Seerlah
03-13-2012, 04:12 PM
Filter: Injen x-1014-bb (3" inlet, 6" base, 5" height, 4" top, 55 pleat, dry filter)
Pre-filter (water repellent): Injen x-1033-BLK (designed to fit over x-1014-bb filter)
Heat Shield: Injen HS500P (you can judge by the picture; not quite sure what description to put here)
There is slight damage to all components, but not big. I tried to use this on my turbo application, but is was a no go. I need a shorter height filter. What I did to try and make it fit was raise the engine, place the units on, then lower the engine back down. The pics show the end result.
-The filter has a couple bent in mesh parts. Not huge, but they exist. They won't be seen with the pre-filter placed on, though.
-The pre-filter also took a minor hit on one section (I took the pic with no flash, no overlapping of the pre-filter, and white wall background so you can get the best picture of the damage. once again, not a big deal)
-Heat shield got scratched by my driveway. Tried to show it as much as I can.
Damage pics of filter. Those are on 2 different sides. No other damage.
http://i228.photobucket.com/albums/ee147/seerlah/DSC03365.jpg
http://i228.photobucket.com/albums/ee147/seerlah/DSC03366.jpg
Damage of pre-filter (no big deal)
http://i228.photobucket.com/albums/ee147/seerlah/DSC03372.jpg
Scratches on heat shield (tried to take the best pics I can, but items like this have an inevitable fate of be scratched sooner or later). You can try and polish them out, if you want.
http://i228.photobucket.com/albums/ee147/seerlah/DSC03368.jpg
All assembled.
http://i228.photobucket.com/albums/ee147/seerlah/DSC03373.jpg
http://i228.photobucket.com/albums/ee147/seerlah/DSC03375.jpg
I am looking to get $75 shipped in the continental US for everything (outside the 48 states, contact me for shipping quote). I think that is a fair price, as I will be taking roughly a $50 loss on them and they have never been used. Minus the damage I showed you, that's about it. These are brand new never used items, with just the slight damage pictured. All items are washable. I am a huge Amsoil fan, and use their fluids in my motor, tranny, and soon to be power steering (brake fluid is Motul 5.1). This filter is also made by them. Any questions, feel free to ask.
-Mitch
Pre-filter (water repellent): Injen x-1033-BLK (designed to fit over x-1014-bb filter)
Heat Shield: Injen HS500P (you can judge by the picture; not quite sure what description to put here)
There is slight damage to all components, but not big. I tried to use this on my turbo application, but is was a no go. I need a shorter height filter. What I did to try and make it fit was raise the engine, place the units on, then lower the engine back down. The pics show the end result.
-The filter has a couple bent in mesh parts. Not huge, but they exist. They won't be seen with the pre-filter placed on, though.
-The pre-filter also took a minor hit on one section (I took the pic with no flash, no overlapping of the pre-filter, and white wall background so you can get the best picture of the damage. once again, not a big deal)
-Heat shield got scratched by my driveway. Tried to show it as much as I can.
Damage pics of filter. Those are on 2 different sides. No other damage.
http://i228.photobucket.com/albums/ee147/seerlah/DSC03365.jpg
http://i228.photobucket.com/albums/ee147/seerlah/DSC03366.jpg
Damage of pre-filter (no big deal)
http://i228.photobucket.com/albums/ee147/seerlah/DSC03372.jpg
Scratches on heat shield (tried to take the best pics I can, but items like this have an inevitable fate of be scratched sooner or later). You can try and polish them out, if you want.
http://i228.photobucket.com/albums/ee147/seerlah/DSC03368.jpg
All assembled.
http://i228.photobucket.com/albums/ee147/seerlah/DSC03373.jpg
http://i228.photobucket.com/albums/ee147/seerlah/DSC03375.jpg
I am looking to get $75 shipped in the continental US for everything (outside the 48 states, contact me for shipping quote). I think that is a fair price, as I will be taking roughly a $50 loss on them and they have never been used. Minus the damage I showed you, that's about it. These are brand new never used items, with just the slight damage pictured. All items are washable. I am a huge Amsoil fan, and use their fluids in my motor, tranny, and soon to be power steering (brake fluid is Motul 5.1). This filter is also made by them. Any questions, feel free to ask.
-Mitch