

Can you give me the pricing on one mila kunis??

[GarrettReid]

less parts, more mila kunis

[TheKid23]

PM'd a question about front sway bar end links.

[AudiTFSI3o3]

Can you give me the pricing on one mila kunis??

x2 shipped to 80401

[J.Owen]

Any plans to produce a density line rear diff mount?

[Charles.waite]

Any plans to produce a density line rear diff mount?

http://soshable.com/wp-content/uploads/2012/09/shut-up-and-take-my-money.jpg

[034Motorsport]

http://www.034motorsport.com/images/B6_B7_Adjustable_Rear_Upper_Control_Arm_Teaser_5.j pg (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-control-arm-pair-motorsport-rear-upper-adjustable-b6b7-audi-a4s4rs4-p-23187.html?utm_source=audizine&utm_medium=forum&utm_campaign=B7%2BProducts%2BApril%2B2012)

http://25.media.tumblr.com/tumblr_mdfp9uUXrv1rksetoo1_500.jpg

[034Motorsport]

B6/B7 Audi A4/S4/RS4 Adjustable Rear Upper Control Arms (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-control-arm-pair-motorsport-rear-upper-adjustable-b6b7-audi-a4s4rs4-p-23187.html?utm_source=audizine&utm_medium=forum&utm_campaign=B7%2BProducts%2BApril%2B2012&utm_source=audizine&utm_medium=forum&utm_campaign=B7%2BProducts%2BApril%2B2012) are back in stock and ready to ship in time to get your car ready for the show season or upcoming track days:

http://www.034motorsport.com/images/B6_B7_Adjustable_Rear_Upper_Control_Arm_Teaser_6_S mall.jpg (http://www.034motorsport.com/chassis-components-audi-a4s4a6s6-control-arm-pair-motorsport-rear-upper-adjustable-b6b7-audi-a4s4rs4-p-23187.html?utm_source=audizine&utm_medium=forum&utm_campaign=B7%2BProducts%2BApril%2B2012&utm_source=audizine&utm_medium=forum&utm_campaign=B7%2BProducts%2BApril%2B2012)

Also, Mila Kunis:

http://images.askmen.com/2013_top_99/galleries/113-mila-kunis-1354126591.jpg

[B7AUDITURBO]

how does a group buy look like on the hfc ???[a4]

[Cantalk]

how does a group buy look like on the hfc ???[a4]
X eleventy twelve zillion two billion 9 hundred. And 2 cents.

[PNW Avant]

X eleventy twelve zillion two billion 9 hundred. And 2 cents.

In for the GB.



Thats group buy, not gang bang.

[B7AUDITURBO]

haha but serious GB BABY the are the consumers lol but no gang bang lol

[034Motorsport]

how does a group buy look like on the hfc ???[a4]

X eleventy twelve zillion two billion 9 hundred. And 2 cents.

In for the GB.
Anyone else? [:)]

[mec]

bump for a good advertiser. Lazlo always hooks it up! ....



unlike the other guys at 034

[seco007]

Damn that's 6 people on the bar! With our powers combined...


I'm in!!!!

[034Motorsport]

It has been far, far too long...

http://www.doyfama.net/wp-content/plugins/wp-o-matic/cache/6069b_mila-kunis-gq-2.jpeg

[kaz02a4]

Mila!!!!!

Did that group buy for the hfc go anywhere?

[034Motorsport]

Mila!!!!!

Did that group buy for the hfc go anywhere?
I don't think it did. [:|]

However, they are on sale for the rest of this weekend for $270! http://store.034motorsport.com/high-flow-catalytic-converter-b7-audi-a4-2-0t-fsi.html

[canadianA4B7]

How bout a sale on some motor mounts for a canadian builder! Or should i just wait till black friday?

[RAudiB7A4]

Love this thread. So much Mila! Win.

Probably going to be ordering a set of your Adjustable Upper Control Arms sometime come spring before dropping my coils back to summer ride height. 23.5" FTG was pretty tough on my tires this last summer.

[034Motorsport]

How bout a sale on some motor mounts for a canadian builder! Or should i just wait till black friday?
You might want to wait the two weeks or so until Black Friday. [;)]

[canadianA4B7]

You might want to wait the two weeks or so until Black Friday. [;)]

Thanx and my contribution

http://i1171.photobucket.com/albums/r541/canadianA4B7/image_zps3e3f4278.jpg (http://s1171.photobucket.com/user/canadianA4B7/media/image_zps3e3f4278.jpg.html)

http://i1171.photobucket.com/albums/r541/canadianA4B7/image_zpsc88d382c.jpg (http://s1171.photobucket.com/user/canadianA4B7/media/image_zpsc88d382c.jpg.html)

[034Motorsport]

Almost a year without Mila Kunis pictures? I have failed all of you. [:(]

http://www.heshestats.com/wp-content/uploads/2014/01/mila-kunis1.jpg

Solid Aluminum Rear Subframe Bushings (http://store.034motorsport.com/subframe-bushing-kit-billet-aluminum-b6-b7-audi-a4-s4-rs4-rear.html?utm_source=audizine&utm_medium=forum&utm_campaign=034-601-0011) are what all the cool kids are getting nowadays. [:)]

http://store.034motorsport.com/media/catalog/product/cache/1/image/250x250/8e3c886ca7be982fe01f40a38284b5ac/0/3/034motorsport_b6_b7_audi_a4_s4_rs4_billet_aluminum _rear_subframe_bushings_mount_kit_2.jpg (http://store.034motorsport.com/subframe-bushing-kit-billet-aluminum-b6-b7-audi-a4-s4-rs4-rear.html?utm_source=audizine&utm_medium=forum&utm_campaign=034-601-0011)

You can check out the rest of our B7 Audi A4 2.0T FSI Catalog (http://store.034motorsport.com/vehicle/?cat=2659&dir=asc&find=Audi-A4-B7_%282005-2008%29-2.0T_FSI-1143&order=name) right here: Clicky! (http://store.034motorsport.com/vehicle/?cat=2659&dir=asc&find=Audi-A4-B7_%282005-2008%29-2.0T_FSI-1143&order=name)

[LPS74]

Will there be any group buy for the rear sways?

[challenger]

Will there be any group buy for the rear sways?

or catch can???

[034Motorsport]

Will there be any group buy for the rear sways?

or catch can???
If there's enough interest, I'm sure we could do one for the catch cans! Our last Group Buy for the RSB closed fairly recently. Send me a PM if you missed it. [;)]

[MK1QuattroHaus]

group buy for the catch can? im in!

[034Motorsport]

group buy for the catch can? im in!
Anyone else? Let's get at least a couple more people to start, and we can set up a tiered pricing structure. [up]

[challenger]

Im in of course! Lets make it happen people!

[rudtf]

I'd be in for adjustable upper control arm kits.

[NolanB7]

Group buy for the hfc? Anyone interested if it is possible

[itschrees]

I'd be interested in the catch can group buy!

[challenger]

3 people for catch can lets go! lol

[034Motorsport]

3 people for catch can lets go! lol
Just need two more!

[SkillzVrt]

I'll be in for the Catch Can depending on what the price would be.

[challenger]

ONE MORE!

[034Motorsport]

Bump for one more who would be interested in a Catch Can Kit (http://store.034motorsport.com/catch-can-kit-b7-audi-a4-2-0t-fsi.html?utm_source=audizine&utm_medium=forum&utm_campaign=034-101-1002) Group Buy. [up]

034Motorsport Catch Can Kit, B7 Audi A4 2.0T FSI

http://store.034motorsport.com/media/catalog/product/cache/1/image/250x250/8e3c886ca7be982fe01f40a38284b5ac/B/7/B7_TFSI_Catch_Can_Kit_1.jpg (http://store.034motorsport.com/catch-can-kit-b7-audi-a4-2-0t-fsi.html?utm_source=audizine&utm_medium=forum&utm_campaign=034-101-1002)

[chucklando]

What do you guys have planned for Black Friday? I could really use a buy one, get one for motor mounts [:D]

[034Motorsport]

What do you guys have planned for Black Friday? I could really use a buy one, get one for motor mounts [:D]
I don't think they'll be that heavily discounted, but we should have them discounted at a level similar to last year's sale. [up]

Motor Mount, Density Line, B5, B6, B7, and C5 Audi Models

http://store.034motorsport.com/images/034motorsport-engine-mounts-density-line-street-track-b5-b6-b7-c5-audi-a4-s4-rs4-a6-allroad-034-509-0007-1.jpg (http://store.034motorsport.com/motor-mount-density-line-b5-b6-b7-and-c5.html?utm_source=audizine&utm_medium=forum&utm_campaign=034-509-0007)

[cool]

[challenger]

Bump bump bump! One more person for catch can group buy!

[034Motorsport]

While there doesn't seem to be enough interest for a Group buy on the Catch Can Kit, I have added it to our list of Black Friday sale items. Keep your eyes peeled for more info on that! [up]

[challenger]

While there doesn't seem to be enough interest for a Group buy on the Catch Can Kit, I have added it to our list of Black Friday sale items. Keep your eyes peeled for more info on that! [up]

Awesome! Is the RSB a part of the black Friday sale?


Sent from my iPhone using Tapatalk

[034Motorsport]

Awesome! Is the RSB a part of the black Friday sale?
Rumor has it that every 034Motorsport-branded product will be on sale. [;)]

[challenger]

Rumor has it that every 034Motorsport-branded product will be on sale. [;)]

Sweet!! [emoji16][emoji16] [emoji106][emoji106]


Sent from my iPhone using Tapatalk

[034Motorsport]

Happy Thanksgiving! [:)]

Most of the parts listed in this thread are now in featured our Black Friday Sale (http://store.034motorsport.com/blog/034motorsport-black-friday-sale-up-to-25-off-free-shwag/)!

http://store.034motorsport.com/media/mage_developers/bannerslider/image/Thanksgiving_Banner_2014.jpg

[034Motorsport]

Just released! [up]

Sway Bar End Links, Motorsport, Front, B5/B6/B7 Audi A4/S4/RS4 & C5 A6/S6 (http://store.034motorsport.com/sway-bar-end-links-motorsport-front-b5-b6-b7-c5-audi-a4-s4-a6-s6.html?utm_source=audizine&utm_medium=forum&utm_campaign=034-402-4018)

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/p526x296/10846079_10152607055788227_2980041100105852599_n.j pg?oh=45e6f948e4bcc0633c6e0dc8c52b9bb7&oe=5508514D&__gda__=1425910291_86bada59bfd2c6446675c3328fa5934 7