PDA

View Full Version : Seal66-05.5 Red'T' build thread



seal66
03-19-2012, 02:57 PM
First off, I will post pics up when I am back in town from Utah. I'll do a progression type picture thread if I can lol. I was bad at taking pics as I went along


Figured I would throw this down. Didn't really know if I should put it here or not. I have plans for the car and hopefully it falls through.

Anyways,

I bought the car in July of 2011 with 75k miles for 10k. It has a salvaged title from being in a front end accident. The car was repaired before I bought it. The repairs were decent, just needs to be more refined in lining the body panels up. I am slowly fixing this up. I don't know much about these cars other than what I have learned here and by tinkering with it.


So Far what has been done to the car is

Uni stage 2 w/HPFP w 91oct file-installed
Rev'D' DV-installed
BSH pcv Revamp stg1-installed
HPFP stg2- HPFPupgrade.com-installed
Prv 145bar- HPFPupgrade.com-installed
Godspeed FMIC-installed
Vast up-pipe
Red coil packs "D"-installed
Adam Rotors and EBC green stuff pads-installed
Evo Skid plate
Vast Stg 3 clutch-installed
Vast aluminum flywheel-installed
JHM SS trio-installed
034 Full CA density kit-installed
034 motor mounts-
034 tranny mount-
034 stub and stub bracket-
Apikol Diff mount-
Custom 2.5'' exhaust with mangaflows and Ebay test pipe-installed
Koni/Ebaich suspension-installed
NewSouth Performance boost gauge-installed
Front bumper-
Side skirts-



There is more but, this is all I can remember while I am out of town lol

My future plans....Gonna have to wait on that but, its a good one for the car

seal66
04-17-2012, 06:42 PM
Here are some pictures...

http://i221.photobucket.com/albums/dd203/JeepBumm68/281e2521.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/e9acf0d8.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/8ef8403f.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/cb691cee.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/1f6b6067.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/9372b54d.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/ae9bcef6.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/58966e2f.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/0b489dc4.jpg
Not pictured is the exhaust, rs4 swaybar, 034 snub mount, Vast stg3 clutch, trio SS kit.

Here are a few of the car--Yes I know it needs some body work done to it.
http://i221.photobucket.com/albums/dd203/JeepBumm68/78f7c61b.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/e47399ca.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/6793a8c7.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/86cb8b0d.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/a082d523.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/110566db.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/d2fb55d1.jpg

And the car has been on the dyno as well...very sad sad dyno btw.
http://i221.photobucket.com/albums/dd203/JeepBumm68/23fd38e8.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/d1cbdb3e.jpg

Operator
04-17-2012, 07:04 PM
You'll need to head up early sometime you are heading back to work, so we can do a quick drive!!!!!

ericpaulyoung
04-17-2012, 07:14 PM
Looks good. Let's see the dyno graph!
Eric

seal66
04-17-2012, 07:20 PM
I'll be heading back to colorado next monday(4/23), or tuesday(4/24)

And the dyno graph is way to hurtful to show lol.

The damn car never boosted over 15psi cause of tune software issues.

Operator
04-17-2012, 07:21 PM
Speaking of, I see you got the 3rd fan treatment. I received no such love!!!!

seal66
04-17-2012, 07:24 PM
I forgot they setup the 3rd fan lol. By the 3rd pull the car straight up fell on its face btw.

AudiTFSI3o3
04-17-2012, 08:13 PM
nice man! Quartz gray right?

seal66
04-17-2012, 08:37 PM
Ya quartz grey metallic. I love the color, but the cars needs a refresh on the paint, a new front bumper( its sitting in garage), and some small body work and panel alignment

DRAKLORE
04-17-2012, 08:45 PM
Haha I feel you in the body work and needing a bumper ._. But I may be lucky enough to pick up jmarches bumper.

I like that color, I thought beige/gold in the first pics!
Can't wait to see some
More progress

seal66
04-17-2012, 08:52 PM
ya, I hate having it looks rough but, I figured get the car running right first then move onto the body.

good deal man. your car already looks dope.

ya the sun was hitting the car just right.

thanks.

Operator
05-10-2012, 02:01 PM
You are buying sooo many "extracurricular parts" lets hurry up and just decide on a turbo and get on with it!!!!!

drumnjuny
05-10-2012, 02:07 PM
^^ haha. its a killer deal though!

ericpaulyoung
05-10-2012, 02:21 PM
You are buying sooo many "extracurricular parts" lets hurry up and just decide on a turbo and get on with it!!!!!

I vote GTX2863 if you don't mind the look under the hood, and well you know what I like if you want to retain the stock look.

http://i1073.photobucket.com/albums/w381/ericpaulyoung/GTX2863R-vs-GT2860RS.jpg

DRAKLORE
05-10-2012, 03:27 PM
BM+ buddies :-)

seal66
05-10-2012, 04:31 PM
Ha ha thanks guys. Yes I have a lot of extra goodies since I do plan on going BT. I wish I had a exact idea of which one.

Bm+ lol

Charles.waite
05-10-2012, 05:56 PM
http://i221.photobucket.com/albums/dd203/JeepBumm68/1f6b6067.jpg

FYI that motor mount is toast...

EDIT: NM, didn't fully read the first post... DERP!

jimrobbington
05-11-2012, 07:52 AM
Will Matt install the motor mounts while it's in his care?

seal66
05-12-2012, 04:00 PM
I never did ask him if you could just throw those in since he would have the front apart anyways lol