Seal66-05.5 Red'T' build thread

[seal66]

First off, I will post pics up when I am back in town from Utah. I'll do a progression type picture thread if I can lol. I was bad at taking pics as I went along


Figured I would throw this down. Didn't really know if I should put it here or not. I have plans for the car and hopefully it falls through.

Anyways,

I bought the car in July of 2011 with 75k miles for 10k. It has a salvaged title from being in a front end accident. The car was repaired before I bought it. The repairs were decent, just needs to be more refined in lining the body panels up. I am slowly fixing this up. I don't know much about these cars other than what I have learned here and by tinkering with it.


So Far what has been done to the car is

Uni stage 2 w/HPFP w 91oct file-installed
Rev'D' DV-installed
BSH pcv Revamp stg1-installed
HPFP stg2- HPFPupgrade.com-installed
Prv 145bar- HPFPupgrade.com-installed
Godspeed FMIC-installed
Vast up-pipe
Red coil packs "D"-installed
Adam Rotors and EBC green stuff pads-installed
Evo Skid plate
Vast Stg 3 clutch-installed
Vast aluminum flywheel-installed
JHM SS trio-installed
034 Full CA density kit-installed
034 motor mounts-
034 tranny mount-
034 stub and stub bracket-
Apikol Diff mount-
Custom 2.5'' exhaust with mangaflows and Ebay test pipe-installed
Koni/Ebaich suspension-installed
NewSouth Performance boost gauge-installed
Front bumper-
Side skirts-



There is more but, this is all I can remember while I am out of town lol

My future plans....Gonna have to wait on that but, its a good one for the car

[seal66]

Here are some pictures...

http://i221.photobucket.com/albums/dd203/JeepBumm68/281e2521.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/e9acf0d8.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/8ef8403f.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/cb691cee.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/1f6b6067.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/9372b54d.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/ae9bcef6.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/58966e2f.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/0b489dc4.jpg
Not pictured is the exhaust, rs4 swaybar, 034 snub mount, Vast stg3 clutch, trio SS kit.

Here are a few of the car--Yes I know it needs some body work done to it.
http://i221.photobucket.com/albums/dd203/JeepBumm68/78f7c61b.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/e47399ca.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/6793a8c7.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/86cb8b0d.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/a082d523.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/110566db.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/d2fb55d1.jpg

And the car has been on the dyno as well...very sad sad dyno btw.
http://i221.photobucket.com/albums/dd203/JeepBumm68/23fd38e8.jpg
http://i221.photobucket.com/albums/dd203/JeepBumm68/d1cbdb3e.jpg

[Operator]

You'll need to head up early sometime you are heading back to work, so we can do a quick drive!!!!!

[ericpaulyoung]

Looks good. Let's see the dyno graph!
Eric

[seal66]

I'll be heading back to colorado next monday(4/23), or tuesday(4/24)

And the dyno graph is way to hurtful to show lol.

The damn car never boosted over 15psi cause of tune software issues.

[Operator]

Speaking of, I see you got the 3rd fan treatment. I received no such love!!!!

[seal66]

I forgot they setup the 3rd fan lol. By the 3rd pull the car straight up fell on its face btw.

[AudiTFSI3o3]

nice man! Quartz gray right?

[seal66]

Ya quartz grey metallic. I love the color, but the cars needs a refresh on the paint, a new front bumper( its sitting in garage), and some small body work and panel alignment

[DRAKLORE]

Haha I feel you in the body work and needing a bumper ._. But I may be lucky enough to pick up jmarches bumper.

I like that color, I thought beige/gold in the first pics!
Can't wait to see some
More progress

[seal66]

ya, I hate having it looks rough but, I figured get the car running right first then move onto the body.

good deal man. your car already looks dope.

ya the sun was hitting the car just right.

thanks.

[Operator]

You are buying sooo many "extracurricular parts" lets hurry up and just decide on a turbo and get on with it!!!!!

[drumnjuny]

^^ haha. its a killer deal though!

[ericpaulyoung]

You are buying sooo many "extracurricular parts" lets hurry up and just decide on a turbo and get on with it!!!!!

I vote GTX2863 if you don't mind the look under the hood, and well you know what I like if you want to retain the stock look.

http://i1073.photobucket.com/albums/w381/ericpaulyoung/GTX2863R-vs-GT2860RS.jpg

[DRAKLORE]

BM+ buddies :-)

[seal66]

Ha ha thanks guys. Yes I have a lot of extra goodies since I do plan on going BT. I wish I had a exact idea of which one.

Bm+ lol

[Charles.waite]

http://i221.photobucket.com/albums/dd203/JeepBumm68/1f6b6067.jpg

FYI that motor mount is toast...

EDIT: NM, didn't fully read the first post... DERP!

[jimrobbington]

Will Matt install the motor mounts while it's in his care?

[seal66]

I never did ask him if you could just throw those in since he would have the front apart anyways lol