Many MANY big props to 034, again! More pics this weekend.

[9Hooker]

Thanks again to Laszlo and the guys at 034 for a fantastic shopping experience.

Newest mods/maintenance:

Southbend Stage 2 Daily clutch
034 flywheel
Apikol rear diff mount
JHM trio (shifter, bushing, linkage)
JHM 4:1 center diff
Another awesome 034 shirt!

The diff is going to be a week out since JHM has no 02X cores, but it's coming.

Single pic for now:
https://lh4.googleusercontent.com/-kfqv3_dqkp4/T1lbZ75jLHI/AAAAAAAABI4/bOJeO7K988o/s800/DSC_0002.jpg

UPDATE:
Apikol rear diff mount installed. Pretty straight forward. Start to finish in under an hour using a lift and hand tools. All 4 bolts are in a very small area. Can be done with jackstands but a lift always makes things much easier. JHM shifter installed, took 1.5 hours due to some difficulty of the sizing of my snap ring pliers. The car has a difficult time finding reverse. Sometimes it's there, sometimes not no matter how hard I struggle. I tried many adjustments to no avail. Also the JHM preloaded (32%) reduction in throw is ludicrous. Like idiotic, reminds me of back in the day when people would cut the tops of their shifters and move the knob lower. I'm going to the least amount of reduction (15%) when I finally do the clutch and linkage end. On that note, I realized I don't own any triple squares. No one on this blasted island knows what they are to boot. So I ordered a set and will try the clutch and linkage next weekend.

Gratuitous brag video. Turn sound down. PLEASE DO NOT QUOTE THE VIDEO!

http://www.youtube.com/watch?v=cBLg2iH_v0g

[Operator]

Are you doing some type of DAC training?

[Turbwhistle]

034 is just that good, they made his car into a plane.

[Charles.waite]

Pattern looked full there, Ghostrider.








SERIOUSLY, I hate you. [drool]


I think if I flew a plane I would seriously have Top Gun music playing in my head 24/7...

[9Hooker]

Im sure people haven't been following because the mods have come over some time.


APR Stage 1
OEM Sport Springs
Koni Yellows
RS4 Rear sway bar
ECS underdrive pulley
034 HFC
VMR RS4 reps in 19", 245/40 tires
Steel braided brake lines
10" sub enclosure where the net goes in the trunk
stereo gear
wheel studs

[9Hooker]

Are you doing some type of DAC training?

In this video, just coming in to land.

[Charles.waite]

Your mod list is almost exactly what I'd like my car to be at. I commend you on your choices so far! I'm interested to see how you like the southbend clutch.

[crazytex21]

Im sure people haven't been following because the mods have come over some time.


APR Stage 1
OEM Sport Springs
Koni Yellows
RS4 Rear sway bar
ECS underdrive pulley
034 HFC
VMR RS4 reps in 19", 245/40 tires
Steel braided brake lines
10" sub enclosure where the net goes in the trunk
stereo gear
wheel studs



did you notice any gains with the ECS UD pulley? i know it frees up some power, just wondered how noticeable it was.

[DRAKLORE]

It is noticeable, maybe not for the money though. I have the Nuespeed one.

[Operator]

In this video, just coming in to land.


Guess I should have said, did you just finish?

[crazytex21]

It is noticeable, maybe not for the money though. I have the Nuespeed one.

roger that sir. i will probably wait on it then.

[Cottonmouth]

In this video, just coming in to land.

Looks like an F-5.

Nicely done.

[DRAKLORE]

Because its "rotating mass" on the crankshaft.
It's much similar to a lwfw in effects. I don't recall the weight of the OE harmonic balanced pulley. I'm guessing (6-8lbs) and the Nuespeed pulley is around .8lbs iirc. So that's a pretty good drop without the cost of a lwfw.
My theory is prob flawed but that's my brain

[9Hooker]

It is noticeable, maybe not for the money though. I have the Nuespeed one.


already discussed.
http://www.audizine.com/forum/showthread.php/280502-My-ECS-Pulley-Install?p=4114303#post4114303

if anyone cares about pics, i can put them up again, it's just a 5% size difference and a few lbs.

[9Hooker]

Guess I should have said, did you just finish?

yes, most likely. i can't remember specifics but it was an adversary sortie.

[Operator]

yes, most likely. i can't remember specifics but it was an adversary sortie.

Yeh, that's what I was thinking.


And look out, because it looks like your dog is eye-balling your new clutch!!!

[034Motorsport]

Thanks for ordering from us, Alex! Feel free to let me know if you have any questions. [:)]

Hope you enjoy the lightweight flywheel; I've been running the first prototype we made almost 3 years ago. [up]

[jibatnes]

Ive been running the LWFL from 034 togheter with a spec 3+ clutch for 6 months now :) really happy with it. And the 034 diff mount as well. Great stuff :)

[DRAKLORE]

already discussed.
http://www.audizine.com/forum/showthread.php/280502-My-ECS-Pulley-Install?p=4114303#post4114303

if anyone cares about pics, i can put them up again, it's just a 5% size difference and a few lbs.
Good write up, in all honesty there is a bigger cost:gain margin with this pulley than a carbonio, most exhaust setups(not paired with tuning) and other simple mods people do for 5-10 HP

[9Hooker]

update in first post.

[BlackGecko]

http://www.youtube.com/watch?v=zCTJmXrgsFg

[Leo14]

What are you flying? I enjoyed that, it reminded me of BF3

[9Hooker]

Looks like an F-5.

Nicely done.

This

[9Hooker]

I realize I'm a pariah nowadays, but another set of PROPS to 034 Motorsport. CLICK HERE. (http://www.034motorsport.com/)

My second South Bend Clutch just arrived from those guys. I realize it's just being drop shipped, but the prompt, friendly service and great price from Laszlo and the other guys at 034 is fantastic!

KUDOS!